Papers - Yan, Jiwang

Ultraprecision cutting of photoresist/gold composite microstructures

J. Yan

CIRP Annals – Manufacturing Technology 60 ( 1 ) 133-136 2011.08

Research paper (scientific journal), Single Work, Accepted

Thermal Analysis of Laser Irradiation of Fused Silica

P. Yao, Y. Gong, S. Yuan, T. Zhou, J. Yan, T. Kuriyagawa

Advanced Materials Research 314-316   1960-1964 2011.08

Research paper (scientific journal), Joint Work, Accepted

On-Machine Measurement and Statistical Analysis of Wheel Wear After Grinding of Optical Glass

P. Yao, T. Matsuda, T. Zhou, J. Yan, T. Kuriyagawa, Y. Gong

Advanced Materials Research 325   653-658 2011.08

Research paper (scientific journal), Joint Work, Accepted

Investigation on Shape Transferability in Ultraprecision Glass Molding Press for Microgrooves

T. Zhou, J. Yan, J. Masuda, T. Oowada, and T. Kuriyagawa

Precision Engineering 35 ( 2 ) 214-220 2011.06

Research paper (scientific journal), Joint Work, Accepted

Characterization of microparticles and oxide layers generated by laser irradiation of diamond-machined silicon wafers

J. Yan, S. Sakai, H. Isogai, and K. Izunome

Semiconductor Science and Technology 26 ( 2 ) 025006 (1-7) 2011.02

Research paper (scientific journal), Joint Work, Accepted

Thermally-induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press

J. Masuda, J. Yan, T. Zhou, T. Kuriyagawa, and Y. Fukase

Journal of Physics D: Applied Physics 44 ( 21 ) 215302 (1-12) 2011.02

Research paper (scientific journal), Joint Work, Accepted

Subsurface damage of single crystalline silicon carbide in nanoindentation tests

J. Yan, X. Gai and H. Harada

Journal of Nanoscience and Nanotechnology 10 ( 11 ) 7808-7811 2010.11

Research paper (scientific journal), Joint Work, Accepted

Tool-Swinging Cutting of Binderless Tungsten Carbide

Z. Zhang, J. Yan, T. Kuriyagawa

Advanced Materials Research 139-141   727-730 2010.10

Research paper (scientific journal), Joint Work, Accepted

Fabricating micro grooves with varied cross-sections by electro discharge machining

J. Yan, T. Kaneko, K. Uchida, N. Yoshihara, T. Kuriyagawa

International Journal of Advanced Manufacturing Technology 50 ( 9-12 ) 991-1002 2010.10

Research paper (scientific journal), Joint Work, Accepted

Development of a high-frequency pulse laser irradiation system for repairing silicon wafers damaged by abrasive machining processes

J. Yan, S. Muto, and T. Kuriyagawa

International Journal of Abrasive Technology 3 ( 3 ) 175-189 2010.09

Research paper (scientific journal), Joint Work, Accepted

Fabricating micro-structured surface by using single-crystalline diamond endmill

J. Yan, Z. Zhang, and T. Kuriyagawa

International Journal of Advanced Manufacturing Technology 51 ( 9 ) 957-964 2010.09

Research paper (scientific journal), Joint Work, Accepted

Ductile and Brittle Mode Grinding of Fused Silica

P. Yao, N. Yoshihara, N. Hitomi, J. Yan, T. Kuriyagawa

Key Engineering Materials 447-448   21-25 2010.08

Research paper (scientific journal), Joint Work, Accepted

Tool wear control in diamond turning of high-strength mold materials by means of tool swinging

J. Yan, Z. Zhang, T. Kuriyagawa

CIRP Annals – Manufacturing Technology 59 ( 1 ) 109-112 2010.08

Research paper (scientific journal), Joint Work, Accepted

Repairing Damage on Ground Fused Silica by CO₂ Laser Irradiation

P. Yao, T. Abe, N. Yoshihara, T. Zhou, J. Yan, T. Kuriyagawa

Advanced Materials Research 126-128   401-406 2010.08

Research paper (scientific journal), Joint Work, Accepted

Laser Assist Powder Jet Deposition

N. Yoshihara, R. Hiromatsu, K. Mizutani, J. Yan, T. Kuriyagawa

Advanced Materials Research 126-128   58-63 2010.08

Research paper (scientific journal), Joint Work, Accepted

Comparing Microgroove Array Forming with Micropyramid Array Forming in the Glass Molding Press

T. Zhou, J. Yan, T. Kuriyagawa

Key Engineering Materials 447-448   361-365 2010.08

Research paper (scientific journal), Joint Work, Accepted

Effect of Grain Cutting Direction for Ground Surface Roughness: Study on Nonaxisymmetric Aspherical Grinding

N. Yoshihara, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Precision Engineering 76 ( 7 ) 781-785 2010.07

Research paper (scientific journal), Joint Work, Accepted

Restoration of the retention force of a small-diameter thermoplastic resin-bonded wheel by laser treatment

H. Matsuura, Y. Kunieda, N. Yoshihara, M. Tanabe, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 54 ( 5 ) 282-287 2010.05

Research paper (scientific journal), Joint Work, Accepted

Study on Nonisothermal Glass Molding Press for Aspherical Lens

T. Zhou, J. Yan, N. Yoshihara, and T. Kuriyagawa

Journal of Advanced Mechanical Design, Systems, and Manufacturing 4 ( 5 ) 804-815 2010.05

Research paper (scientific journal), Joint Work, Accepted

Deformation in mono-crystalline silicon caused by high speed single-point micro-cutting

A. Q. Biddut, J. Yan, L. C. Zhang, T. Ohta, B. Shaun, T. Kuriyagawa

Key Engineering Materials 407-408   347-350 2010.04

Research paper (scientific journal), Joint Work, Accepted