Papers - Aoyama, Hideki
-
Evaluation System of Designability and Operability of Product Using Mixed Reality Technology
Hideki Aoyama, Yu Kimishima
Proceedings of Asian Conference on Design and Digital Engineering 695-696 2010.08
Research paper (international conference proceedings), Joint Work, Accepted
-
DESIGN EMERGING SYSTEM BY APPLYING CONSUMER’S PREFERENCE TO DESIGNER’S IDEA
Kentarou Ohshima，Hideki Aoyama
Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010) (ASME) 1-10 2010.08
Research paper (international conference proceedings), Joint Work, Accepted
-
SYSTEM FOR 3D FORM GENERATION AND IMPRESSION ANALYSIS BASED ON EMOTIONAL WORDS: “KANSEI WORDS”
Hideki AOYAMA, Shigeto MIYAUCHI
Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010) (ASME) 1-7 2010.08
Research paper (international conference proceedings), Joint Work, Accepted
-
Modeling Method of Aesthetic Shape Based on Refined Curves
Hiroshige Kai, Hideki Aoyama
Proceedings of Asian Conference on Design and Digital Engineering 655-656 2010.08
Research paper (international conference proceedings), Joint Work, Accepted
-
A STUDY ON COMPENSATION OF ORBITAL MOTION TO THE ELECTRODE DESIGN OF ORBITING ELECTRICAL DISCHARGE MACHINING (EDM)
Tutik Sriani, Yuuki Nakamura, Hideki Aoyama
Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) (ISCIE,ASME) 1-7 2010.07
Research paper (international conference proceedings), Joint Work, Accepted
-
Novel Tool Design Method for Orbiting EDM -A 2nd Approach on Design Automation Development in CAD –
Tutik SRIANI, Hideki AOYAMA
Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.4 ( No.7 ) 1261-1271 2010.07
Research paper (scientific journal), Joint Work, Accepted
-
CONSTRUCTION OF 3D CAD MODELS FROM ROUGH SKETCHES
Shota Fukuchi, Hideki Aoyama, Norihito Hiruma
Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) (ISCIE,ASME) 1-7 2010.07
Research paper (international conference proceedings), Joint Work, Accepted
-
System to Intuitively and Interactively Determine Tool Paths and Tool Postures Using Haptic Device
Yumiko Suzuki, Steven Dreier, Hideki Aoyama, and Noriaki Sano
Proceedings of CIRP 2nd International Conference on Process Machine Interactions (CIRP) 1-11 2010.06
Research paper (international conference proceedings), Joint Work, Accepted
-
デジタルスタイルデザインに関する研究 ―木目模様デザインのための基本システムの開発―
柴崎 慧, 青山 英樹
精密工学会誌 (精密工学会) Vol.76 ( No.6 ) 840-845 2010.06
Research paper (scientific journal), Joint Work, Accepted
-
Novel Tool Design Method for Orbiting Electrical Discharge Maching
Tutik SRIANI, Yuki NAKAMURA, Hideki AOYAMA
Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.4 ( No.6 ) pp.1182 - 1191 2010.06
Research paper (scientific journal), Joint Work, Accepted
-
Basic Study on Laser Forming CAM System for Sheet Material Forming Without Dies or Molds
Toshihiko Nakamura, Shotaro Ishihara, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru
International Journal of Automation Technology Vol.4 ( No.5 ) 447-453 2010.05
Research paper (scientific journal), Joint Work, Accepted
-
Efficient Design Method Based on Evaluation Using CAE System
Yuta SAWAI, Hideki AOYAMA
Journal of Advanced Mechanical Design, System, and Manufacturing Vol.4 ( No.5 ) 827-830 2010.05
Research paper (scientific journal), Joint Work, Accepted
-
LINKAGE OF POWER CONSUMPTION TO DESIGN FEATURE ON TURNING PROCESS
ZAHARI TAHA, HANI KURNIATI, HIDEKI AOYAMA, RAJA ARIFFIN GHAZILLA, JULIROSE GONZALES, NOVITA SAKUNDARINI
10th WSEAS Int. Conf. on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ROCOM10)(ROCOM'10) pp.74 - 78 2010.04
Research paper (international conference proceedings), Joint Work, Accepted, ISSN 1790-5117
-
Toolmaking Simulation on Orbiting EDM for Freeform Surface
Tutik Sriani, Tuuki Nakamura, Hideki Aoyama
Proceedings of The 2nd SEEAN University Network/ Southeast Asia Enginnering Education Development Network Regional Conference on Manufacturing Engineering 2009 A59-A64 2009.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Efficient Design Method Based on Evaluation Using CAE System
Yuta Sawai, Hideki Aoyama
Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.257 - 262 2009.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Reverse Engineering System for Functional Parts with Complex Shape
Megumi Sato, Hideki Aoyama
Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.263 - 266 2009.12
Research paper (international conference proceedings), Joint Work, Accepted
-
A Novel Method for Fabrication of Die and Mold in Orbiting Electrical Discharge Machining-Proposition of Electrode Design
Tutik Sriani, Yuki Nakamura, Hideki Aoyama
Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.809 - 814 2009.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Current Situation and Future Prospects of CAD/CAM Systems
Hideki Aoyama
Proceedings of The 2nd SEEAN University Network/ Southeast Asia Enginnering Education Development Network Regional Conference on Manufacturing Engineering 2009 pp.B9 - B14 2009.12
Research paper (international conference proceedings), Single Work, Accepted
-
Electrode Design for Oscillating EDM
Yuki Nakamura, Tutik Sriani, Hideki Aoyama
Advanced in Abrasive Technology XII (The 12the International Symposium on Advanced in Abrasive Technology (ISAAT2009)) (ASTS) pp.645 - 650 2009.09
Research paper (international conference proceedings), Joint Work, Accepted
-
Electrode Design for Oscillating EDM
Yuki Nakamura, Tutik Sriani, Hideki Aoyama
Advanced Material Research Vol.76-78 pp.645 - 650 2009.09
Research paper (scientific journal), Joint Work, Accepted