Papers - Aoyama, Hideki
-
Basic study on process planning for Turning-Milling Center based on machining feature recognition
Khusna DWIJAYANTI, Hideki AOYAMA
Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.8 ( No.4 ) pp.1 - 11 2014.10
Research paper (scientific journal), Accepted
-
Curved Surfaces Forming of Sheet Material by Laser Irradiation
Keisuke Kishida, Hideki Aoyama, Naohisa Mastushita, Akihiko Ushimaru
Advances in Abrasive Technology ⅩⅦ pp.788 - 793 2014.09
Research paper (international conference proceedings), Joint Work, Accepted
-
The Modular Design in Consideration of Influence of Noise
Saimon GOKYU, Hideki AOYAMA, and Toshiharu MIWA
Proceedings of The 3rd International Conference on Design Engineering and Science (ICDES2014) pp.150 - 155 2014.08
Research paper (international conference proceedings), Joint Work, Accepted
-
ROBUST DESIGN ON KANSEI OF PRODUCT SATISFYING EMOTION AND PREFERENCE OF TARGET CUSTOMERS USING TAGUCHI METHOD
Hideki Aoyama,Yuka Kawamura,Tetsuo Oya
Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014) pp.1 - 7 2014.08
Research paper (international conference proceedings), Joint Work, Accepted
-
FABRIC SIMULATION USING MEASUREMENT DATA FOR DRESS DESIGN
Ayumi Hara,Hideki Aoyama,Tetsuo Oya
Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014) pp.1 - 8 2014.08
Research paper (international conference proceedings), Joint Work, Accepted
-
Fabric model for clothing design by wrinkle simulation
Ayumi Hara,Hideki Aoyama
Jounal of Mechanical Science and Technorogy 28 (Springer) Vol.28 pp.2453 - 2458 2014.07
Research paper (scientific journal), Joint Work, Accepted
-
GAIN OPTIMIZATION FOR HIGH SPEED AND HIGH ACCURACY CONTROL OF MACHINE TOOL
Duo Zhang,Hideki Aoyama
Proceedings of ISCIE / ASME ISFA2014 International Symposium on Flexible Automation pp.1 - 6 2014.07
Research paper (international conference proceedings), Joint Work, Accepted
-
DESIGN SUPPORT SYSTEM USING MASS-SPRING SIMULATION FOR VEHICLE CRASHWORTHINES
Akihiro Nakaishi,Tetsuo Oya,Hideki Aoyama
Proceedings of ISCIE / ASME ISFA2014 International Symposium on Flexible Automation pp.1 - 3 2014.07
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of Process Planning System for Turning-Milling Center
Khusna Dwijayanti,Hideki Aoyama
Proceedings of 14th International Conference on Precision Engineering(ICPE2014) pp.548 - 553 2014.07
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of System to Predictand Minimize of Burrs in End-Milling
SotheaKruy,HidekiAoyama,Noriaki Sano
Proceedings of 14th International Conference on Precision Engineering(ICPE2014) pp.518 - 523 2014.07
Research paper (international conference proceedings), Joint Work, Accepted
-
意匠デザインにおける高品質形状のための曲率単調曲線生成手法
木村文彦、大家哲朗、青山英樹
精密工学会誌 (精密工学会) Vol.80 ( No.6 ) pp.598 - 603 2014.06
Research paper (scientific journal), Joint Work, Accepted
-
A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with consideration of the interactions of attributes
Huu-Tho Nguyen, Siti Zawiah Md Dawal, Yusoff Nukman, Hideki Aoyama
Expert Systems with Applications Vol.41 pp.3078 - 3090 2014.05
Research paper (scientific journal), Joint Work, Accepted
-
デジタルスタイルデザインに関する研究 －要求に印象を呈する木目模様の生成法－
秋山 涼、青山英樹、大家哲朗
精密工学会誌 (精密工学会) Vol.80 ( No.5 ) pp.484 - 490 2014.05
Research paper (scientific journal), Joint Work, Accepted
-
Insert geometry effects on surface roughness in turning process of AISI D2 steel
Zahari TAHA, Hani-kurniati LELANA, Hideki AOYAMA, Raja Ariffin RAJA GHAZILLA, Julirose GONZALES, Novita SAKUNDARINI, Sugoro B. SUTONO
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) pp.966 - 971 2014
Research paper (scientific journal), Joint Work, ISSN 1862-1775
-
Investigation on Musculoskeletal Symptoms and Ergonomic Risk Factors at Metal Stamping Industry
Mean Vathna, Nor Suliani Abdullah, Siti Zawiah Md Dawal, Hideki Aoyama and Kruy Sothea
ADVANCED ENGINEERING FORUM pp.293 - 299 2013.12
Research paper (scientific journal), Joint Work, Accepted, ISSN 2234-991X
-
Burr Prediction Method in End Milling
Sotea KRUY, Hideki AOYAMA, Kentaro OHTA, Noriaki SANO
Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) 2013.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Basic Study on Process Planning for Turning-Milling Center Based on Machining Feature Recognition
Kusna Dwijayanti, Hideki Aoyama
Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) 2013.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Laser Forming Method for Curved Surfaces - Analysis and Experiment -
Keisuke Kishida, Hideki Aoyama, Naohisa Matsushita,Akihiko Ushimaru
Proceedings of 5th International Conference of Aisn Society for Precision Engineering and Nanotechnology(ASPEN2013) pp.1-6 2013.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Generation of NC Program for Realizing High Speed Feed Rate and High Quality machining
Shintaro Sakurai, Hideki Aoyama, Noriaki Sano
Proceedings of 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013) pp.1-6 2013.11
Research paper (international conference proceedings), Joint Work, Accepted
-
PRODUCTIVITY IMPROVEMENT BY USING JUST IN TIME – LINE BALANCING TECHNIQUE
Piseth Seng, Nukman Bin Yusoff, Sovanna Pan, Aoyama Hideki
Proceedings of AUN/SEED-NetRegional Conference on Mechanical and Manufacturing Engineering (AUN/SEED-NET) pp.51- - 57 2013.11
Research paper (international conference proceedings), Joint Work, Accepted