Papers - Aoyama, Hideki
-
Basic System for Process Planning and NC Program Generation to Use Turning-Milling Machine Tool with Multi-Turrets
Ririko KIYOOKA, Khusna DWIJAYANTI, and Hideki AOYAMA
Proceedings of the 19th International Symposium on Advances in Abrasive Technology (ISAAT2016) pp.295 - 299(USB) 2016.10
Research paper (international conference proceedings), Joint Work, Accepted
-
BURR PREDICTION DUE TO FLANK WEAR IN END-MILLING
Sothea Kruy, Hideki Aoyama
Proceedings of International Symposium on Flexible Automation 2016(ISFA2016) pp.412 - 417 2016.08
Joint Work, Accepted
-
Accurate Estimation of Cutting Time Based on Control Principle of Machine Tool
Kosuke Saito, Hideki Aoyama and Noriaki Sano
International Journal of Automation Technology (Fuji Technology Press Ltd.) Vol.10 ( No. 3 ) pp.429 - 437 2016.03
Research paper (scientific journal), Joint Work, Accepted
-
A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools
Yoshinori Ogawa, Kazuo Nakamoto, Michiharu Ota, Tomohiro Fukaya, Marc Russell, Tarek I. Zohdi, Kazuo Yamazaki, Hideki Aoyama
CIRP Annals - Manufacturing Technology (ELSEVIER) Vol.65 pp.245 - 248 2016
Research paper (scientific journal), Joint Work, Accepted
-
Basic Development of Dental CAD System Based on occlusion
Masahiro Itoh, Hideki Aoyama
Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 8 2015.11
Research paper (international conference proceedings), Accepted
-
Basic Method for Simultaneous Measurement of Enamel and Dentin Shapes of Human Teeth
Terumi Hayashi, Hideki Aoyama
Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 8 2015.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of Digital Design System for Pottery Crack Patterns
Kaoru Shimizu, Hideki Aoyama
Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 11 2015.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Construction Method of High-quality Aesthetic Surfaces Based on Fairing Highlight Lines
Tatsuhiro Hokaike, Hideki Aoyama
Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 11 2015.11
Research paper (international conference proceedings), Joint Work, Accepted
-
A Method for Identification of Control Parameters of NC Machine Tool and its Utilization for High-Speed Machining and Accurate Machining Time Estimation
Yuki Yamamoto, Hideki Aoyama, Noriaki Sano
Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 6 2015.10
Research paper (international conference proceedings), Joint Work, Accepted
-
High Efficiency Machining of Curved Surfaces Using 5 Axis Machine Tool
Satoshi YAMAGATA, Hideki AOYAMA, Noriaki SANO
Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 6 2015.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Machining without Precision Arrangement of Workpiece by Automatic Recognition of Position and Attitude
Sheng-Han Hsieh, Hideki Aoyama
Proceedings of The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015) pp.1 - 7 2015.08
Research paper (international conference proceedings), Joint Work, Accepted
-
デジタルスタイルデザインに関する研究 －織物デザイン支援システム－
原歩未，青山英樹
精密工学会誌 (精密工学会) Vol.81 ( No.8 ) pp.793 - 800 2015.08
Research paper (scientific journal), Joint Work, Accepted
-
DIGITAL DESIGN OF CRACK PATTERNS WITH NATURAL IMPRESSIONS ON POTTERY
Kaoru Shimizu, Hideki Aoyama
Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2015) pp.1 - 6 2015.08
Research paper (international conference proceedings), Joint Work, Accepted
-
Tool Paths Planning under Window Framing Scheme for Burr Minimization
Sothea KRUY,Hideki AOYAMA and Noriaki SANO
Journal of the Japan Society for Precision Engineering (精密工学会) Vol.81 ( No.6 ) pp.598 - 603 2015.06
Research paper (scientific journal), Joint Work
-
Development of Automatic Process Planning System for Turning-Milling Center with 2 Turrets System
Khusna DWIJAYANTI, Hideki AOYAMA
Journal of the Japan Society for Precision Engineering (精密工学会) Vol.81 ( No.5 ) pp.471 - 480 2015.05
Research paper (scientific journal), Joint Work, Accepted
-
Electrode Design for Orbiting EDM: An Experimental Approach
Tutik Sriani, Gunawan Setia Prihandana, Hideki Aoyama
Applied Mechanics and Materials (Scientific.Net) Vol.758 pp.159 - 163 2015.04
Research paper (scientific journal), Joint Work, Accepted
-
Current and Future Trends in 3D CAD/CAM
Hideki Aoyama
Proceedings of International Symposium on Uitlaprecision Engineering and Nanotechnology (ISUPEN) pp.9 - 12 2015.03
Research paper (international conference proceedings), Single Work, Accepted
-
Optimization of Control Gains in Numerical Control
Hideki Aoyama, Duo Zhang
Advanced Materials Research Vol. 806 pp.651 - 654 2015
Research paper (scientific journal), Accepted
-
Automatic Workpiece Positioning Method for Machining Operations
Sheng-Han Hsieh, Hideki Aoyama
Proceedings of the ACDDE2014 (Asian Conference on Design & Digital Engineering 2014) 2014.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Prediction of thickness and height of burr based on burr formation mechanisms in end milling
Sothea KRUY, Hideki AOYAMA, Kentaro OHTA, Noriaki SANO
Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.8 ( No.4 ) pp.1 - 11 2014.10
Research paper (scientific journal), Joint Work, Accepted