Papers - Yan, Jiwang

Ultraprecision cutting of fluoride glass - Fundamental investigation on surface formation and tool damage -

J. Ishizuka, K. Nagasawa, M. Mikami, J. Yan

Journal of the Japan Society for Abrasive Technology 62 ( 2 ) 88 - 93 2018.02

Research paper (scientific journal), Joint Work, Accepted

Precision slicing of single-crystal SiC using extremely fine fixed-abrasive diamond wire

T. Suzuki, T. Otsuki, J. Yan

Transactions of the JSME 84 ( 857 ) 1 - 18 2018.01

Research paper (scientific journal), Joint Work, Accepted

Comparative study of phase transformation in single-crystal germanium during single and cyclic nanoindentation

K. Kosai, H. Huang, J. Yan

Crystals 7 ( 333 ) 1 - 11 2017.11

Research paper (scientific journal), Joint Work, Accepted

Fabrication of hexagonal microlens arrays on single-crystal silicon by tool-servo segment turning method

M. Mukaida, J. Yan

Micromachines 8 ( 323 ) 1 - 18 2017.11

Research paper (scientific journal), Joint Work, Accepted

An investigation on the crack resistance of CrN, CrBN and CrTiBN coatings via nanoindentation

Q. Wang, F. Zhou, Z. Zhou, L. K-Y Li, J. Yan

Vacuum 145   186 - 193 2017.10

Research paper (scientific journal), Joint Work, Accepted

Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon

T. Suzuki, Y. Nishino, J. Yan

Precision Engineering 50   32 - 43 2017.09

Research paper (scientific journal), Joint Work, Accepted

Effect of surfactants and additives on electrical discharge machining of Reaction Bonded Silicon Carbide

M. R. A. Razak, P. J. Liew, N. I. S. Hussein, Q. Ahsan, J. Yan

ARPN Journal of Engineering and Applied Sciences 12 ( 14 ) 4334 - 4339 2017.09

Research paper (scientific journal), Joint Work, Accepted

Investigating shear band interaction in metallic glasses by adjacent nanoindentation

H. Huang, J. Yan

Materials Science & Engineering A 704   375 - 385 2017.08

Research paper (scientific journal), Joint Work, Accepted

Fabrication of Microstructures on Single-crystal Diamond by Press Imprinting Utilizing Pure Iron Molds

Y. Imoto, J. Yan

Journal of the Japan Society for Precision Engineering 83 ( 8 ) 770 - 774 2017.08

Research paper (scientific journal), Joint Work, Accepted

Laser Irradiation Responses of a Single-Crystal Diamond Produced by Different Crystal Growth Methods

N. Takayama, J. Yan

Applied Sciences 7 ( 815 ) 1 - 15 2017.08

Research paper (scientific journal), Joint Work, Accepted

A nanosecond time-resolved XFEL analysis of structural changes associated with CO release from cytochrome c oxidase

A. Shimada, M. Kubo, S. Baba, K. Yamashita, K. Hirata, G. Ueno, T. Nomura, T. Kimura, K. Shinzawa-Itoh, J. Baba, K. Hatano, Y. Eto, A. Miyamoto, H. Murakami, T. Kumasaka, S. Owada, K. Tono, M. Yabashi, Y. Yamaguchi, S. Yanagisawa, M. Sakaguchi, T. Ogura, R. Komiya, J. Yan, E. Yamashita, M. Yamamoto, H. Ago, S. Yoshikawa, T. Tsukihara

Science Advances 3 ( e1603042 ) 1 - 12 2017.07

Research paper (scientific journal), Joint Work, Accepted

Ultraprecision surface flattening of porous silicon by diamond turning

M. Heidari, J. Yan

Precision Engineering 49   262 - 277 2017.07

Research paper (scientific journal), Joint Work, Accepted

Fabrication of single-crystal silicon micro pillars on copper foils by nanosecond pulsed laser irradiation

J. Yan, J. Noguchi, Y. Terashi

CIRP Annals – Manufacturing Technology 66 ( 1 ) 253 - 256 2017.07

Research paper (scientific journal), Joint Work, Accepted

On the phase transformation of single-crystal 4H-SiC during nanoindentation

M. Matsumoto, H. Huang, H. Harada, K. Kakimoto,　J. Yan

Journal of Physics D: Applied Physics 50 ( 265303 ) 1 - 9 2017.06

Research paper (scientific journal), Joint Work, Accepted

Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas

H. Hu, J. Yan

Journal of Micromechanics and Microengineering 27 ( 075007 ) 1 - 13 2017.06

Research paper (scientific journal), Joint Work, Accepted

Thermochemical Micro Imprinting of Single-crystal Diamond Surface Using a Nickel Mold under High-Pressure Conditions

Y. Imoto, J. Yan

Applied Surface Science 404   318 - 325 2017.05

Research paper (scientific journal), Joint Work, Accepted

Mechanisms of micro-groove formation on single-crystal diamond by a nanosecond pulsed laser

N. Takayama, J. Yan

Journal of Materials Processing Technology 243   299 - 311 2017.05

Research paper (scientific journal), Joint Work, Accepted

Study on the crack resistance of CrBN composite coatings via nano-indentation and scratch tests

Q. Wang, F. Zhou, M. Callisti, T. Polcar, J. Kong, J. Yan

Journal of Alloys and Compounds 708   1103 - 1109 2017.03

Research paper (scientific journal), Joint Work, Accepted

Fundamental characteristics of material removal and surface formation in diamond turning of porous carbon

M. Heidari, J. Yan

International Journal of Additive and Subtractive Materials Manufacturing 1 ( 1 ) 23 - 41 2017.03

Research paper (scientific journal), Joint Work, Accepted

Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo

M. Mukaida, J. Yan

International Journal of Machine Tools and Manufacture 115   2 - 14 2017.02

Research paper (scientific journal), Joint Work, Accepted