Papers - Aoyama, Hideki
-
Aesthetic Design Based on “Kansei Language”
Manabu Ota, Hideki Aoyama
Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.917 - 921 2001.07
Research paper (scientific journal), Joint Work, Accepted
-
Autonomous Measurement of Physical Model Shape for Reverse Engineering
Hideki AOYAMA, Yuu Suzuki
Journal of Manufacturing Systems Vol.19 ( No.6 ) 375-383 2001.06
Research paper (scientific journal), Joint Work, Accepted
-
Aesthetic Design System Based on Sketch, Design Language, and Characteristic Lines
Hideki Aoyama, Yoshinori Urabe, Manabu Ohta, Takeo Kusunoki
Proceedings of CIRP 34th International Seminar on Manufacturing Systems pp.83 - 87 2001.05
Research paper (international conference proceedings), Joint Work, Accepted
-
Method for Creating High Quality Computer Model from Rough Model
Hideki Aoyama, Yuichiro Nishizawa
Transaction of NAMRI/SME Vol. XXIX pp.549 - 556 2001.05
Research paper (scientific journal), Joint Work, Accepted
-
Surface Modeling Based on Characteristic Lines
Takeo Kusunoki, Hideki Aoyama
Transaction of NAMRI/SME Vol. XXIX pp.563 - 568 2001.05
Research paper (scientific journal), Joint Work, Accepted
-
AUTONOMOUS MEASUREMENT OF PHYSICAL MODEL SHAPE FOR REVERSE ENGINEERING
Hideki AOYAMA, Yuu Suzuki
Proceedings of Asian Academy Seminar on Advanced Manufacturing System pp.62 - 67 2000.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Surface Modeling Based on Characteristic Lines
Takeo KUSUNOKI, Hideki AOYAMA
Proceedings of 日本機械学会 中国機械学会 国際会議 (ICOMES) 2000.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Application of CAM System by Estimating Cutting Force
Hiroki MURASHITA Hideki AOYAMA
Proceedings of 日本機械学会 中国機械学会 国際会議 (ICOMES) 2000.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Fixturing Feature for Determining Optimum Clamping Points - Concept of Fixturing Feature and its Application to 2D Workpiece Model
Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama
Proceedings of 2000 Japan-USA Symposium on Flexible Automation 2000.08
Research paper (international conference proceedings), Joint Work, Accepted
-
Rapid Construction of Digital Model by Using Virtual Clay Modeling System
Hiroyuki Fujiki, Hideki Aoyama
Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing (Proc. of FAIM 2000) pp.843 - 850 2000.06
Research paper (international conference proceedings), Joint Work, Accepted
-
Construction of High Quality CAD Model from Rough Physical Model
Hideki Aoyama, Yuichiro Nishizawa
Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing (Proc. of FAIM 2000) pp.813 - 822 2000.06
Research paper (international conference proceedings), Joint Work, Accepted
-
Basic Study on Development of Sensor to Detect Cutting Force Components Based on Villari Effect
Hideki Aoyama, Akio Amemiya, Ichiro Inasaki
Transactions of NAMRI/SME Vol. XXVIII pp.323 - 328 2000.05
Research paper (scientific journal), Joint Work, Accepted
-
Fiber optic surface topography measurement sensor and its design study
Yue Yang, Kazuo Yamazaki, Hideki Aoyama, Sadayuki Matumiya
Precision Engineering Vol. 24 ( No. 1 ) pp.32 - 40 2000.01
Research paper (scientific journal), Joint Work, Accepted
-
Autonomous Measurement of Objects for Reverse Engineering
Khoichiro Nakayama, Hideki Aoyama
CIRP-Journal of Manufacturing Systems Vol. 30 ( No.1 ) pp.57 - 64 2000.01
Research paper (scientific journal), Joint Work, Accepted
-
Development of Virtual Clay Modeling System
Hiroyuki Fujiki, Hideki Aoyama
CIRP-Journal of Manufacturing Systems Vol. 30 ( No.1 ) pp.71 - 76 2000.01
Research paper (scientific journal), Joint Work, Accepted
-
切削抵抗力見積りCAMシステムの開発
村下弘樹、青山英樹
型技術 (日刊工業新聞社) Vol.14 ( No.12 ) 24-25 1999.12
Research paper (scientific journal), Joint Work
-
Basic Research on Development of Magnetostrictive Sensor for Detecting Cutting Force
Hideki AOYAMA, Hiroki MURASHITA, Tomoya ISHII, Hiro OHZEKI
Proceedings from ASPE 1999 Annual Meeting Vol. 20 pp.256 - 259 1999.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
Hiro Ohzeki, Akihiro Mashine, Hideki Aoyama, Ichiro Inasaki
Journal of Manufacturing Science and Engineering (Transactions of the ASME) Vol. 121 pp.615 - 622 1999.11
Research paper (scientific journal), Joint Work, Accepted
-
リバースエンジニアリングにおける物理モデル形状の自動計測
青山英樹，鈴木由宇
精密工学会誌(1999) (精密工学会) Vol. 65 ( No.7 ) pp.1016 - 1020 1999.07
Research paper (scientific journal), Joint Work, Accepted
-
Autonomous Measurement of Object for Reverse Engineering
Koichiro NAKAYAMA, Hideki AOYAMA
Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems, (Leuven, Belgium, May 24-26, 1999) (Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems) pp.73 - 82 1999.05
Research paper (international conference proceedings), Joint Work, Accepted