Papers - Yan, Jiwang

Investigation of particle impact phenomena in powder jet deposition process

C. Nishikawa, K. Mizutani, T. Zhou, J. Yan, T. Kuriyagawa

Key Engineering Materials 523-524   184-189 2012.11

Research paper (scientific journal), Joint Work, Accepted

Statistical approach for calculating ground surface roughness of ultrasonic-assisted grinding

K. Shimada, T. Zhou, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 56 ( 11 ) 752-757 2012.11

Research paper (scientific journal), Joint Work, Accepted

Statistical approach optimizing slant feed grinding

K. Shimada, P. J. Liew, T. Zhou, J. Yan, and T. Kuriyagawa

Journal of Advanced Mechanical Design, Systems, and Manufacturing 6 ( 6 ) 898-907 2012.11

Research paper (scientific journal), Joint Work, Accepted

Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC

P. J. Liew, J. Yan, T. Masaki, T. Kuriyagawa

Advanced Materials Research 565   529-534 2012.09

Research paper (scientific journal), Joint Work, Accepted

Crystallographic effect on subsurface damage formation in silicon microcutting

J. Yan, T. Asami, H. Harada, T. Kuriyagawa

CIRP Annals – Manufacturing Technology 61 ( 1 ) 131-134 2012.08

Research paper (scientific journal), Joint Work, Accepted

Fabrication of polycrystalline diamond tools by micro electrodischarge machining

Z. Zhang, H. Peng, J. Yan, T. Kuriyagawa

Advanced Materials Research 497   225-229 2012.04

Research paper (scientific journal), Joint Work, Accepted

Size effects on transferability and mold change of glass molding press for microgrooves

T. Zhou, J. Yan, T. Kuriyagawa

Advanced Materials Research 497   235-239 2012.04

Research paper (scientific journal), Joint Work, Accepted

Investigation of wheel wear mechanism during grinding optical glasses through statistical analysis of wheel topography

P. Yao, Y. Gong, T. Matsuda, T. Zhou, J. Yan, and T. Kuriyagawa

International Journal of Abrasive Technology 5 ( 1 ) 33-47 2012.03

Research paper (scientific journal), Joint Work, Accepted

Study on the mechanism of power jet machining

C. Nishikawa, K. Mizutani, T. Zhou, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 56 ( 3 ) 179-183 2012.03

Research paper (scientific journal), Joint Work, Accepted

Material removal mechanism of ultrasonic machining

T. Katahira, K. Shimada, T. Zhou, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 56 ( 2 ) 108-111 2012.02

Research paper (scientific journal), Joint Work, Accepted

High Efficiency Precision Surface Grinding of Fused Silica

P. Yao, Y. Gong, S. Yuan, N. Yoshihara, J. Yan, T. Kuriyagawa

Advanced Materials Research 418-420   1132-1136 2012.01

Research paper (scientific journal), Joint Work, Accepted

Manufacturing Structured Surface by Combining Microindentation and Ultraprecision Cutting

J. Yan, A. Horikoshi, T. Kuriyagawa, and Y. Fukushima

CIRP Journal of Manufacturing Science and Technology 5 ( 1 ) 652-655 2012.01

Research paper (scientific journal), Joint Work, Accepted

Development of uniformly dispersed and well-classified diamond abrasive wheel for nano-precision grinding

K. Matsumoto, T. Zhou, J. Yan, H. Matsuura, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 55 ( 11 ) 652-655 2011.11

Research paper (scientific journal), Joint Work, Accepted

Laser-assisted powder jet deposition

N. Yoshihara, R. Hiromatsu, K. Mizutani, J. Yan, and T. Kuriyagawa

Journal of the Japan Society for Abrasive Technology 55 ( 10 ) 606-610 2011.10

Research paper (scientific journal), Joint Work, Accepted

Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC

J. Yan, Z. Zhang, and T. Kuriyagawa

International Journal of Automation Technology 5 ( 3 ) 307-312 2011.10

Research paper (scientific journal), Joint Work, Accepted

Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L

K. Shimada, N. Yoshihara, J. Yan, T. Kuriyagawa, Y. Sueishi, and H. Tezuka

International Journal of Automation Technology 5 ( 3 ) 427-432 2011.10

Research paper (scientific journal), Joint Work, Accepted

Statistical Approach Calculating Ground Surface Roughness of Ultrasonic-assisted Micro-grinding

K. Shimada, T. Zhou, J. Yan, T. Kuriyagawa

Advanced Materials Research 325   600-605 2011.09

Research paper (scientific journal), Joint Work, Accepted

Experimental research on a modular miniaturization nanoindentation device

H. Huang, H. Zhao, J. Mi, J. Yang, S. Wan, Z, Yang, J. Yan, Z. Ma, C. Geng

Review of Scientific Instruments 82 ( 9 ) 095101 (1-6) 2011.09

Research paper (scientific journal), Joint Work, Accepted

Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide

Z. Zhang, J. Yan, and T. Kuriyagawa

International Journal of Advanced Manufacturing Technology 57 ( 1 ) 117-125 2011.09

Research paper (scientific journal), Joint Work, Accepted

Ultraprecision Mass Fabrication of Aspherical Fresnel Lens by Glass Molding Press

T. Zhou, J. Yan, J. Masuda, T. Kuriyagawa

Advanced Materials Research 325   713-718 2011.08

Research paper (scientific journal), Joint Work, Accepted