Papers - Yan, Jiwang

Volumetric and timescale analysis of phase transformation in single-crystal silicon during nanoindentation

H. Huang, J. Yan

Applied Physics A 122 ( 607 ) 1 - 11 2016.05

Research paper (scientific journal), Joint Work, Accepted

In situ characterization of formation and growth of high-pressure phases in single-crystal silicon during nanoindentation

H. Huang, J. Yan

Applied Physics A 122 ( 409 ) 1 - 7 2016.03

Research paper (scientific journal), Joint Work, Accepted

Precision slicing of single-crystal silicon using a dicing wire saw

T. Suzuki, T. Otsuki, J. Yan

Journal of the Japan Society for Abrasive Technology 60 ( 2 ) 97-103 2016.02

Research paper (scientific journal), Joint Work, Accepted

Microstructure, mechanical and tribological properties of CrSiC coatings sliding against SiC and Al₂O₃ balls in water

Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li

Applied Surface Science 368   129 - 139 2016.02

Research paper (scientific journal), Joint Work, Accepted

Friction and wear properties of CrSiCN coatings with low carbon content as sliding against SiC and steel balls in water

Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li

Tribology International 94   176 - 186 2016.01

Research paper (scientific journal), Joint Work, Accepted

Press Molding of a Si-HDPE Hybrid Lens Substrate and Evaluation of Its Infrared Optical Properties

A. R. Abdul Manaf, J. Yan

Precision Engineering 43   429 - 438 2016.01

Research paper (scientific journal), Joint Work, Accepted

Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests

Q. Wang, F. Zhou, J. Yan

Surface and Coatings Technology 285   203 - 213 2016.01

Research paper (scientific journal), Joint Work, Accepted

High-precision drilling of CFRP by ultrasonic vibration-assisted grinding

T. Yamazaki, J. Yan

Journal of the Japan Society for Abrasive Technology 59 ( 12 ) 699-704 2015.12

Research paper (scientific journal), Joint Work, Accepted

Possibility for rapid generation of high-pressure phases in single-crystal silicon by fast nanoindentation

H. Huang, J. Yan

Semiconductor Science and Technology 30 ( 115001 )  2015.11

Research paper (scientific journal), Joint Work, Accepted

On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining

H. Huang, J. Yan

Applied Surface Science 355   1306 - 1315 2015.11

Research paper (scientific journal), Joint Work, Accepted

Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves

K. Asakura, J. Yan

International Journal of Automation Technology 9   396 - 402 2015.11

Research paper (scientific journal), Joint Work, Accepted

Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication

Z. Wu, F. Zhou, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li

Applied Surface Science 355   516 - 530 2015.10

Research paper (scientific journal), Joint Work, Accepted

Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation

Q. Wang, Z. Wu, F. Zhou, J. Yan

Materials Science and Engineering: A 642   391 - 397 2015.10

Research paper (scientific journal), Joint Work, Accepted

Study on Mechanical Properties of Single-Crystal Silicon Carbide by Nanoindentation

M. Matsumoto, H. Harada, K. Kakimoto, J. Yan

Advanced Materials Research 1136   549 - 554 2015.09

Research paper (scientific journal), Joint Work, Accepted

On the mechanism of secondary pop-out in cyclic nanoindentation of single-crystal silicon

H. Huang, J. Yan

Journal of Materials Research 30 ( 11 ) 1861 - 1868 2015.06

Research paper (scientific journal), Joint Work, Accepted

Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC

J. Yan, T. H. Tan

CIRP Annals – Manufacturing Technology 64 ( 1 ) 221 - 224 2015.05

Research paper (scientific journal), Joint Work, Accepted

Anisotropy of synthetic diamond in catalytic etching using iron powder

J. Wang, L. Wan, J. Chen, J. Yan

Applied Surface Science 346   388 - 393 2015.05

Research paper (scientific journal), Joint Work, Accepted

Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation

Q. Wang, Z. Wu, F. Zhou, H. Huang, K. Niitsu, J. Yan

Surface and Coatings Technology 272   239 - 245 2015.04

Research paper (scientific journal), Joint Work, Accepted

Comparison of tribological and electrochemical properties of TiN, CrN, TiAlN and a-C:H coatings in simulated body fluid

Q. Wang, F. Zhou, C. Wang, M. F. Yuen, M. Wang, T. Qian, M. Matsumoto, J. Yan

Materials Chemistry and Physics 156   74 - 81 2015.04

Research paper (scientific journal), Joint Work, Accepted

New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation

H. Huang, J. Yan

Scripta Materialia 102   35 - 38 2015.03

Research paper (scientific journal), Joint Work, Accepted