Papers - Aoyama, Hideki
-
デジタルスタイルデザインに関する研究 －ハイライト曲線に基づく意匠形状の高品位化システム －
生越輝和，青山英樹，大西正和
精密工学会誌 (精密工学会) Vol. 70 ( No. 4 ) pp.495 - 501 2004.04
Research paper (scientific journal), Joint Work, Accepted
-
Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections
Hideki Aoyama, Tomoya Ishi
Journal of Manufacturing Processes Vol.6 ( No.2 ) 141-147 2004.02
Research paper (scientific journal), Joint Work, Accepted
-
工作物フィクスチュアリング計画システムの開発
財津育浩， 青山英樹，青山藤詞郎
設計工学（日本設計工学会誌） (日本設計工学会) Vol. 39 ( No. 2 ) pp.93 - 99 2004.02
Research paper (scientific journal), Joint Work, Accepted
-
Development of the Holonic Fixturing System (HOLOFIX)
I. Zaitsu, H. Aoyama, T. Aoyama, H. Shibata, M. Sudo
Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.719 - 724 2003.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Digital Style Design - Modeling System Based on Highlight Lines-
Terukazu Ogoshi, Hideki Aoyama
Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.797 - 802 2003.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Digital Style Design - Modeling System Based on Characteristic Lines –
Yoshihisa Sakai, Hideki Aoyama
Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.793 - 796 2003.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Database Construction System of Cutting Conditions with Cutting Aspects
Satoshi Kobayashi, Hideki Aoyama
Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.829 - 832 2003.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of Off-line Robot Teaching System Using Virtual Reality Technology
Daisuke Matsumoto, Hideki. Aoyama
Proceedings of 36th CIRP International Seminar on Manufacturing Systems pp.545 - 550 2003.06
Research paper (international conference proceedings), Joint Work, Accepted
-
Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections
Hideki Aoyama, Tomoya Ishi
Transactions of NAMRI/SME Vol. XXXI pp.491 - 498 2003.05
Research paper (scientific journal), Joint Work, Accepted
-
意匠設計支援のための形状嗜好予測に関する基礎研究
松田龍人，青山英樹
デザイン学研究（日本デザイン学会誌） (日本デザイン学会) Vol. 50 ( No.1 ) pp.43 - 48 2003.01
Research paper (scientific journal), Joint Work, Accepted
-
CMPによるシリコンウェハの平坦化に関する研究
佐々木善章，青山英樹，稲崎一郎，柴田博志
日本機械学会論文集（C編） (日本機械学会) 68巻 ( 674号 ) pp.3108 - 3114 2002.10
Research paper (scientific journal), Joint Work, Accepted
-
Computer Aided Chair Design System Using Form Features
Matsumoto Mio, Hideki Aoyama
Proceedings of Sixth International Conference on Information Visualization pp.135 - 138 2002.07
Research paper (international conference proceedings), Joint Work, Accepted
-
Virtual Studio System
Kazuyuki Honda, Hideki Aoyama
Poster Session of International Conference on Information Visualization 2002.07
Research paper (international conference proceedings), Single Work, Accepted
-
Fixturing Functional Model for Automation of Fixturing Planning
Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama
Proceedings of 2002 Japan-USA Symposium on Flexible Automation (2002JUSFA) pp.637 - 640 2002.07
Research paper (international conference proceedings), Joint Work, Accepted
-
Free Form Modeling Method Based on Silhouette and Boundary Lines
Jun Kamiya, Hideki Aoyama
Proceedings of Sixth International Conference on Information Visualization pp.130 - 134 2002.07
Research paper (international conference proceedings), Joint Work, Accepted
-
フィクスチュアリングフィーチャに基づく工作物最適クランプ位置の決定（フィクスチュアリングフィーチャの概念と二次元モデルへの適用）
財津育浩，青山英樹，青山藤詞郎
日本機械学会論文集（C編） (日本機械学会) 68巻 ( 670号 ) pp.1903 - 1909 2002.06
Research paper (scientific journal), Joint Work, Accepted
-
Virtual Clay Modeling System Used for Creating Basic Idea of Product Shape
Hideki Aoyama, Hiroyuki Fujiki
Transactions of NAMRI/SME Vol. XXX pp.681 - 687 2002.05
Research paper (scientific journal), Joint Work, Accepted
-
Construction of three-dimensional Model from Sketch for Style Design of Automobile Body Form
Yoshinori URABE, Hideki AOYAMA
Proceedings of 5th Franco-Japanese Congress & 3rd European-Asian Congress of Mechatronics pp.531 - 535 2001.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Easy Construction of 3D Model from 2D Information
Yoshinori Urabe, Hideki Aoyama
Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.842 - 846 2001.07
Research paper (scientific journal), Joint Work, Accepted
-
Fixturing Feature for Determining Optimum Clamping Points - Concept of Fixturing Feature and its Application to 2-D and 3-D Workpiece Models -
Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama
Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.887 - 891 2001.07
Research paper (scientific journal), Joint Work, Accepted