Papers - Yan, Jiwang
-
Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process
T. Zhou, J. Yan, J. Masuda, and T. Kuriyagawa
Journal of Materials Processing Technology 209 ( 9 ) 4484-4489 2009.10
Research paper (scientific journal), Joint Work, Accepted
-
Precision machining of microstructures on electroless-plated NiP surface for molding glass components
J. Yan, T. Oowada, T. Zhou, and T. Kuriyagawa
Journal of Materials Processing Technology 209 ( 10 ) 4802-4808 2009.10
Research paper (scientific journal), Joint Work, Accepted
-
Effect of Electrorheological Fluid Assistance for Micro Ultrasonic Machining
T. Tateishi, K. Shimada, N. Yoshihara, J. Yan, T. Kuriyagawa
Advanced Materials Research 76-78 148-152 2009.09
Research paper (scientific journal), Joint Work, Accepted
-
Processing Grinding-damaged Silicon Wafers by Nano-second Laser Irradiation
J. Yan, S. Muto, T. Kuriyagawa
Advanced Materials Research 76-78 451-456 2009.09
Research paper (scientific journal), Joint Work, Accepted
-
Effects of tool edge radius on ductile machining of silicon: an investigation by FEM
J. Yan, H. Zhao, and T. Kuriyagawa
Semiconductor Science and Technology 24 ( 7 ) 075018 (1-11) 2009.07
Research paper (scientific journal), Joint Work, Accepted
-
Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis
J. Yan, T. Zhou, J. Masuda, and T. Kuriyagawa
Precision Engineering 33 ( 2 ) 150-159 2009.06
Research paper (scientific journal), Joint Work, Accepted
-
Mechanism for material removal in diamond turning of reaction-bonded silicon carbide
J. Yan, Z. Zhang, and T. Kuriyagawa
International Journal of Machine Tools & Manufacture 49 ( 5 ) 366-374 2009.05
Research paper (scientific journal), Joint Work, Accepted
-
Microstructural and Topographical Changes of Ni-P Plated Molds in Glass Lens Pressing
J. Masuda, J. Yan, T. Tashiro, Y. Fukase, T. Zhou and T. Kuriyagawa
International Journal of Surface Science and Engineering 3 ( 1-2 ) 86-102 2009.03
Research paper (scientific journal), Joint Work, Accepted
-
Study on electrorheological fluid-assisted micro ultrasonic machining
T. Tateishi, N. Yoshihara, J. Yan, and T. Kuriyagawa
International Journal of Abrasive Technology 2 ( 1 ) 70-82 2009.03
Research paper (scientific journal), Joint Work, Accepted
-
Finite element modeling of high-pressure deformation and phase transformation of silicon beneath a sharp indenter
T. Kiriyama, H. Harada, and J. Yan
Semiconductor Science and Technology 24 ( 2 ) 025014 (1-12) 2009.02
Research paper (scientific journal), Joint Work, Accepted
-
Fabricating Nano Ribbons and Nano Fibers of Semiconductor Materials by Diamond Turning
J. Yan, X. Gai and T. Kuriyagawa
Journal of Nanoscience and Nanotechnology 9 ( 2 ) 1423-1427 2009.02
Research paper (scientific journal), Joint Work, Accepted
-
Shape transferability and microscopic deformation of molding dies in aspherical glass lens molding press
J. Yan, T. Zhou, N. Yoshihara, and T. Kuriyagawa
Journal of Manufacturing Technology Research 1 ( 1-2 ) 85-102 2009.02
Research paper (scientific journal), Joint Work, Accepted
-
Fabrication of micro end mills by wire EDM and some micro cutting tests
J. Yan, K. Uchida, N. Yoshihara, and T. Kuriyagawa
Journal of Micromechanics and Microengineering 19 ( 2 ) 025004 (1-9) 2009.02
Research paper (scientific journal), Joint Work, Accepted
-
Ultrasonic-assisted micro-grinding using electroplated diamond wheels
K. Shimada, T. Tateishi, N. Yoshihara, J. Yan, and T. Kuriyagawa
Journal of the Japan Society for Abrasive Technology 53 ( 1 ) 45-48 2009.01
Research paper (scientific journal), Joint Work, Accepted
-
Control of the behavior of abrasive grains by the effect of electrorheological fluid assistance - Study on electrorheological fluid-assisted micro ultrasonic machining
T. Tateishi, K. Shimada, N. Yoshihara, J. Yan, T. Kuriyagawa
Advanced Materials Research 69-70 148-152 2008.11
Research paper (scientific journal), Joint Work, Accepted
-
High-efficiency ultraprecision machining characteristics of single-crystal germanium
T. Ota, J. Yan, S. Kodera, S. Yajima, Y. Takahashi, N. Horikawa, and T. Kuriyagawa
Journal of the Japan Society for Abrasive Technology 52 ( 11 ) 651-656 2008.11
Research paper (scientific journal), Joint Work, Accepted
-
Surface and subsurface damages in nanoindentation tests of compound semiconductor InP
J. Yan, J. Tamaki, H. Zhao and T. Kuriyagawa
Journal of Micromechanics and Microengineering 18 ( 10 ) 105018 (1-10) 2008.10
Research paper (scientific journal), Joint Work, Accepted
-
Experimental Analysis of Elastic and Plastic Behavior in Ductile-Regime Machining of Glass Quartz Utilizing a Diamond Tool
J. Tamaki, A. Kubo and J. Yan
Key Engineering Materials 389-390 30-35 2008.09
Research paper (scientific journal), Joint Work, Accepted
-
Nondestructive measurement of the machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy
J. Yan, T. Asami, and T. Kuriyagawa
Precision Engineering 32 ( 3 ) 186-195 2008.09
Research paper (scientific journal), Joint Work, Accepted
-
Recovery of Subsurface Structures of Machining-Damaged Single Crystalline Silicon by Nd:YAG Laser Irradiation
J. Yan, T. Asami, T. Kuriyagawa
Key Engineering Materials 389-390 469-474 2008.09
Research paper (scientific journal), Joint Work, Accepted