Papers - Yan, Jiwang

Prediction of subsurface damage depth of ground brittle materials by surface profiling

T. Ohta, J. Yan, T. Kuriyagawa, S. Kodera, and T. Nakasuji

International Journal of Machining and Machinability of Materials 2 ( 1 ) 108-124 2007.01

Research paper (scientific journal), Joint Work, Accepted

Development of Laser Dresser for Resin Bonded Diamond Wheel

H. Matsuura, K. Hane, Y. Kunieda, N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   169-174 2006.09

Research paper (scientific journal), Joint Work, Accepted

Development of a Rubber-Bonded Grinding Wheel- Studies on Aspherical Grinding

N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   465-470 2006.09

Research paper (scientific journal), Joint Work, Accepted

Development of 3R Diamond Wheel by Thermoplastic Resin Bond

H. Matsuura, Y. Kunieda, N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   459-464 2006.09

Research paper (scientific journal), Joint Work, Accepted

Numerical Simulation and Prediction of Surface Heterogeneity in Diamond Turning of Single-Crystalline Germanium

J. Yan, Y. Fan, N. Yoshihara, T. Kuriyagawa

Key Engineering Materials 329   397-402 2006.09

Research paper (scientific journal), Joint Work, Accepted

High-Efficiency Mirror Grinding of AlN by Ultra-Precision Plane Horning

S. Suzuki, N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   291-296 2006.09

Research paper (scientific journal), Joint Work, Accepted

Development of a Resin-Coated Micro Polishing Tool by Plasma CVD Method - Electrorheological fluid-assisted polishing of Tungsten carbide micro aspherical molding dies

T. Kaku, N. Yoshihara, J. Yan, T. Kuriyagawa, K. Abiko, Y. Mikami and M. Noguchi

Key Engineering Materials 329   213-218 2006.09

Research paper (scientific journal), Joint Work, Accepted

Development of a New Laser Conditioning Method for Ultra-Fine Grit Diamond Wheels

Y. Kunieda, H. Matsuura, S. Kodama, N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   175-180 2006.09

Research paper (scientific journal), Joint Work, Accepted

Load effects on the phase transformation of single-crystal silicon during nanoindentation tests

J. Yan, H. Takahashi, X. Gai, H. Harada, J. Tamaki and T. Kuriyagawa

Materials Science and Engineering A 423 ( 1-2 ) 19-23 2006.02

Research paper (scientific journal), Joint Work, Accepted

Ultraprecision Machining Characteristics of Poly-crystalline Germanium

J. Yan, Y. Takahashi, J. Tamaki, A. Kubo, T. Kuriyagawa and Y. Sato

JSME International Journal, Series C 49 ( 1 ) 63-69 2006.01

Research paper (scientific journal), Joint Work, Accepted

Transmission electron microscopic observation of nanoindentations made on ductile-machined silicon wafers

J. Yan, H. Takahashi, J. Tamaki, X. Gai, and T. Kuriyagawa

Applied Physics Letters 87 ( 11 ) 211901 (1-3) 2005.11

Research paper (scientific journal), Joint Work, Accepted

Micro grooving on single-crystal germanium for infrared Fresnel lenses

J. Yan, K. Maekawa, J. Tamaki and T. Kuriyagawa

Journal of Micromechanics and Microengineering 15 ( 10 ) 1925-1931 2005.10

Research paper (scientific journal), Joint Work, Accepted

Effect of Cutting Edge Truncation on Ground Surface Morphology of Hard and Brittle Materials for Optical Devices

X. Kang, J. Tamaki, A. Kubo, J. Yan, and T. Iyama

Key Engineering Materials 291-292   139-144 2005.09

Research paper (scientific journal), Joint Work, Accepted

Effect of cutting edge shape of diamond abrasive grain on ductile mode grinding of optical glass -Measurement of critical depth of cut by means of single grit diamond cutting-

J. Tamaki, G. Sato, K. Maekawa, J. Yan, A. Kubo

Journal of the Japan Society of Grinding Engineers 49 ( 6 ) 335-340 2005.06

Research paper (scientific journal), Joint Work, Accepted

Nanoindentation tests on diamond-machined silicon wafers

J. Yan, H. Takahashi, J. Tamaki, X. Gai, H. Harada, and J. Patten

Applied Physics Letters 85 ( 5 ) 181913 (1-3) 2005.05

Research paper (scientific journal), Joint Work, Accepted

Fabrication of large-curvature optical elements by ultraprecision cutting under 3-axis numerical control

J. Yan, T. Sasaki, J. Tamaki, A. Kubo

Journal of the Japan Society for Abrasive Technology 49 ( 4 ) 205-208 2005.04

Research paper (scientific journal), Joint Work, Accepted

Single-Point Diamond Turning of CaF2 for Nanometric Surface

J. Yan, J. Tamaki, K. Syoji, and T. Kuriyagawa

International Journal of Advanced Manufacturing Technology 24 ( 9-10 ) 640-646 2004.09

Research paper (scientific journal), Joint Work, Accepted

Laser micro-Raman spectroscopy of single-point diamond machined silicon substrates

J. Yan

Journal of Applied Physics 95 ( 4 ) 2094-2101 2004.04

Research paper (scientific journal), Single Work, Accepted

Experimental Study on the Ultraprecision Ductile Machinability of Single-Crystal Germanium

J. Yan, K. Maekawa, J. Tamaki and A. Kubo

JSME International Journal, Series C 47 ( 1 ) 29-36 2004.01

Research paper (scientific journal), Joint Work, Accepted

Crystallographic effects in micro/nanomachining of single-crystal calcium fluoride

J. Yan, K. Syoji and J. Tamaki

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 22 ( 1 ) 46-51 2004.01

Research paper (scientific journal), Joint Work, Accepted