Papers - Yan, Jiwang

Electrocontact Discharge Dressing of a Resin-Bonded CBN Grinding Wheel and its Grinding Performance

J. Tamaki, A. Kubo, J. Yan, and K. Narita

Key Engineering Materials 238-239   327-332 2002.11

Research paper (scientific journal), Joint Work, Accepted

Development of a Polishing Disc Containing Granulated Fine Abrasives

H. Nakamura, J. Yan, K. Syoji and Y. Wakamatsu

Key Engineering Materials 238-239   257-262 2002.11

Research paper (scientific journal), Joint Work, Accepted

Three-Dimensional Shape Modeling of Diamond Abrasive Grains Measured by a Scanning Laser Microscope

T. Mahmoud, J. Tamaki and J. Yan

Key Engineering Materials 238-239   131-136 2002.11

Research paper (scientific journal), Joint Work, Accepted

Development of a Novel Ductile-Machining System for Fabricating Axisymmetrical Aspherical Surfaces on Brittle Materials

J. Yan, J. Tamaki, K. Syoji and T. Kuriyagawa

Key Engineering Materials 238-239   43-48 2002.11

Research paper (scientific journal), Joint Work, Accepted

Precision truing of a metal-bonded diamond grinding wheel by means of an envelope generation method

J. Xie, A. Kubo, J. Tamaki, J. Yan

Journal of the Japan Society for Abrasive Technology 46 ( 10 ) 521-526 2002.10

Research paper (scientific journal), Joint Work, Accepted

Electro-contact discharge dressing of a resin-bonded CBN grinding wheel using a low open-circuit voltage

A. Kubo, J. Tamaki, T. Sugino, J. Yan, K. Narita

Journal of the Japan Society for Abrasive Technology 46 ( 7 ) 348-353 2002.07

Research paper (scientific journal), Joint Work, Accepted

Fabrication of Large-Diameter Single-Crystal Silicon Aspheric Lens by Straight-Line Enveloping Diamond-Turning Method

J. Yan, K. Syoji, and T. Kuriyagawa

Journal of the Japan Society for Precision Engineering 68 ( 4 ) 561-565 2002.04

Research paper (scientific journal), Joint Work, Accepted

Ductile Regime Turning at Large Tool Feed

J. Yan, K. Syoji, T. Kuriyagawa and H. Suzuki

Journal of Materials Processing Technology 121 ( 2-3 ) 363-372 2002.02

Research paper (scientific journal), Joint Work, Accepted

Effect of Tool Wear on Diamond Cutting of Single Crystal Silicon

J. Yan, K. Syoji, and T. Kuriyagawa

Transactions of the Japan Society of Mechanical Engineers, Part C 67 ( 664 ) 3999-4004 2001.04

Research paper (scientific journal), Joint Work, Accepted

On the Ductile Machining of Silicon for Micro Electro-mechanical Systems (MEMS), Opto-electronic and Optical Applications

J. Yan, M. Yoshino, T. Kuriagawa, T. Shirakashi, K. Syoji and R. Komanduri

Materials Science and Engineering A 297 ( 1-2 ) 230-234 2001.02

Research paper (scientific journal), Joint Work, Accepted

Ductile-Brittle Transition at Large Negative Tool Rake Angles

J. Yan, K. Syoji, and T. Kuriyagawa

Journal of the Japan Society for Precision Engineering 66 ( 7 ) 1130-1134 2000.07

Research paper (scientific journal), Joint Work, Accepted

Chip Morphology of Ultra-Precision Diamond Turning of Single Crystal Silicon

J. Yan, K. Syoji, and T. Kuriyagawa

Journal of the Japan Society for Precision Engineering 65 ( 7 ) 1008-1012 1999.07

Research paper (scientific journal), Joint Work, Accepted

Study on Ultra-Precision Grinding of Micro Aspherical Surface (3rd Report): Micronizing of Aspherical Surface in Inclined Rotational Grinding

H. Suzuki, T. Kuriyagawa, T. Kuriyagawa, K. Tanaka, J. Yan, N. Wajima, K. Tanaka, and I. Miyoshi

Journal of the Japan Society for Precision Engineering 64 ( 9 ) 1350 - 1354 1998.10

Research paper (scientific journal), Joint Work, Accepted

Ductile Regime Turning of Single Crystal Silicon with a Straight-Nosed Diamond Tool

J. Yan, T. Kuriyagawa, T. Kuriyagawa, H. Suzuki

Journal of the Japan Society for Precision Engineering 64 ( 9 ) 1345 - 1349 1998.09

Research paper (scientific journal), Joint Work, Accepted