Papers - Yan, Jiwang

Development of a Resin-Coated Micro Polishing Tool by Plasma CVD Method - Electrorheological fluid-assisted polishing of Tungsten carbide micro aspherical molding dies

T. Kaku, N. Yoshihara, J. Yan, T. Kuriyagawa, K. Abiko, Y. Mikami and M. Noguchi

Key Engineering Materials 329   213-218 2006.09

Research paper (scientific journal), Joint Work, Accepted

Development of a New Laser Conditioning Method for Ultra-Fine Grit Diamond Wheels

Y. Kunieda, H. Matsuura, S. Kodama, N. Yoshihara, J. Yan, T. Kuriyagawa

Key Engineering Materials 329   175-180 2006.09

Research paper (scientific journal), Joint Work, Accepted

Load effects on the phase transformation of single-crystal silicon during nanoindentation tests

J. Yan, H. Takahashi, X. Gai, H. Harada, J. Tamaki and T. Kuriyagawa

Materials Science and Engineering A 423 ( 1-2 ) 19-23 2006.02

Research paper (scientific journal), Joint Work, Accepted

Ultraprecision Machining Characteristics of Poly-crystalline Germanium

J. Yan, Y. Takahashi, J. Tamaki, A. Kubo, T. Kuriyagawa and Y. Sato

JSME International Journal, Series C 49 ( 1 ) 63-69 2006.01

Research paper (scientific journal), Joint Work, Accepted

Transmission electron microscopic observation of nanoindentations made on ductile-machined silicon wafers

J. Yan, H. Takahashi, J. Tamaki, X. Gai, and T. Kuriyagawa

Applied Physics Letters 87 ( 11 ) 211901 (1-3) 2005.11

Research paper (scientific journal), Joint Work, Accepted

Micro grooving on single-crystal germanium for infrared Fresnel lenses

J. Yan, K. Maekawa, J. Tamaki and T. Kuriyagawa

Journal of Micromechanics and Microengineering 15 ( 10 ) 1925-1931 2005.10

Research paper (scientific journal), Joint Work, Accepted

Effect of Cutting Edge Truncation on Ground Surface Morphology of Hard and Brittle Materials for Optical Devices

X. Kang, J. Tamaki, A. Kubo, J. Yan, and T. Iyama

Key Engineering Materials 291-292   139-144 2005.09

Research paper (scientific journal), Joint Work, Accepted

Effect of cutting edge shape of diamond abrasive grain on ductile mode grinding of optical glass -Measurement of critical depth of cut by means of single grit diamond cutting-

J. Tamaki, G. Sato, K. Maekawa, J. Yan, A. Kubo

Journal of the Japan Society of Grinding Engineers 49 ( 6 ) 335-340 2005.06

Research paper (scientific journal), Joint Work, Accepted

Nanoindentation tests on diamond-machined silicon wafers

J. Yan, H. Takahashi, J. Tamaki, X. Gai, H. Harada, and J. Patten

Applied Physics Letters 85 ( 5 ) 181913 (1-3) 2005.05

Research paper (scientific journal), Joint Work, Accepted

Fabrication of large-curvature optical elements by ultraprecision cutting under 3-axis numerical control

J. Yan, T. Sasaki, J. Tamaki, A. Kubo

Journal of the Japan Society for Abrasive Technology 49 ( 4 ) 205-208 2005.04

Research paper (scientific journal), Joint Work, Accepted

Single-Point Diamond Turning of CaF2 for Nanometric Surface

J. Yan, J. Tamaki, K. Syoji, and T. Kuriyagawa

International Journal of Advanced Manufacturing Technology 24 ( 9-10 ) 640-646 2004.09

Research paper (scientific journal), Joint Work, Accepted

Laser micro-Raman spectroscopy of single-point diamond machined silicon substrates

J. Yan

Journal of Applied Physics 95 ( 4 ) 2094-2101 2004.04

Research paper (scientific journal), Single Work, Accepted

Experimental Study on the Ultraprecision Ductile Machinability of Single-Crystal Germanium

J. Yan, K. Maekawa, J. Tamaki and A. Kubo

JSME International Journal, Series C 47 ( 1 ) 29-36 2004.01

Research paper (scientific journal), Joint Work, Accepted

Crystallographic effects in micro/nanomachining of single-crystal calcium fluoride

J. Yan, K. Syoji and J. Tamaki

Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 22 ( 1 ) 46-51 2004.01

Research paper (scientific journal), Joint Work, Accepted

Improvement of the Crystal Orientation and Surface Roughness of Ru Thin Films by Introducing Oxygen during Sputtering

Y. Abe, S. Shinkai, K. Sasaki, J. Yan, and K. Maekawa

Japanese Journal of Applied Physics 43 ( 1 ) 277-280 2004.01

Research paper (scientific journal), Joint Work, Accepted

Ductile Regime Machining of Single-Crystal CaF2 for Aspherical Lenses

J. Yan, J. Tamaki, K. Syoji, T. Kuriyagawa

Key Engineering Materials 257-258   95-100 2003.11

Research paper (scientific journal), Joint Work, Accepted

Effect of Cutting-Edge Shape on Ductile Regime Grinding of Optical Glass in Single-Grit Diamond Grinding

J. Tamaki, T. Mahmoud, J. Yan, G. Sato, T. Iyama

Key Engineering Materials 257-258   89-94 2003.11

Research paper (scientific journal), Joint Work, Accepted

Chip Formation Behaviour in Ultra-Precision Cutting of Electroless Nickel Plated Mold Substrates

J. Yan, T. Sasaki, J. Tamaki, A. Kubo, T. Sugino

Key Engineering Materials 257-258   3-8 2003.11

Research paper (scientific journal), Joint Work, Accepted

Measurement of three-dimensional shape of diamond abrasive grain utilizing a scanning laser microscope

T. Mahamoud, J. Tamaki, J. Yan, S. Suzuki

Journal of the Japan Society for Abrasive Technology 47 ( 6 ) 314-319 2003.06

Research paper (scientific journal), Joint Work, Accepted

Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon

J. Yan, K. Syoji and J. Tamaki

Wear 255 ( 712 ) 1380-1387 2003.06

Research paper (scientific journal), Joint Work, Accepted