Details of a Researcher - Aoyama, Hideki

Papers - Aoyama, Hideki

Division display >> ／ All the affair displays 1 - 365 of about 365

Simulation of Shrinkage Errors in Processes of Selective Laser Sintering with a Milling Function

Atsushi Ozono, Hideki Aoyama, Ichiro Araie

Proceedings of The 23rd International Symposium on Advances in Abrasive Technology 362 - 365 2021.11

Research paper (international conference proceedings), Accepted

In-process measurement of Melt Pool Temperature for High-Quality Modeling in Directed Energy Deposition

Teppei Shimada, Hideki Aoyama, Masahiro Ueda, Kazuo Yamazaki

Proceedings of The 23rd International Symposium on Advances in Abrasive Technology 354 - 357 2021.11

Research paper (international conference proceedings), Accepted

High-efficiency and High-quality Modeling using Directed Energy Deposition Based on Real-time Control of Modeling Paths

Erika Okamoto, Hideki Aoyama, Kengo Aizawa, Masahiro Ueda, Kazuo Yamazaki

(Proceedings of The 23rd International Symposium on Advances in Abrasive Technology) 358 - 368 2021.11

Research paper (international conference proceedings), Accepted

Method for Simulation of Femtosecond Laser Ablation Based on Modeling of Physical Phenomena

Shusuke Hironaka, Hideki Aoyama, Kazuo Yamazaki

(Proceedings of The 23rd International Symposium on Advances in Abrasive Technology) 379 - 382 2021.11

Research paper (international conference proceedings), Accepted

Automatic Inspection of Automobile Headlamp Lenses Using Deep Learning

Naoki ONO, Hideki AOYAMA

Proccedings of The 10th International Conference on Leading Edge Manyufactuyring in 21st Century (LEM21) 1 - 3 2021.11

Research paper (international conference proceedings), Accepted

High-Precision Machining of Free Curved Surfaces Based on Correction of Ball End Mill Bending

Asuka UCHIDA, Hideki AOYAMA

Proccedings of The 10th International Conference on Leading Edge Manyufactuyring in 21st Century (LEM21) 1 - 4 2021.11

Research paper (international conference proceedings), Accepted

デジタルスタイルデザインに関する研究　－感性，印象の融合，パターンの連結に基づくシボデザインシステムの開発－

莅戸康暉，青山英樹，森幸雄

精密工学会誌 (精密工学会) vol. 87 ( No. 10 ) 821 - 826 2021.10

Green product preferences considering cultural influences: a comparison study between Malaysia and Indonesia

Ihwan Ghazali, Salwa Hanim Abdul-Rashid, Siti Zawiah Md Dawal, Hideki Aoyama, Novita Sakundarini, Fu Haw Ho, Safarudin Gazali Herawan

Management of Environmental Quality Volume 32 2021.05

Shrinkage Error Analysis in Selective Laser Sintering Hybrid Milling

Nguyen T.N., Aoyama H., Araie I.

International Journal of Precision Engineering and Manufacturing Vol. 22 2021.05

ISSN 22347593

Selective laser sintering hybrid milling (SHM) is an advanced manufacturing process that combines the advantages of both metal powder bed fusion and milling. Using this technology, extremely complex products can be fabricated with high accuracy and reasonable surface quality. SHM has enormous potential in the application of mold fabrication; molds with free-form inner cooling channels can be produced with this technology. The key feature of this technology is that milling is conducted not only after, but also during the forming process. However, this leads to the issue that although machined layers of products have a high level of accuracy without thermal deformation, the addition of new layers causes the materials to undergo shrinkage and deformations to occur on their machined layers. The dimensional error due to shrinkage significantly affects to the accuracy of SHM process; therefore, a completely understanding of the formation error due to shrinkage is highly important in developing efficient solutions. In this study, shrinkage deformation is observed in detail through the results of simulation using finite element analysis. Three shrinkage rules and the unclamping effect are proposed to completely explain the shrinkage error shape in SHM. Finally, an experiment is conducted to confirm the final result of shrinkage.

Access to Document (DOI)

工作機械の加減速制御に伴う実送り速度の同定に基づく工具たわみ量の補正による加工精度の向上

安田玲，野口知哉，青山英樹

精密工学会誌 (精密工学会) Vol. 87 ( No. 5 ) 475 - 482 2021.05

Development of a simulation method for three-dimensional shape generation by femtosecond laser ablation on binderless nano-polycrystalline diamond

Nabetani S., Aoyama H., Ueda M., Ogawa Y., Kobayashi Y., Yamazaki K.

Precision Engineering (Precision Engineering) Vol. 67 262 - 268 2021.01

ISSN 01416359

One advantage of a femtosecond laser is that it enables the processing of materials that are otherwise difficult to process via conventional methods such as cutting, grinding, electric discharge machining, etc. However, it is difficult to predict a three dimensional shape processed by the laser. To achieve required three-dimensional shapes using femtosecond lasers with high accuracy and efficiency, it is essential to develop a computer-aided manufacturing (CAM) system that generates processing data (NC data). In this paper, a simulation method is proposed for femtosecond laser processing, which is the basis for the development of a CAM system. A binderless nano-polycrystalline diamond is used as the workpiece material to test the proposed method. Based on a comparison with the experimental results, it is confirmed that the processing shape could be simulated at a high accuracy for fixed-point irradiation as well as scanning irradiation.

Access to Document (DOI)

Prompt estimation of die and mold machining time by AI without NC program

Takizawa H., Aoyama H., Won S.C.

International Journal of Automation Technology Vol. 15 ( No. 3 ) 350 - 358 2021

ISSN 18817629

Machining time estimation is essential for the due-date estimation of products as well as for production plan-ning. Conventionally, machining time has been estimated by a computer aided manufacturing (CAM) system, which requires time and effort to create its nu-merical control (NC) program and requires machining expertise to operate it. In addition, among the problems with conventional methods, an error in the estimated machining time arises owing to the machine tool’s control characteristics. In this study, an artificial intelligence (AI)-based system capable of estimating machining time promptly and simply based on shape data without requiring any NC program is developed. The input data to the AI system are color information regarding the machined depths, which are used to estimate the rough-machining time, and color information regarding the machined surface curvature distributions to estimate the finish-machining time. Color information on the machined depths and machined surface curvature distributions is created using three-dimensional computer aided design (3D CAD) data. To build the AI system, the shape data and machining time data accumulated at the machining site are used, so that the machining time estimated reflects the machining method, machining expertise, and the machine tool characteristics employed.

Access to Document (DOI)

Generation method of cutting tool paths for high-speed and high-quality machining of free-form surfaces

Takanashi Y., Aoyama H., Won S.C.

International Journal of Automation Technology Vol. 15 ( No. 4 ) 521 - 528 2021

ISSN 18817629

In general, NC programs for machining free-form surfaces using a computer numerical control (CNC) machine tool are generated using a computer-aided manufacturing (CAM) system. The tool paths (CL data) generated by a CAM system are approximated straight-line segments based on tolerance (allowable error). As a result, the tolerance affects the machining accuracy and time. If the tolerance is set to a small value, the lengths of the segments are shortened, and the machining accuracy is improved. The process in which a CNC machine tool reads and analyzes an NC program and controls the motors requires a mini-mum processing time of an NC program block (block-processing time). Therefore, if the lengths of the approximated straight-line segments are too small, it will be impossible to reach the indicated feed speed, and the machining time will be longer. In this study, by identifying the block-processing time of a CNC con-troller and deriving the appropriate length of the approximated straight-line segment based on the block-processing time, a CL data creation method that is ca-pable of high-speed and high-accuracy free-form surface machining is proposed. In addition, experimental verification tests of the method are conducted.

Access to Document (DOI)

Recognition of the Real Trajectory of Cutting Tool and the Improvement of Tool Path Accuracy Based on the Identification of Acceleration and Deceleration Control of Machine Tool

TomoyaNoguchi, Hideki Aoyama

Proceedings of the 22nd International Sysmposium on Abrasive Technology (ISAAT2019) USB 1 - 8 2020.12

Research paper (international conference proceedings), Accepted

High-Precision Machining Based on the Prediction of Tool Deflection Error in End Milling

Rei Yasuda, Hideki Aoyama

Proceedings of the 22nd International Sysmposium on Abrasive Technology (ISAAT2019) USB 1 - 6 2020.12

Research paper (international conference proceedings), Joint Work, Accepted

Wrinkle Redesign Based on KANSEI Requirements and Processing System

Koki NOZOMUTO, Hideki AOYAMA, Yukio MORI

Proceedings of International Conference on Precision Engineering (ICPE2020) 2020.11

Research paper (international conference proceedings)

Assembly shop scheduling for collaboration of humans, robots and AGVs

Kosuke INOUE, Hideki AOYAMA

Proceedings of International Conference on Precision Engineering (ICPE2020) 2020.11

Research paper (international conference proceedings)

Precise Simulation of Femtosecond Laser Processing Based on Identification of Ablation Parameters by On-Machine Measurement

Hiroyuki KAWAKAMI, Shunsuke NABETANI, Masahiro UEDA, Hideki AOYAMA, Kazuo YAMAZAKI

Proceedings of International Conference on Precision Engineering (ICPE2020) 2020.11

Research paper (international conference proceedings)

Quantification of Disturbance Error of Magnetic Encoder by Simulation

Chihiro MURAYAMA, Shigeaki MARUYAMA, Hideki AOYAMA, Kazuo YAMAZAKI

Proceedings of International Conference on Precision Engineering (ICPE2020) 2020.11

Research paper (international conference proceedings)

統合CNCシステム開発のための基礎研究　－加工技術情報をフィードバックする仕組みによる生産性工場－

須藤雅子，青山英樹

精密工学会誌 (精密工学会) Vol. 86 ( No. 10 ) 806 - 812 2020.10

Predictive shrinkage error model for selective laser sintering hybrid milling

Nguyen T.N., Aoyama H., Raie I.A.

Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering (Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering) Vol. 86 ( No. 9 ) 687 - 701 2020.09

ISSN 09120289

Selective laser sintering hybrid milling (SHM) is an advanced manufacturing technology that combines the flexibility of additive manufacturing with the precision of traditional machining. In SHM, instead of machining the products after they are completely formed using selective laser sintering (SLS), the milling process is conducted alternatively with the SLS. This allows direct fabrication of extremely complicated and high-precision products on the same workstation. However, shrinkage owing to SLS is a fundamental problem of this technology, because it creates significant dimensional errors in the final product. In this study, a method is proposed to calculate shrinkage error in SHM based on equations built from the data collected using F E A . Consequently, the calculation result is used to compensate the SHM shrinkage error. The experimental results of this study confirm that the error prediction model and the proposed compensation technique work efficiently in reducing SHM error.

Access to Document (DOI)

Evaluation of turned and milled surfaces roughness using convolutional neural network

Rifai A.P., Aoyama H., Tho N.H., Md Dawal S.Z., Masruroh N.A.

Measurement: Journal of the International Measurement Confederation (Measurement: Journal of the International Measurement Confederation) 161 2020.09

ISSN 02632241

© 2020 Elsevier Ltd Existing computer vision methods to measure surface roughness rely on feature extraction to quantify the surface morphology and build prediction models. However, the feature extraction is a complicated process requiring advanced image filtering and segmentation steps, resulting in long prediction time and complex setup. This study proposes the use of convolutional neural network to evaluate the surface roughness directly from the digital image of surface textures. This method avoids feature extraction since this step is integrated inside the network during the convolution process. Five loss functions for the prediction models are selected and analyzed based on their suitability and accuracy. The predicted values obtained are compared to the actual surface roughness values measured using a stylus-based profilometer. The performance of the proposed model is evaluated for the prediction of the surface roughness of typical machining operations, such as outside diameter turning, slot milling, and side milling, at various cutting conditions.

Access to Document (DOI)

Tool path generation method for high-quality machining of free-form surfaces

Takanashi Y., Aoyama H.

Proceedings of the ASME 2020 International Symposium on Flexible Automation ISFA2020 2020.07

Research paper (international conference proceedings)

Access to Document (DOI)

High-precision forming process based on analysis of selective laser sintering hybrid milling

Nguyen T.N., Aoyama H., Araie I.

Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering (Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering) Vol. 86 ( No. 7 ) 562 - 571 2020.07

ISSN 09120289

Selective laser sintering hybrid milling (SHM) is an advanced manufacturing technology that combines the advantages of additive manufacturing and traditional machining. This technology is used to fabricate extremely complicated and high-precision products. The key factor of SHM is the milling process that is performed during the depositing process. However, the thermal shrinkage during the cooling process when depositing new layers on the ones that were machined is a fundamental problem because it creates deformation errors which significantly reduce product accuracy. In this study, the thermal deformation error in SHM was investigated using finite element analysis (FEA) and confirmed experimentally. The mechanism involved in the shrinkage in SHM was studied using three shrinkage rules. Moreover, a compensation technique was proposed with the aim of reducing the thermal deformation error. The results proved that compensation could significantly reduce the deformation error in SHM.

Access to Document (DOI)

Basic development of data sharing CNC system (Case study on high accuracy machining of characteristic lines)

Masako SUDO, Hideki AOYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.14 ( No.1 ) 1 - 11 2020

Research paper (scientific journal), Accepted

Simulation method on three-dimensional shape generation process by femtosecond laser ablation

Kawakami H., Nabetani S., Ueda M., Ogawa Y., Yamazaki K., Aoyama H.

Procedia CIRP (Procedia CIRP) 95 921 - 926 2020

ISSN 22128271

Ablation processing using a femtosecond laser has the advantage of processing materials that are impossible to machine by conventional methods. However, it is difficult to predict the three-dimensional removal shape owing to a femtosecond laser irradiation and the current processing method, repeating through trial and error, is inefficient and expensive. For this reason, for processing materials to desired shapes using a femtosecond laser, development of a simulation system and a CAM (Computer-Aided Manufacturing) system are indispensable. In this paper, a simulation method for processing materials using a femtosecond laser is proposed and conducted to nano-polycrystalline diamond (NPD). It is confirmed that the proposed method can precisely simulate the femtosecond laser processing for three-dimensional shape generation. Therefore, the proposed method enables to predict the removal shape identified as the virtual tool shape for calculating a tool path on a CAM system. In addition, an automation process method including an on-machine real-time measurement system of the proposed method is described.

Access to Document (DOI)

Rapid estimation of die and mold machining time without NC data by AI based on shape data

Takizawa H., Aoyama H., Won S.C.

2020 International Symposium on Flexible Automation, ISFA 2020 (2020 International Symposium on Flexible Automation, ISFA 2020) 2020

Rapid estimation of machining time is necessary for flexible production scheduling and early responses regarding delivery date. It is also important for selecting the most suitable of a factory's many machine tools. Usually, machining time is estimated based on an NC program. However, this takes time to generate and its estimation accuracy is not ideal because it cannot consider the control characteristics of the machine tool. This study proposes a new method for rapidly estimating die and mold machining time without generating an NC program: inputting curvature and machining depth distributions into AI as color information.

Access to Document (DOI)

High efficiency molding by real-time control of distance between nozzle and melt pool in directed energy deposition process

Aizawa K., Ueda M., Shimada T., Aoyama H., Yamazaki K.

JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020 (JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020) 2020

Laser metal deposition (LMD) is an additive manufacturing technique, whose performance can be influenced by a considerable number of factors and parameters. Typically, a powder is carried by an inert gas and sprayed by a nozzle, with a coaxial laser beam passing through the nozzle and overlapping the powder flow, thereby generating a molten material pool on a substrate. Monitoring the evolution of this process allows for a better comprehension and control of the process, thereby enhancing the deposition quality. As the metal additive manufacturing mechanism has not yet been elucidated, it is not clear how process parameters affect material properties, molding accuracy, and molding efficiency. When cladding is performed under uncertain conditions, a molded part with poor material properties and dimensional accuracy is created. In this paper, we propose a method for high efficiency molding by controlling the distance between the head nozzle and the molten pool in real time. The distance is identified by an originally developed sensor based on a triangulation method. According to the distance, the head nozzle is automatically controlled into the optimum position. As a result, an ideal molding process can be generated, so that high efficiency molding and high-quality material properties can be obtained. Experimental results show that continuing deposition at the optimum distance assists in achieving deposition efficiency and dimensional accuracy. According to the specific experimental results of this method, the modeling efficiency was increased by 27% compared to the method without correction, and the modeling was successful with an error within 1 mm.

Access to Document (DOI)

Basic study on development of integrated CMC system -productivity improvement by feedback mechanism of machining technology information-

Sudo M., Aoyama H.

Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering (Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering) 86 ( 10 ) 806 - 812 2020

ISSN 09120289

In order to achieve high precision machining and high productivity, it is necessary to optimize machining data for a machine tool to be used, its control system, and shapes to be machined. Machining data are usually not optimized because it is generated by the CAM system as NC data based on general information. In the conventional process chain, even if the machining data is properly improved at the production site, there is no mechanism to reflect that in the previous process, so that the improvement information is not utilized. In this study, a shared database and a data model to share and inherit information in all processes from design to production is proposed in order to generate optimized machining data for the target machine tool and machining shape. The shared database and the data model enable non-expert operators to generate high-quality machining data like experts. In addition, it is also possible to reuse the information on the modified cutting conditions improved by experts at the machining site via a shared database. The effectiveness of the proposed shared database and data model is confirmed by experiments.

Access to Document (DOI)

Advanced linear encoder calibration system with sub-nanometer resolution

Taniguchi K., Tamiya H., Enomoto T., Aoyama H., Yamazaki K.

CIRP Annals (CIRP Annals) 69 ( 1 ) 437 - 440 2020

ISSN 00078506

Calibration of linear encoders has conventionally been performed using an optical interferometer for reference. Calibration using the optical interferometer, however, cannot fulfill the accuracy and stability requirements when the linear encoders exhibit sub-nanometer resolution. This study describes a new calibration method developed using the picometer resolution laser holographic scale as a reference, employing a range-dependent and minimum error-variance algorithm. The method has been evaluated via comparison tests with conventional optical-interferometer-based methods. Moreover, it has also been verified to achieve higher resolution, accuracy, and higher stability during the measurements, even in the atmospheric environment.

Access to Document (DOI)

Automatic Generation System of Apparel Design Based on Tacit Preference of Customer

Yuki Inoue, Hideki Aoyama

Proceedings of The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019) USB 1 - 4 2019.11

Research paper (international conference proceedings), Accepted

Basic Study on Dressing Simulation Using Mechanical Cloth Properties Obtained by Simple Measurement

Yuna Akatsuka, Hideki Aoyama

Proceedings of The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019) USB 1 - 4 2019.11

Research paper (international conference proceedings), Joint Work, Accepted

Toolpath Generation Method for High Accuracy Machining Based on Acceleration/Deceleration Characteristics of Machine Tools

Than Trong Khanh DAT, Hideki AOYAMA AOYAMA

Proceedings of The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019) USB 1 - 4 2019.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of a three-dimensional encoder for highly accurate positioning

Hideaki TAMIYA, Yoshiyuki MITERA, Kayoko TANIGUCHI, Hideki AOYAMA, Kazuo YAMAZAKI

精密工学会 Vol.85 ( No.10 ) 891 - 895 2019.10

Accepted

ナノ多結晶ダイヤモンドエンドミルの超硬合金加工性とフェムト秒レーザによる工具成形

小河誉典，片平和俊，島田浩之，山崎和雄，青山英樹

砥粒加工学会誌 Vol.63 ( No.9 ) 470 - 477 2019.09

Research paper (scientific journal), Accepted

Development of Linear Scale Calibration System with Sub-nanometer Resolution

Kayoko Taniguchi, Hideaki Tamiya, Tsutomu Enomoto, Hideaki Aoyama and Kazuo Yamazaki

Proceedings of the 14th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII2019) USB 1 - 4 2019.09

Research paper (international conference proceedings), Joint Work, Accepted

Surface roughness estimation and chatter vibration identification using vision-based deep learning

Rifai A., Fukuda R., Aoyama H.

Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering (Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering) Vol. 85 ( No. 7 ) 658 - 666 2019.07

ISSN 09120289

© 2019 Japan Society for Precision Engineering. All rights reserved. This study presents the development of an automatic, low-cost, fast, and reliable non-contact system for surface roughness estimation and chatter vibration identification based on machine vision. The developed system focuses on predicting two critical problems in the machining process, which are surface roughness and chatter vibration, using images as input. Deep learning with convolutional neural networks is integrated into the system to bypass the feature extraction method traditionally used in conventional vision-based roughness and chattel predictions. Two systems are proposed: Separate models that work specifically for each problem, and a combined model Thai aims to predict both problems in one process. Four deep learning architectures are proposed for both systems. The proposed models are built and tested on turned and milled surface datasets. A set of machining experiments are performed with various cutting conditions to generate the training and testing data. The result of the prediction model is then analyzed and compared with the measured data using a contact-based profilomctcr. The results indicate that the proposed system performs favorably in terms of accuracy and processing time, thus offering a promising alternative for quick inspection of surface quality.

Access to Document (DOI)

Development of Simulation Method on Three-Dimensional Shape Generation Process by Femtosecond Laser Ablation

Shunsuke Nabetani, Hideki Aoyama, Kazuo Yamazaki, Masahiro Ueda, Yoshinori Ogawa

Proceedings of MTTRF/IAM-CNC ANNUAL MEETING 2019 2019.06

Research paper (international conference proceedings)

Image Based Identification of Cutting Tools in Turning-Milling Machines

Achmad Pratama RIFAI, Ryo FUKUDA, Hideki AOYAMA

精密工学会 Vol.85 ( No.2 ) 159 - 166 2019.02

Research paper (scientific journal), Joint Work, Accepted

Basic Study on Rapid Estimation of Machining Time Based on AI with two-Dimensional Data (Trihedral Figures)

Hiroki Takizawa, Hideki Aoyama, Song Cheol Won

(International Journal of Materials, Mechanics and Manufacturing) Vol. 7 ( No. 6 ) 235 - 239 2019

Research paper (scientific journal)

Automatic On-Machine Identification of Cutting Tool Setting Parameters Using Vision and Displacement Sensor

Achmad Rifai, Ryo Fukuda, Hideki Aoyama

Proceedings of 17th International Conference on Precision Engineering(ICPE2018） 7 pages（USB) 2018.11

Research paper (international conference proceedings), Joint Work, Accepted

Basic Development of Three Dimensional Encoder for Highly-accurate Positioning

hideaki tamiya, yoshiyuki mitera, kayoko taniguchi, hideki aoyama, kazuo yamazaki

Proceedings of 17th International Conference on Precision Engineering(ICPE2018） 5 pagesn（USB) 2018.11

Research paper (international conference proceedings), Joint Work, Accepted

Productivity Improvement of Smart Factory by Innovative IoT Platform

Masako SUDO and Hideki AOYAMA

Proceedings of 17th International Conference on Precision Engineering(ICPE2018） 5 pagesn（USB) 2018.11

Research paper (international conference proceedings), Joint Work, Accepted

Recognition of Real Trajectory of Cutting Tool Motion Based on Identification of Acceleration and Deceleration in Machine Tool Control

Tomoya Noguchi and Hideki Aoyama

Proceedings of the 2018 Asian Conference on Design and Digital Engineering(ACDDE2018) 10 pages（USB) 2018.11

Research paper (international conference proceedings), Joint Work, Accepted

Automatic Database Construction and Utilization Method of Machining Know-How

Ryo Fukuda and Hideki Aoyama

Proceedings of the 2018 Asian Conference on Design and Digital Engineering(ACDDE2018) 10 pages（USB) 2018.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of a simulation method of three-dimensional ultrafine processing by femtosecond laser

ShunsukeNabetani, Hideki Aoyama,Masahiro Ueda,Yoshinori Ogawa,Kazuo Yamazaki

Proceedings of the 21st International Symposium on Advances in Abrasive Technology(ISAAT2018) 6 pages(USB) 2018.10

Research paper (international conference proceedings), Joint Work, Accepted

Development of design system for crack patterns on cup surface based on KANSEI

Mai Misaka, Hideki Aoyama

Journal of Computational Design and Engineering Volum 5 ( Issue 4 ) Pages 435-441 2018.10

Research paper (scientific journal), Joint Work, Accepted

Analysis of tool deflection errors in precision CNC end milling of aerospace Aluminum 6061-T6 alloy

Nghiep T., Sarhan A., Aoyama H.

Measurement: Journal of the International Measurement Confederation (Measurement: Journal of the International Measurement Confederation) 125 476 - 495 2018.09

ISSN 02632241

© 2018 Elsevier Ltd Especially with increased cutting forces using complex-shape tools such as long end milling tools, deflection in machining significantly affects the dimensions and geometry. This kind of error in end milling may be efficiently reduced by controlling the cutting parameters and properly selecting a suitable lubrication mode. The target of this research is to study the mechanism of deflection error and find the optimum condition for the cutting process to minimize deflection error. In this research, lubrication mode is considered one of four factors affecting deflection error in traditional flood lubrication, Minimal Quantity Lubrication (MQL), nanolubrication and dry cutting, which are used in the machining process with end milling tools. The three other parameters are axial depth of cut, radial depth of cut, and feed of cut. The workpiece material used in this research is AL 6061-T6, the cutting tool used is HSS end milling with diameter 4 mm, and the mode employed is side milling. The experiment is designed according to the Taguchi method, and it includes sixteen samples. The cutting fore and deflection error on a workpiece are recorded and then analyzed by S/N response analysis and analysis of variance (using Pareto ANOVA). The results indicate that radial depth of cut affects nearly 95% to deflection error. The effect of the other factors is not considerable. The optimum deflection error (31.22 μm) is attained at the lowest level of radial depth of cut (0.32 mm) and feed of cut (250 mm/min), and the second level of axial depth of cut (10 mm) and Minimal Quality Lubrication. A model of tool deflection named Instantaneous Deflection is defined and used to explain the phenomenon of deflection error. This model can explain the mechanism of deflection in end milling much better than average cutting force models. It proves that cutting force and distance between tool holder and cutting point are two parameters affecting deflection error. Between these two factors, cutting force has a much more significant effect. Cutting force is also proven to have a strong linear relationship with deflection error.

Access to Document (DOI)

Super-Accurate Angular Encoder System with Multi-Detecting Heads Using VEDA Method

Nobuyuki ISHII, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA

精密工学会誌 (精密工学会) Vol.84 ( No.8 ) pp.717 - 723 2018.08

Research paper (scientific journal), Joint Work, Accepted

Method of Emerging Delight Design Based on KANSEI

Yukako Tanaka,Hideki Aoyama

Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE, 2018) 8 pages 2018.08

Research paper (international conference proceedings), Joint Work, Accepted

Access to Document (DOI)

Robust Design Method For KANSEI Using Taguchi Method And Neural Networks: A Case Study On Plaid Patterns

Mai Misaka,Hideki Aoyama

Proceedings of the ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE, 2018) 2018.08

Accepted

A COMPARATIVE STUDY ON MICRO MACHINING OF SUPER FINE GRAIN TUNGSTEN CARBIDE BY VARIOUS MICRO PCD BALL END-MILLING TOOLS

Yoshinori Ogawa, Kazutoshi Katahira, Hiroyuki Shimada, Kazuo Yamazaki, Hideki Aoyama

Proceedings of International Symposium on Flexible Automation(ISFA2018) pp. 1 - 4 2018.07

Research paper (international conference proceedings), Joint Work, Accepted

Future Oriented Research for Integrated of Digital Design and Digital Manufacturing

Hideki Aoyama

Proceedings of MTTRF/iAM-CNC Annual Meeting 2018 pp.27 - 34 2018.07

Research paper (international conference proceedings), Single Work, Accepted

Experimental Investigation of BLPCD Characteristics to Develop CAM System and Simulation System for Femtosecond Laser Processing

Shunsuke Nabetani, Hideki Aoyama, Masahiro Ueda, Yoshinori Ogawa, Kazuo Yamazaki

Proceedings of MTTRF/iAM-CNC Annual Meeting 2018 pp.19 - 26 2018.07

Research paper (international conference proceedings), Joint Work, Accepted

Modification method of drawn design on decorating film/shrink film for obtaining distortion-free design

Shoko Fujii, Ruka Suzuki, Hideki Aoyama, Yukio Mori

Computer-Aided Design and Applications (Taylor and Francis Group) pp.1 - 7 2018.03

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Non-dominated sorting biogeography-based optimization for bi-objective reentrant flexible manufacturing system scheduling

Rifai A., Nguyen H., Aoyama H., Dawal S., Masruroh N.

Applied Soft Computing Journal (Applied Soft Computing Journal) 62 187 - 202 2018.01

ISSN 15684946

© 2017 Scheduling in flexible manufacturing systems (FMS) is described as an NP-Hard problem. Its complexity has increased significantly in line with the development of FMS over the past years. This paper presents a non-dominated sorting biogeography-based optimization (NSBBO) for scheduling problem of FMS having multi loading-unloading and shortcuts infused in the reentrant characteristics. This model is formulated to identify the near optimal trade-off solutions capable of addressing the bi-objectives of minimization of makespan and total earliness. The goal is to simultaneously determine the best machine assignment and job sequencing to satisfy both objectives. We propose the development of NSBBO by substituting the standard linear function of emigration-immigration rate with three approaches based on sinusoidal, quadratic and trapezoidal models. A selection of test problems was examined to analyze the effectiveness, efficiency and diversity levels of the proposed approaches as compared to standard NSBBO and NSGA-II. The results have shown that the NSBBO-trapezoidal model performed favorably and is comparable to current existing models. We conclude that the developed NSBBO and its variants are suitable alternative methods to achieve the bi-objective satisfaction of reentrant FMS scheduling problem.

Access to Document (DOI)

Basic study on automatic determination of injection conditions based on automatic recognition of forming states

Masaki OGAWA, Hideki AOYAMA, Noriaki SANO

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.12 ( Issue 6 ) 11 pages 2018

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Development of super-accurate angular encoder system with multi-detecting heads using VEDA method

Nobuyuki ISHII, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.12 ( Issue 5 ) 13 pages 2018

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Detection principle and verification of non-contact displacement meter with pico-meter resolution

AOYAMA HIDEKI

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.12 ( Issue 5 ) 7 pages 2018

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Green Product Preferences with Respect to Cultural Influences: Empirical Study in Indonesia

Ihwan Ghazali, Salwa Hanim Abdul Rashid, Siti Zawiah Md Dawal, Hideki Aoyama, Alva Edy Tontowi, Raja Ariffin Raja Ghazilla

International Journal of Automation Technology (Fuji Technology Press Ltd.) Volume 12 ( Issue 6 ) pages 842 - 852 2018

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Identification of Cutting Tool for Avoiding Collision in Turning-Milling Machine

Achmad Pratama Rifai, Hideki Aoyama

Proceedings of the 20th International Symposium on Advances in Abrasive Technology (ISAAT2017) pp.477 - 482 2017.12

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Development of Innovative CNC for Improving Machining Quality Based on Data Sharing

Masako SUDO, Toru MIZUNO, Hideki AOYAMA

Proceedings of The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 4 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

Study on Molding Conditions of Highly Accurate Metal Additive Manufacturing

Tomohiro Satou, Hideki Aoyama

Proceedings of The 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017) pp.1 - 4 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

DEVELOPMENT OF AUTOMATIC SYSTEM FOR PROCESS PLANNING AND NC PROGRAM GENERATION ON TURNING-MILLING MACHINE TOOL WITH THREE TURRETS

Ryo Fukuda, Ririko Kiyooka and Hideki Aoyama

Proceedings of the ASME 2017 International Mechanical Engineering Congress & Exposition (IMECE 2017) pp.1 - 9 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

METHOD FOR PRODUCING THREE-DIMENSIONAL DESIGN IN FILM INSERT MOLDING

Shoko Fujii, Hideki Aoyama, Yukio Mori, Youichi Azagami and Syouji Harada

Proceedings of the ASME 2017 International Mechanical Engineering Congress & Exposition (IMECE 2017) pp.1 - 6 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

Performance Improvement of Machine Tool by High Accuracy Calibration of Built-in Rotary Encoders

Nobuyuki ISHII, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA

Proceedings of The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 4 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

Detection Principle and Verification of Non-contact Displacement Meter with Pico-meter Resolution

Hideaki TAMIYA, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA

Proceedings of The 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 4 2017.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of Model Identification Methodology Based on Form Recognition for Computer-Aided Process Planning

Alejandro DE ARRIBA-MANGAS, Ryo FUKUDA, Hideki AOYAMA

Journal of Advanced Mechanical Design, System, and Manufacturing Vol. 11 ( No. 5 ) pp. 1 - 13 2017.10

Research paper (scientific journal), Joint Work, Accepted

デジタルスタイルデザインに関する研究－感性に基づく貫入模様デザインシステム－

清水薫，青山英樹

精密工学会誌 (精密工学会) Vol.83 ( No.10 ) pp.972 - 978 2017.10

Research paper (scientific journal), Joint Work, Accepted

Optimization of hole making processes considering machining time and machining accuracy

Eric H. GUIOTOKO, Hideki AOYAMA, Noriaki SANO

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.11 ( No.4 ) pp.1 - 13 2017.09

Research paper (scientific journal), Joint Work, Accepted

Basic Study on Automatic Determination of Injection Conditions Based on Automatic Recognition of Forming States

Masaki OGAWA, Hideki AOYAMA, Noriaki SANO

Proceedings of International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference 2017 (iDECON/MS2017) pp.1 - 8 2017.09

Research paper (international conference proceedings), Joint Work, Accepted

マルチタレット型複合加工機のための自動工程設計・NCプログラム生成システム

清岡李里子，Khusna Dwijayanti，青山英樹

精密工学会誌 (精密工学会) Vol.83 ( No.9 ) pp.878 - 882 2017.09

Research paper (scientific journal), Joint Work, Accepted

Development of accurate estimation method of machining time in consideration of characteristics of machine tool

Yuki YAMAMOTO, Hideki AOYAMA, Noriaki SANO

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.11 ( No.4 ) pp.1 - 10 2017.09

Research paper (scientific journal), Joint Work, Accepted

BASIC STUDY ON DEVELOPMENT OF DELIGHT DESIGN METHOD -PROPOSAL AND APPLICATION OF BEER CUP DESIGN BASED ON VALUE MODEL AND EVALUATION MODEL OF KANSEI-

Yukako Tanaka, Mai Misaka, Hideki Aoyama

Proceedings of the ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE, 2017) (ASME) pp.1 - 9 2017.08

Research paper (international conference proceedings), Joint Work, Accepted

Modification Method of Drawn Design on Decorating Film/Shrink Film for Obtaining Distortion-Free Design

Shoko Fujii, Ruka Suzuki, Hideki Aoyama, Yukio Mori

Proceedings of CAD'17 pp.247 - 251 2017.08

Research paper (international conference proceedings), Joint Work, Accepted

STUDY ON DIGITAL STYLE DESIGN - ROBUST DESIGN SYSTEM FOR KANSEI USING MULTIVARIATE ANALYSIS AND TAGUCHI METHOD

Hideki Aoyama, Hitomi Yokoyama

Proceedings of IADIS Multi Conference on Computer Science and Information Ststems pp.10 - 18 2017.07

Research paper (international conference proceedings), Joint Work, Accepted

Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar

Nang Khin Chaw Sint, I.A. Choudhury, H.H. Masjuki, H. Aoyama

Solar Energy (The Official Journal of the International Solar Energy Society) (Elsevier) Vol. 155 pp.608 - 619 2017

Research paper (scientific journal), Joint Work, Accepted

Fuzzy-based Taguchi method for multi-response optimization of product form design in Kansei engineering: a case study on car form design

Sugoro Bhakti SUTONO,Salwa Hanim ABDUL-RASHID, Hideki AOYAMA,Zahari TAHA

Journal of Advanced Mechanical Design, Systems, and Manufacturing (The Japan Society of Mechanical Engineers) Vol.10 ( No.9 ) pp.1 - 16 2016.12

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Design Method of Optimum Assembly Processes Plan Using Assembly CAD Data

Ryo Handa, Hideki Aoyama, Noriaki Sano

Proceedings of 16th International Conference on Precision Engineering(ICPE2016) pp.1 - 5(USB) 2016.11

Research paper (international conference proceedings), Joint Work, Accepted

A Feasibility Study on Cost Effective, Ultrahigh Accuracy Angular Encoder System Based on the Principle of the effortless calibration with Multi Detecting Head

Nobuyuki ISHII, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA

Proceedings of 16th International Conference on Precision Engineering(ICPE2016) pp.1 - 5(USB) 2016.11

Research paper (international conference proceedings), Joint Work

Basic System for Process Planning and NC Program Generation to Use Turning-Milling Machine Tool with Multi-Turrets

Ririko KIYOOKA, Khusna DWIJAYANTI, and Hideki AOYAMA

Proceedings of the 19th International Symposium on Advances in Abrasive Technology (ISAAT2016) pp.295 - 299(USB) 2016.10

Research paper (international conference proceedings), Joint Work, Accepted

BURR PREDICTION DUE TO FLANK WEAR IN END-MILLING

Sothea Kruy, Hideki Aoyama

Proceedings of International Symposium on Flexible Automation 2016(ISFA2016) pp.412 - 417 2016.08

Joint Work, Accepted

Accurate Estimation of Cutting Time Based on Control Principle of Machine Tool

Kosuke Saito, Hideki Aoyama and Noriaki Sano

International Journal of Automation Technology (Fuji Technology Press Ltd.) Vol.10 ( No. 3 ) pp.429 - 437 2016.03

Research paper (scientific journal), Joint Work, Accepted

A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools

Yoshinori Ogawa, Kazuo Nakamoto, Michiharu Ota, Tomohiro Fukaya, Marc Russell, Tarek I. Zohdi, Kazuo Yamazaki, Hideki Aoyama

CIRP Annals - Manufacturing Technology (ELSEVIER) Vol.65 pp.245 - 248 2016

Research paper (scientific journal), Joint Work, Accepted

Basic Development of Dental CAD System Based on occlusion

Masahiro Itoh, Hideki Aoyama

Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 8 2015.11

Research paper (international conference proceedings), Accepted

Basic Method for Simultaneous Measurement of Enamel and Dentin Shapes of Human Teeth

Terumi Hayashi, Hideki Aoyama

Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 8 2015.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of Digital Design System for Pottery Crack Patterns

Kaoru Shimizu, Hideki Aoyama

Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 11 2015.11

Research paper (international conference proceedings), Joint Work, Accepted

Construction Method of High-quality Aesthetic Surfaces Based on Fairing Highlight Lines

Tatsuhiro Hokaike, Hideki Aoyama

Proceedings of 2015 Asian Conference on Design and Digital Engineering pp.1 - 11 2015.11

Research paper (international conference proceedings), Joint Work, Accepted

A Method for Identification of Control Parameters of NC Machine Tool and its Utilization for High-Speed Machining and Accurate Machining Time Estimation

Yuki Yamamoto, Hideki Aoyama, Noriaki Sano

Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 6 2015.10

Research paper (international conference proceedings), Joint Work, Accepted

High Efficiency Machining of Curved Surfaces Using 5 Axis Machine Tool

Satoshi YAMAGATA, Hideki AOYAMA, Noriaki SANO

Proceedings of The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.1 - 6 2015.10

Research paper (international conference proceedings), Joint Work, Accepted

Machining without Precision Arrangement of Workpiece by Automatic Recognition of Position and Attitude

Sheng-Han Hsieh, Hideki Aoyama

Proceedings of The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015) pp.1 - 7 2015.08

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　－織物デザイン支援システム－

原歩未，青山英樹

精密工学会誌 (精密工学会) Vol.81 ( No.8 ) pp.793 - 800 2015.08

Research paper (scientific journal), Joint Work, Accepted

DIGITAL DESIGN OF CRACK PATTERNS WITH NATURAL IMPRESSIONS ON POTTERY

Kaoru Shimizu, Hideki Aoyama

Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (2015) pp.1 - 6 2015.08

Research paper (international conference proceedings), Joint Work, Accepted

Tool Paths Planning under Window Framing Scheme for Burr Minimization

Sothea KRUY,Hideki AOYAMA and Noriaki SANO

Journal of the Japan Society for Precision Engineering (精密工学会) Vol.81 ( No.6 ) pp.598 - 603 2015.06

Research paper (scientific journal), Joint Work

Development of Automatic Process Planning System for Turning-Milling Center with 2 Turrets System

Khusna DWIJAYANTI, Hideki AOYAMA

Journal of the Japan Society for Precision Engineering (精密工学会) Vol.81 ( No.5 ) pp.471 - 480 2015.05

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Electrode Design for Orbiting EDM: An Experimental Approach

Tutik Sriani, Gunawan Setia Prihandana, Hideki Aoyama

Applied Mechanics and Materials (Scientific.Net) Vol.758 pp.159 - 163 2015.04

Research paper (scientific journal), Joint Work, Accepted

Current and Future Trends in 3D CAD/CAM

Hideki Aoyama

Proceedings of International Symposium on Uitlaprecision Engineering and Nanotechnology (ISUPEN) pp.9 - 12 2015.03

Research paper (international conference proceedings), Single Work, Accepted

Optimization of Control Gains in Numerical Control

Hideki Aoyama, Duo Zhang

Advanced Materials Research Vol. 806 pp.651 - 654 2015

Research paper (scientific journal), Accepted

Access to Document (DOI)

Automatic Workpiece Positioning Method for Machining Operations

Sheng-Han Hsieh, Hideki Aoyama

Proceedings of the ACDDE2014 (Asian Conference on Design & Digital Engineering 2014) 2014.10

Research paper (international conference proceedings), Joint Work, Accepted

Prediction of thickness and height of burr based on burr formation mechanisms in end milling

Sothea KRUY, Hideki AOYAMA, Kentaro OHTA, Noriaki SANO

Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.8 ( No.4 ) pp.1 - 11 2014.10

Research paper (scientific journal), Joint Work, Accepted

Access to Document (DOI)

Basic study on process planning for Turning-Milling Center based on machining feature recognition

Khusna DWIJAYANTI, Hideki AOYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.8 ( No.4 ) pp.1 - 11 2014.10

Research paper (scientific journal), Accepted

Access to Document (DOI)

Curved Surfaces Forming of Sheet Material by Laser Irradiation

Keisuke Kishida, Hideki Aoyama, Naohisa Mastushita, Akihiko Ushimaru

Advances in Abrasive Technology ⅩⅦ pp.788 - 793 2014.09

Research paper (international conference proceedings), Joint Work, Accepted

The Modular Design in Consideration of Influence of Noise

Saimon GOKYU, Hideki AOYAMA, and Toshiharu MIWA

Proceedings of The 3rd International Conference on Design Engineering and Science (ICDES2014) pp.150 - 155 2014.08

Research paper (international conference proceedings), Joint Work, Accepted

ROBUST DESIGN ON KANSEI OF PRODUCT SATISFYING EMOTION AND PREFERENCE OF TARGET CUSTOMERS USING TAGUCHI METHOD

Hideki Aoyama,Yuka Kawamura,Tetsuo Oya

Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014) pp.1 - 7 2014.08

Research paper (international conference proceedings), Joint Work, Accepted

FABRIC SIMULATION USING MEASUREMENT DATA FOR DRESS DESIGN

Ayumi Hara,Hideki Aoyama,Tetsuo Oya

Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2014) pp.1 - 8 2014.08

Research paper (international conference proceedings), Joint Work, Accepted

Fabric model for clothing design by wrinkle simulation

Ayumi Hara,Hideki Aoyama

Jounal of Mechanical Science and Technorogy 28 (Springer) Vol.28 pp.2453 - 2458 2014.07

Research paper (scientific journal), Joint Work, Accepted

GAIN OPTIMIZATION FOR HIGH SPEED AND HIGH ACCURACY CONTROL OF MACHINE TOOL

Duo Zhang,Hideki Aoyama

Proceedings of ISCIE / ASME ISFA2014 International Symposium on Flexible Automation pp.1 - 6 2014.07

Research paper (international conference proceedings), Joint Work, Accepted

DESIGN SUPPORT SYSTEM USING MASS-SPRING SIMULATION FOR VEHICLE CRASHWORTHINES

Akihiro Nakaishi,Tetsuo Oya,Hideki Aoyama

Proceedings of ISCIE / ASME ISFA2014 International Symposium on Flexible Automation pp.1 - 3 2014.07

Research paper (international conference proceedings), Joint Work, Accepted

Development of Process Planning System for Turning-Milling Center

Khusna Dwijayanti,Hideki Aoyama

Proceedings of 14th International Conference on Precision Engineering(ICPE2014) pp.548 - 553 2014.07

Research paper (international conference proceedings), Joint Work, Accepted

Development of System to Predictand Minimize of Burrs in End-Milling

SotheaKruy,HidekiAoyama,Noriaki Sano

Proceedings of 14th International Conference on Precision Engineering(ICPE2014) pp.518 - 523 2014.07

Research paper (international conference proceedings), Joint Work, Accepted

意匠デザインにおける高品質形状のための曲率単調曲線生成手法

木村文彦、大家哲朗、青山英樹

精密工学会誌 (精密工学会) Vol.80 ( No.6 ) pp.598 - 603 2014.06

Research paper (scientific journal), Joint Work, Accepted

A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with consideration of the interactions of attributes

Huu-Tho Nguyen, Siti Zawiah Md Dawal, Yusoff Nukman, Hideki Aoyama

Expert Systems with Applications Vol.41 pp.3078 - 3090 2014.05

Research paper (scientific journal), Joint Work, Accepted

デジタルスタイルデザインに関する研究－要求に印象を呈する木目模様の生成法－

秋山涼、青山英樹、大家哲朗

精密工学会誌 (精密工学会) Vol.80 ( No.5 ) pp.484 - 490 2014.05

Research paper (scientific journal), Joint Work, Accepted

Insert geometry effects on surface roughness in turning process of AISI D2 steel

Zahari TAHA, Hani-kurniati LELANA, Hideki AOYAMA, Raja Ariffin RAJA GHAZILLA, Julirose GONZALES, Novita SAKUNDARINI, Sugoro B. SUTONO

Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) pp.966 - 971 2014

Research paper (scientific journal), Joint Work, ISSN 1862-1775

Investigation on Musculoskeletal Symptoms and Ergonomic Risk Factors at Metal Stamping Industry

Mean Vathna, Nor Suliani Abdullah, Siti Zawiah Md Dawal, Hideki Aoyama and Kruy Sothea

ADVANCED ENGINEERING FORUM pp.293 - 299 2013.12

Research paper (scientific journal), Joint Work, Accepted, ISSN 2234-991X

Burr Prediction Method in End Milling

Sotea KRUY, Hideki AOYAMA, Kentaro OHTA, Noriaki SANO

Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) 2013.11

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Process Planning for Turning-Milling Center Based on Machining Feature Recognition

Kusna Dwijayanti, Hideki Aoyama

Proceedings of The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) 2013.11

Research paper (international conference proceedings), Joint Work, Accepted

Laser Forming Method for Curved Surfaces - Analysis and Experiment -

Keisuke Kishida, Hideki Aoyama, Naohisa Matsushita,Akihiko Ushimaru

Proceedings of 5th International Conference of Aisn Society for Precision Engineering and Nanotechnology(ASPEN2013) pp.1-6 2013.11

Research paper (international conference proceedings), Joint Work, Accepted

Generation of NC Program for Realizing High Speed Feed Rate and High Quality machining

Shintaro Sakurai, Hideki Aoyama, Noriaki Sano

Proceedings of 5th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2013) pp.1-6 2013.11

Research paper (international conference proceedings), Joint Work, Accepted

PRODUCTIVITY IMPROVEMENT BY USING JUST IN TIME – LINE BALANCING TECHNIQUE

Piseth Seng, Nukman Bin Yusoff, Sovanna Pan, Aoyama Hideki

Proceedings of AUN/SEED-NetRegional Conference on Mechanical and Manufacturing Engineering (AUN/SEED-NET) pp.51- - 57 2013.11

Research paper (international conference proceedings), Joint Work, Accepted

Effectiveness of Ultrasonic Vibration on Press Forming

Yutaka Ashida, Hideki Aoyama

Advances in Abrasive Technology XVI Vol.797 pp.350-355 2013.09

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　－感性言語による水玉模様デザイン創発システム－

蒲原有紀，青山英樹，大家哲朗

精密工学会誌 (精密工学会) Vol.48 ( No.9 ) pp.853 - 859 2013.09

Research paper (scientific journal), Joint Work, Accepted

STYLE DESIGN SYSTEM BASED ON HIGH-QUALITY AESTHETIC SHAPES TO SUPPORT DESIGNER’S CREATIVE ACTIVITY

Fumihiko Kimura, Tetsuo Oya, Hideki Aoyama

Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013) pp.1-8 2013.08

Research paper (international conference proceedings), Joint Work, Accepted

Robust Kansei Design Based on Taguchi Method - A case study on floral patterns-

Yuka Kawamura, Hideki Aoyama, and Tetso Oya

Proceedings of 2013 Asian Conference on Design and Digital Engineering (ACDDE2013) pp.448 - 456 2013.08

Research paper (international conference proceedings), Joint Work, Accepted

Fabric Model for Clothing Design by Wrinkle Simulation

Ayumi Hara, Hideki Aoyama and Tetsuo Oya

Proceedings of 2013 Asian Conference on Design and Digital Engineering (ACDDE2013) pp.491 - 495 2013.08

Research paper (international conference proceedings), Joint Work, Accepted

STUDY ON METHOD TO GENERATE WOOD GRAIN PATTERN REPRESENTING REQUIRED IMPRESSION

Ryo Akiyama, Takuya Mori, Hideki Aoyama, Tetsuo Oya

Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013) pp.1-10 2013.08

Research paper (international conference proceedings), Joint Work, Accepted

LOW COST MIXED REALITY SYSTEM USING PROJECTORS FOR EVALUATION OF PRODUCT DESIGN (SHAPE AND FUNCTION STRUCTURE)

Yuko Chinone, Hideki Aoyama, Tetsuo Oya

Proceedings of the ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2013) pp.1-7 2013.08

Research paper (international conference proceedings), Joint Work, Accepted

Two-way ANOVA Interaction Analysis to Evaluate Shape Impressionin PET Bottles

Khusnun Widitati, Hideki Aoyama

設計工学 (設計工学会) Vol.48 ( No.7 ) pp.335 - 343 2013.07

Research paper (scientific journal), Joint Work, Accepted

視覚において高齢者に優しい製品開発のための視覚シミュレーションシステム

山内しおり，青山英樹，大家哲朗

日本機械学会論文集（C編） (日本機械学会) Vol.79 ( No.800 ) pp. 1196 - 1203 2013.04

Research paper (scientific journal), Joint Work, Accepted

An analytical model for calculating the temperature distribution and determining the laser forming mechanism

Morgan A. Lok1, Hideki Aoyama

Proceedings of 2013ICOMM(8TH INTERNATIONAL CONFERENCE ON MICROMANUFACTURING) pp.193 - 198 2013.03

Research paper (international conference proceedings), Joint Work, Accepted

Advanced Design Support System Based on Function Features

Hideki Aoyama and Sonken Ando

Proceeding of The 5th AUN/SEED-Net Regional Conference in Mechanical and Aerospace Technology 2013.02

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Laser Forming of Curved Surfaces with Simulation

Keisuke Kishida, Toshihiko Nakamura, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru

International Journal of Automation Technology (Fuji Technology Press Ltd.,) Vol. 7 ( No. 1 ) pp. 24-29 2013.01

Research paper (scientific journal), Joint Work, Accepted, ISSN 1881-7629

Mesh Simplification Based on Feature Preservation and Distortion Avoidance for High-Quality Subdivision Surfaces

T. Oya, T. Tanamura, H. Aoyama and M. Higashi

Computer-Aided Design & Applications Vol.10 ( No.3 ) pp. 541 - 550 2013

Research paper (scientific journal), Joint Work

Selecting a CNC machine tool using the Intuitionistic Fuzzy TOPSIS approach for FMC

Nguyen Huu Tho1, Siti Zawiah Md Dawal1, Nukman Yusoff1, Farzad Tahriri1, and Hideki Aoyama

Applied Mechanics and Materials Vol. 315 pp.196 - 205 2013

Research paper (scientific journal), Joint Work, Accepted

Digital Design Method of Wood Grain Pattern Based on Kansei

Ryo Akiyama, Takuya Mori, Hideki Aoyama, Tetsuo Oya

International Journal of CAD/CAM Vol.13 ( No. 2 ) pp.13-21 2013

Research paper (scientific journal), Joint Work, Accepted

Product Evaluation Method Using Projection-Based Mixed Reality Technology

Yuko Chinone, Hideki Aoyama, Tetsuo Oya

Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) (JSME) pp. 1-6 2012.12

Research paper (international conference proceedings), Joint Work, Accepted

Taguchi Method for a Robust Design in Aesthetic (A PET Bottle Shape Case Study)

Khusnun Widiyati, Hideki Aoyama

設計工学 (日本設計工学会) Vol. 47 ( No. 12 ) pp. 587-595 2012.12

Research paper (scientific journal), Joint Work, Accepted

The Ease of Grasping to Evaluate Aesthetically Pleasing PET Bottle Design

Khusnun Widiyati, Hideki AOYAMA

Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) (JSME) pp. 1-6 2012.12

Research paper (international conference proceedings), Joint Work, Accepted

Study on Supporting Universal Designs Using Vision Simulator for Elderly Persons

Shiori YAMAUCHI, Hideki AOYAMA, Tetsuo Oya

Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) (JSME) pp. 1-6 2012.12

Research paper (international conference proceedings), Joint Work, Accepted

Digital Design Method of Wood Grain Pattern Based on Kansei

Ryo Akiyama, Takuya Mori, Hideki Aoyama, Tetsuo Oya

Proceedings of 2012 Asian Conference on Design and Digital Engineering (ACDDE2012) (JSME) pp. 1-8 2012.12

Research paper (international conference proceedings), Joint Work, Accepted

Toolpath Generation Method Based on Control Characteristics of Machine tool for High-Speed and High-Accuracy Machining

Kosuke Saito, Hideki Aoyama, Noriaki Sano

International Journal of Automation Technology (Fuji Technology Press Ltd.,) Vol. 6 ( No. 6 ) pp. 697-703 2012.11

Research paper (scientific journal), Joint Work, Accepted, ISSN 1881-7629

Die/Mold-less Forming of Sheet Materials

Hideki Aoyama, Satoshi Kishida

Proceedings of the 5th ASEAN University Network / Southeast Asia Engineering Education Development Network - Regional Conference in conjunction with the 1st Human Factors and Ergonomics Society of the Philippines Conference 2012 pp.1 - 7 2012.09

Research paper (international conference proceedings), Joint Work, ISSN 2094-0297

デジタルスタイルデザインに関する研究－ハイライト曲線に基づく意匠曲面の構築－

矢納咲子、青山英樹

精密工学会誌 (精密工学会) Vol.78 ( No.9 ) 810-816 2012.09

Research paper (scientific journal), Joint Work, Accepted

Study on Curved Surface forming by Laser

Hideki Aoyama, Keisuke Kishida, Hideki AOYAMA, Naohisa MATSUSHITA, Akihiko USHIMARU

15th International Symposium on Advances in Abrasive Technology (ISAAT 2012) 2012.09

Research paper (international conference proceedings), Joint Work, Accepted

Gripping Stability to Assess Aesthetical Shape: A PET Bottle Case Study

Khusnun Widiyati1, Hideki AOYAMA

Advanced Materials Research Vol. 566 pp 454-461 2012.09

Research paper (scientific journal), Joint Work, Accepted

EMERGENCE SYSTEM OF PATTERN DESIGN SHOWING NATURAL IMPRESSION

Yuki Kamahara, Hideki Aoyama, Tetsuo Oya

Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012) pp. 1-8 2012.08

Research paper (international conference proceedings), Joint Work, Accepted

COUPLING OF PACKAGING EFFICIENCY AND AESTHETIC SHAPES FOR PET BOTTLES

Khusnun Widiyati, Hideki Aoyama

Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012) pp. 1-8 2012.08

Research paper (international conference proceedings), Joint Work, Accepted

STYLE DESIGN SYSTEM BASED ON CLASS A BE´ ZIER CURVES FOR HIGH-QUALITY AESTHETIC SHAPES

Tetsuo Oya, Fumihiko Kimura, Hideki Aoyama

Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2012) pp.1-9 2012.08

Research paper (international conference proceedings), Joint Work, Accepted

CAD System for Utilizing Design Information and Know-how Based on Function Features

Sonken Ando, Hideki Aoyama, Noriaki Sano

Proceedings of the ASME/ISCIE 2012 International Symposium on Flexible Automation (ISFA 2012) (ASME) pp.1-6 2012.06

Research paper (international conference proceedings), Joint Work, Accepted

Estimation System of Accurate Cutting Time Based on Actual Feedrate Identification

Kosuke Saito, Hideki Aoyama, and Noriaki Sano

Key Engineering Materials Vol.516 pp.113-118 2012.06

Research paper (scientific journal), Joint Work, Accepted

Determination Method of Locations and Postures of Cutting Tool for 5-Axis Machining Based on Intuition and Minimum Cusp Height

Hideki Aoyama, Yumiko Suzuki, Noriaki Sano

Key Engineering Materials Vol. 516 pp. 96-101 2012.06

Research paper (scientific journal), Joint Work, Accepted

Die and Mold-less Forming of Sheet Materials –Curved Surface Forming by Laser Irradiation-

Hideki Aoyama, Satoshi Kishida

ASEAN Engineering Journal Part A (AUN/SEED-Net) Vol. 2 ( No. 1 ) pp. 5-11 2012.06

Research paper (scientific journal), Joint Work, Accepted

Mesh Simplification Based on Feature Preservation and Distortion Avoidance for High-Quality Subdivision Surfaces

Tetsuo Oya, Toshiyuki Tanamura, Hideki Aoyama, Masatake Higashi

Proceedings of International CAD Conference and Exhibition 2012.06

Research paper (international conference proceedings), Joint Work, Accepted

工作機械の制御原理に基づく送り速度と加工精度向上のための工具経路生成法

斎藤洸輔，青山英樹，佐野記章

日本機械学会論文集（Ｃ編） (日本機械学会) Vol.78 ( No.786 ) pp.302 - 310 2012.02

Research paper (scientific journal), Joint Work, Accepted

Application of Robust Design Approach for Design Parameterization in Kansei Engineering

Suguro Bhakti Sutono, Zahari Taha, Salwa Hanim Abdul Rashd, Hideki Aoyama, Subagyo

Advanced Materials Research Vols.479-481 pp.1670 - 1680 2012.02

Research paper (scientific journal), Joint Work, Accepted

製品価値フロー分析を用いた開発リスクを伴う製品開発プロセスの評価方法

三輪俊晴，青山英樹

日本機械学会論文集(C編) (日本機械学会) Vol.78 ( No.785 ) pp.312 - 326 2012.01

Research paper (scientific journal), Joint Work, Accepted

Design Support Method Based on Analysis of Shape Impression

HITOMI Yokoyama, HIDEKI Aoyama

CADDM Vol.21 ( No.2 ) pp.25 - 31 2012

Research paper (scientific journal), Joint Work, Accepted

Design Support Method Based on Analysis of Shape Impression

HITOMI Yokoyama, HIDEKI Aoyama

CADDM Vol. 21 ( No. 2 ) pp. 25-31 2012

Research paper (scientific journal), Joint Work, Accepted

Method to Decide Paths and Postures of Flat End Mill for 5-Axis Control Machining Based on Minimum Cusp Height

Tatsuya Hokkyo1, Hideki Aoyama, Noriaki Sano

Key Engineering Materials Vols. 523-524 pp. 380-385 2012

Research paper (international conference proceedings), Joint Work, Accepted

Generation of NC Program for Realizing High Speed Feed Rate of Cutting Tool

Shintaro Sakurai1, Hideki Aoyama, Noriaki Sano

Key Engineering Materials Vols. 523-524 pp. 398-403 2012

Research paper (international conference proceedings), Joint Work, Accepted

Automatic Reverse Engineering Based on Reconstructing Measurement Data in 3D-Lattice

Kiyomoto Tsushima1, Hideki Aoyama

Key Engineering Materials Vols. 523-524 pp. 414-419 2012

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Laser Forming Method for Curved Surfaces

Kishida Keisuke1, Toshihiko Nakamura1, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru

Key Engineering Materials Vols. 523-524 pp. 995-1000 2012

Research paper (international conference proceedings), Joint Work, Accepted

Advanced Design Support System Based on Function Features

Hideki Aoyama and Sonken Ando

The 5th AUN/SEED-Net Regional Conference in Mechanical and Aerospace Technology 2012

Research paper (international conference proceedings), Joint Work, Accepted

Estimation System of Accurate Cutting Time Based on Actual Feedrate Identification

Kosuke Saito, Hideki Aoyama, and Noriaki Sano

Proceeding of Asian Symposium for Precision Engineering and Nanotechnology 2011(ASPEN2011) (JSPE,KSPE,CMES,CPMS) 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

A Robust Design Approach To Enhance The Aesthetic Quality Of A Product Design:A PET Bottle Shape Case Study

Khusnun Widiyati, Hideki AOYAMA

Proceeding of the 4th International Product Design and Development in conjunction with the 4th AUN/SEED-Net Regional Conference of Manufacture (AUN/SEED-Net) pp.1 - 6 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

Sustainable Manufacturing: A Framework of Cultural Aspects for Sustainable Product Design

Ihwan Ghazali, Salwa Hanim Abdul Rashid, Siti Zawiah Md Dawal, Alva Edy Tontowi, Hideki Aoyama

Proceeding of the 4th International Product Design and Development in conjunction with the 4th AUN/SEED-Net Regional Conference of Manufacture (AUN/SEED-Net) pp.1 - 8 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

RCM Applications in Different Industries: A Comparative Study

Rahayu Khasanah, Siti Zawiah Md. Dawal, Jamasri, Hideki Aoyama

Proceeding of the 4th International Product Design and Development in conjunction with the 4th AUN/SEED-Net Regional Conference of Manufacture (AUN/SEED-Net) pp.1 - 4 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

Novel Methods for Machining of Curved Surfaces (Invited Paper)

Hideki Aoyama, Kosuke Saito, Tatsuya Hokkyo

Proceeding of the 4th International Product Design and Development in conjunction with the 4th AUN/SEED-Net Regional Conference of Manufacture (AUN/SEED-Net) pp.1 - 8 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

NC Data Generation Method for High Speed and High Accuracy Machining Taking into Consideration Control Characteristics of Machine Tool

Kosuke SAITO, Hideki AOYAMA and Noriaki SANO

Proceedings of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.1 - 6 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of System to Predict Burr in Endmilling

Kentaro OHTA, Hideki AOYAMA, Noriaki SANO

Proceedings of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.1 - 4 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

Sheet Material Forming without Dies

Toshihiko NAKAMURA, Hideki AOYAMA, Naohisa MATSUSHITA, Akihiko USHIMARU

Proceedings of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.1 - 4 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　－デザイナのアイディアと消費者の嗜好に基づく多様デザイン創発－

大嶋健太郎，青山英樹

精密工学会誌 (精密工学会) Vol.77 ( No.11 ) pp.1057 - 1062 2011.11

Research paper (scientific journal), Joint Work, Accepted

Determination Method of Locations and Postures of Cutting Tool for 5-Axis Machining Based onIntuition and Minimum Cusp Height

Hideki Aoyama, Yumiko Suzuki, and Noriaki Sano

Proceeding of Asian Symposium for Precision Engineering and Nanotechnology 2011(ASPEN2011) (JSPE,KSPE,CMES,CPMS) 2011.11

Research paper (international conference proceedings), Joint Work, Accepted

不確実性を考慮した製品価値フロー分析を用いた製品モジュール化手法の開発

三輪俊晴，青山英樹

日本機械学会論文集（C 編） (日本機械学会) Vol.77 ( No.782 ) pp.384 - 395 2011.10

Research paper (scientific journal), Joint Work, Accepted

Derivation of Electrode Design Concept in CAD Based Inverse Minkowski Sum principle

Tutik Sriani, Gunawan Setia Prihandana, Hideki Aoyama

Proceedings of Industrial Engineering and Service Science (IESS2011) 2011.09

Research paper (international conference proceedings), Joint Work, Accepted

Study on Simulation of Elderly Person’s Vision for Universal Design

Shiori Yamauchi, Hideki Aoyama

Regular Papers of Asian Conference on Design and Digital Engineering (Shanghai, China) pp.60 - 65 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

Design Support Method Based on Analysis of Shape Impression

Hitomi Yokoyama, Hideki Aoyama

Regular Papers of Asian Conference on Design and Digital Engineering pp.60 - 65 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

Design Impression Analysis Based on Positioning and Coloring of Design Elements

Naoki Okamura, Hideki Aoyama

Regular Papers of Asian Conference on Design and Digital Engineering pp.54 - 59 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

A STUDY OF KANSEI ENGINEERING IN PET BOTTLE SILHOUETTE

Khusnun Widiyati, Hideki AOYAMA

Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE) (ASME) pp.1 - 10 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

REVERSE ENGINEERING SYSTEM BASED ON UNIFORMING MEASUREMENT DATA IN 3DLATTICE

Gaku Shibata, Hideki Aoyama, Megumi Sato

Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE) (ASME) pp.1 - 9 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

DEVELOPMENT OF SYSTEM FOR HIGH QUALITY WOOD GRAIN DESIGN

Takuya Mori, Satoshi Shibasaki, Hideki Aoyama

Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE) (ASME) pp.1 - 9 2011.08

Research paper (international conference proceedings), Joint Work, Accepted

Novel Electrode Design Method for Orbiting Electrical Discharge Machining

Hideki Aoyama, Tutik Sriani

ASEAN Engineering Journal (Manufacturing Engineering Mechanical and Aeronautical Engineering) Vol.1 ( No.1 ) pp.14 - 24 2011.07

Research paper (scientific journal), Joint Work, Accepted

DESIGN CREATION SYSTEM BASED ON DESIGNER’S KANSEI AND CONSUMER’S PREFERENCE

Hideki Aoyama, Kentaro Ohshima

PROCEEDINGS OF THE IADIS INTERNATIONAL CONFERENCE -INTERFACES AND HUMAN COMPUTER INTERACTION 2011- (IADIS) pp.241 - 248 2011.07

Research paper (international conference proceedings), Joint Work, Accepted

VIRTUAL CLAY MODELING SYSTEM BASED ON AESTHETIC CURVES

Hideki Aoyama, Hiroshige Kai

Proceedings of the ASME 2011 World Conference on Innovative Virtual Reality WINVR2011 (ASME) pp.1 - 6 2011.06

Research paper (international conference proceedings), Joint Work, Accepted

洗面ボール形状と人の感性の関係分析によるデザイン支援方法の構築

橋田規子, 小暮真弥子, 青山英樹

デザイン学研究（日本デザイン学会誌） (日本デザイン学会) Vol.57 ( No.6 ) pp.1 - 8 2011.06

Research paper (scientific journal), Joint Work, Accepted

Intelligent CAD Tool to Solve Challenges in the Design of Orbiting EDM Electrode

T. Sriani, H. Aoyama

SAE International Congress Vol.4 pp.166 - 173 2011.04

Research paper (scientific journal), Joint Work, Accepted

Intelligent CAD Tool to Solve Challenge in the Design Orbiting EDM Electrode

Tutik Sriani, Hideki Aoyama

SAE International Journal of Passenger Cars- Electronic and Electrical Systems Vol.4 ( Issue 1 ) 166-173 2011.04

Research paper (international conference proceedings), Joint Work, Accepted

Design Principle and Automation of Tool for Orbiting Micro-Electrical Discharge Machining

T. Sriani, H. Aoyama

Proceedings of the 6th International Conference on MicroManufacturing (ICOMM2011) (JSPE,JSAT,JSME,JSTP) pp.443 - 448 2011.03

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Development of CAM system for High Speed Motion and Small Fluctuation of Feedrate and Acceleration

Kosuke Saito, Hideki Aoyama, Noriaki Sano

Proceedings of the 6th International Conference on MicroManufacturing (ICOMM2011) (JSPE,JSAT,JSME,JSTP) pp.437 - 441 2011.03

Research paper (international conference proceedings), Joint Work, Accepted

Development of Brick from Paper, Composite Wood and Plastic Waste Material

Kruy Sothea, M. Hamdi, Hideki Aoyama

Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems Conference 2010 (APIEMS) pp1 - 6 2010.12

Research paper (international conference proceedings), Joint Work, Accepted

Insert geometry effects on surface roughness in turning process of AISI D2 steel

Zahari TAHA, Hani-kurniati LELANA, Hideki AOYAMA, Raja Ariffin RAJA GHAZILLA, Julios GONZALES, Novita SAKUNDARINI, Suguro B.SUTONO

Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) (Springer) Vol.11 ( No.12 ) pp.966 - 971 2010.12

Research paper (scientific journal), Joint Work, Accepted, ISSN 1862-1775

CAD Automaton of Electrode Design for Orbiting EDM

Tutik Sriani, Hideki Aoyama

Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems Conference 2010 (APIEM2010) (APIEMS) pp.1 - 7 2010.12

Research paper (international conference proceedings), Joint Work, Accepted

Electrode Design Automation of Orbiting Electrical Discharge Machining (EDM)

Tutik Sriani, Hideki Aoyama

Proceedings of the 14th International Conference on Mechatronics Technology (ICMT 2010) pp.1 - 6 2010.11

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　―木目模様デザインシステムの開発―

柴崎慧, 青山英樹

精密工学会誌 (精密工学会) Vol.76 ( No.11 ) pp.1293 - 1298 2010.11

Research paper (scientific journal), Joint Work, Accepted

Development of Surface Refining System Using Highlight Lines

Hideki Aoyama, Yusuke Komatsu

Proceedings of the 2nd International Conference on Design Engineering and Science (ICDES2010) (JSDE) pp.324 - 329 2010.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of a Crush and Mix Machine for Composite Brick Fabrication

Kruy Sothea, Nik Fazil, M. Hamdi, Hideki Aoyama

AIP Conference Proceedings Volume 1315 (INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010)) pp.1437 - 1442 2010.10

Research paper (international conference proceedings), Joint Work, Accepted

Study on Virtual Clay Modeling System Using Refined Curves in Technological Aspect

Hiroshige Kai, Hideki Aoyama

Proceedings of IDMME-Virtual Concept 2010 (AIP-Primeca) 1-6 2010.10

Research paper (international conference proceedings), Joint Work, Accepted

Development of System to Support and Evaluate Chair Design

Hideki Aoyama, Kengo Nieda, Mio Matsumoto

Proceedings of IDMME-Virtual Concept 2010 (AIP-Primeca) 1-6 2010.10

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Development of CAM System for Laser Forming

Shotaro ISHIHARA, Toshihiko NAKAMURA, Hideki AOYAMA, Naohisa MATSUSHITA, Akihiro USHIMARU

Proceedings of 4th CIRP International Conference on High Performance Cutting (CIRP) pp.159 - 164 2010.10

Research paper (international conference proceedings), Joint Work, Accepted

Development of CAD System Based on Function Features

Sonken Ando, Ryo Ikeda, Hideki Aoyama, Norihito Hiruma

Key Engineering Materials Vols.447-448 442-446 2010.09

Research paper (scientific journal), Joint Work, Accepted

Evaluation System of Designability and Operability of Product Using Mixed Reality Technology

Hideki Aoyama, Yu Kimishima

Proceedings of Asian Conference on Design and Digital Engineering 695-696 2010.08

Research paper (international conference proceedings), Joint Work, Accepted

DESIGN EMERGING SYSTEM BY APPLYING CONSUMER’S PREFERENCE TO DESIGNER’S IDEA

Kentarou Ohshima，Hideki Aoyama

Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010) (ASME) 1-10 2010.08

Research paper (international conference proceedings), Joint Work, Accepted

SYSTEM FOR 3D FORM GENERATION AND IMPRESSION ANALYSIS BASED ON EMOTIONAL WORDS: “KANSEI WORDS”

Hideki AOYAMA, Shigeto MIYAUCHI

Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010) (ASME) 1-7 2010.08

Research paper (international conference proceedings), Joint Work, Accepted

Modeling Method of Aesthetic Shape Based on Refined Curves

Hiroshige Kai, Hideki Aoyama

Proceedings of Asian Conference on Design and Digital Engineering 655-656 2010.08

Research paper (international conference proceedings), Joint Work, Accepted

A STUDY ON COMPENSATION OF ORBITAL MOTION TO THE ELECTRODE DESIGN OF ORBITING ELECTRICAL DISCHARGE MACHINING (EDM)

Tutik Sriani, Yuuki Nakamura, Hideki Aoyama

Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) (ISCIE,ASME) 1-7 2010.07

Research paper (international conference proceedings), Joint Work, Accepted

Novel Tool Design Method for Orbiting EDM -A 2nd Approach on Design Automation Development in CAD –

Tutik SRIANI, Hideki AOYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.4 ( No.7 ) 1261-1271 2010.07

Research paper (scientific journal), Joint Work, Accepted

CONSTRUCTION OF 3D CAD MODELS FROM ROUGH SKETCHES

Shota Fukuchi, Hideki Aoyama, Norihito Hiruma

Proceedings of 2010 ISFA (2010 International Symposium on Flexible Automation) (ISCIE,ASME) 1-7 2010.07

Research paper (international conference proceedings), Joint Work, Accepted

System to Intuitively and Interactively Determine Tool Paths and Tool Postures Using Haptic Device

Yumiko Suzuki, Steven Dreier, Hideki Aoyama, and Noriaki Sano

Proceedings of CIRP 2nd International Conference on Process Machine Interactions (CIRP) 1-11 2010.06

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　―木目模様デザインのための基本システムの開発―

柴崎慧, 青山英樹

精密工学会誌 (精密工学会) Vol.76 ( No.6 ) 840-845 2010.06

Research paper (scientific journal), Joint Work, Accepted

Novel Tool Design Method for Orbiting Electrical Discharge Maching

Tutik SRIANI, Yuki NAKAMURA, Hideki AOYAMA

Journal of Advanced Mechanical Design, Systems, and Manufacturing Vol.4 ( No.6 ) pp.1182 - 1191 2010.06

Research paper (scientific journal), Joint Work, Accepted

Basic Study on Laser Forming CAM System for Sheet Material Forming Without Dies or Molds

Toshihiko Nakamura, Shotaro Ishihara, Hideki Aoyama, Naohisa Matsushita, Akihiko Ushimaru

International Journal of Automation Technology Vol.4 ( No.5 ) 447-453 2010.05

Research paper (scientific journal), Joint Work, Accepted

Efficient Design Method Based on Evaluation Using CAE System

Yuta SAWAI, Hideki AOYAMA

Journal of Advanced Mechanical Design, System, and Manufacturing Vol.4 ( No.5 ) 827-830 2010.05

Research paper (scientific journal), Joint Work, Accepted

LINKAGE OF POWER CONSUMPTION TO DESIGN FEATURE ON TURNING PROCESS

ZAHARI TAHA, HANI KURNIATI, HIDEKI AOYAMA, RAJA ARIFFIN GHAZILLA, JULIROSE GONZALES, NOVITA SAKUNDARINI

10th WSEAS Int. Conf. on ROBOTICS, CONTROL and MANUFACTURING TECHNOLOGY (ROCOM10)(ROCOM'10) pp.74 - 78 2010.04

Research paper (international conference proceedings), Joint Work, Accepted, ISSN 1790-5117

Toolmaking Simulation on Orbiting EDM for Freeform Surface

Tutik Sriani, Tuuki Nakamura, Hideki Aoyama

Proceedings of The 2nd SEEAN University Network/ Southeast Asia Enginnering Education Development Network Regional Conference on Manufacturing Engineering 2009 A59-A64 2009.12

Research paper (international conference proceedings), Joint Work, Accepted

Efficient Design Method Based on Evaluation Using CAE System

Yuta Sawai, Hideki Aoyama

Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.257 - 262 2009.12

Research paper (international conference proceedings), Joint Work, Accepted

Reverse Engineering System for Functional Parts with Complex Shape

Megumi Sato, Hideki Aoyama

Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.263 - 266 2009.12

Research paper (international conference proceedings), Joint Work, Accepted

A Novel Method for Fabrication of Die and Mold in Orbiting Electrical Discharge Machining-Proposition of Electrode Design

Tutik Sriani, Yuki Nakamura, Hideki Aoyama

Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.809 - 814 2009.12

Research paper (international conference proceedings), Joint Work, Accepted

Current Situation and Future Prospects of CAD/CAM Systems

Hideki Aoyama

Proceedings of The 2nd SEEAN University Network/ Southeast Asia Enginnering Education Development Network Regional Conference on Manufacturing Engineering 2009 pp.B9 - B14 2009.12

Research paper (international conference proceedings), Single Work, Accepted

Electrode Design for Oscillating EDM

Yuki Nakamura, Tutik Sriani, Hideki Aoyama

Advanced in Abrasive Technology XII (The 12the International Symposium on Advanced in Abrasive Technology (ISAAT2009)) (ASTS) pp.645 - 650 2009.09

Research paper (international conference proceedings), Joint Work, Accepted

Electrode Design for Oscillating EDM

Yuki Nakamura, Tutik Sriani, Hideki Aoyama

Advanced Material Research Vol.76-78 pp.645 - 650 2009.09

Research paper (scientific journal), Joint Work, Accepted

COMPUTER AIDED STYLE DESIGN SYSTEM BASED ON HIGHLIGHT LINES

Sakiko Yano, Hideki Aoyama

Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), (2009 International Design Engineering Technical Conference) (ASME) pp.1 - 9 2009.08

Research paper (international conference proceedings), Joint Work, Accepted

PRODUCT FUNCTION – COMPONENT MODELING USING ROUGH SETS

Toshiharu Miwa, Hideki Aoyama

Research paper (international conference proceedings), Joint Work, Accepted

DEVELOPMENT OF WOOD GRAIN PATTERN DESIGN SYSTEM

Satoshi Shibasaki, Hideki Aoyama

Research paper (international conference proceedings), Joint Work, Accepted

Collaboration Design System Using Internet and Virtual Reality Technology

Hideki Aoyama

13th International Conference on Human-Computer Interaction (HCI 2009 International) pp.513 - 521 2009.07

Research paper (international conference proceedings), Single Work, Accepted

デジタルスタイルデザインに関する研究　－シボ（テクスチャ）デザインシステムの開発－

青山英樹, 中塚暁志

精密工学会誌 (精密工学会) Vol.75 ( No.7 ) pp.847 - 852 2009.07

Research paper (scientific journal), Joint Work, Accepted

ボールエンドミル切れ刃の摩耗予測に関する研究

宋哲源, 青山英樹

砥粒加工学会誌 (砥粒加工学会) Vol.53 ( No.6 ) pp.373 - 378 2009.06

Research paper (scientific journal), Joint Work, Accepted

Mixed reality system for evaluating designability and operability of information appliances

Hideki Aoyama, Yu Kimishima

International Journal on Interactive Design and Manufacturing (IJIDM) Vol.3 ( No.3 ) pp.157 - 164 2009.03

Research paper (scientific journal), Joint Work, Accepted

ボールエンドミル摩耗分布予測システムの開発

宋哲源, 青山英樹

砥粒加工学会誌 (砥粒加工学会) Vol.53 ( No.3 ) pp.162 - 167 2009.03

Research paper (scientific journal), Joint Work, Accepted

Current States and Future Development on CAD/CAM

Hideki Aoyama

AUN/SEED-Net 1st Regional Conference in Manufacturing Engineering (AUN/SEED-Net) pp.1 - 6 2008.11

Research paper (international conference proceedings), Single Work, Accepted

Mixed Reality System for Evaluating Designability and Operability of Information Appliance

Hideki Aoyama, Yu Kimishima

Proceedings of IDMME –Virtual Concept 2008- (AIP-Primeca) pp.1 - 8 2008.10

Research paper (international conference proceedings), Joint Work, Accepted

BASIC STUDY ON TREND PREDICTION FOR STYLE DESIGN

Shinya Yoshida, Hideki Aoyama

Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2008 (ASME) pp.1 - 8 2008.08

Research paper (international conference proceedings), Joint Work, Accepted

PROBABILISTIC EVALUATION OF PRODUCT DEVELOPMENT TASK PLANNING USING WORTH FLOW ANALYSIS

Toshiharu Miwa, Hideki Aoyama

Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2008 (ASME) pp.1 - 9 2008.08

Research paper (international conference proceedings), Joint Work, Accepted

BASIC STUDY ON PARAMETERS TO QUANTITATIVELY EVALUATE SHAPE IMPRESSION

Keiji Takeda, Hideki Aoyama

Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2008 (ASME) pp.1 - 8 2008.08

Research paper (international conference proceedings), Joint Work, Accepted

Problems in CAD/CAM and Technology Trend and Design Aid Based on the Function Feature

Hideki Aoyama

Proceedings of 2nd Thailand-Japan Die and Mould Technology Symposium pp.113 - 145 2008.06

Research paper (international conference proceedings), Single Work, Accepted

DESIGN SUPPORT SYSTEM USING INTERNET AND VIRTUAL REALITY TECHNOLOGY FOR REMOTE COLLABORATION

Rie Iida, Hideki Aoyama

Proceedings of ASME 2008 International Symposium on Flexible Automation (ASME) (Paper JS008)pp. 1 - 4 2008.06

Research paper (international conference proceedings), Joint Work, Accepted

Development of CAM system to estimate tool wear of ball-end-milling

CheoiWon Song, Hideki Aoyama

Manufacturing Systems and Technologies for the New Frontier (The 41th CIRP Conference on Manufacturing Systems) (CIRP,JSPE) pp.409 - 412 2008.05

Research paper (international conference proceedings), Joint Work, Accepted

Design Evaluation System Using Mixed Reality Technology

Hideki Aoyama

11th AUN/SEED-Net Field Wise Seminar for Manufacturing Engineering (AUN/SEED-Net) 2007.12

Research paper (international conference proceedings), Single Work, Accepted

Basic Study on Development of System to Determine Machining Conditions for Minimizing Energy Consumed in Machine Tool

Yuki ARAKAWA, Hideki AOYAMA

Proceedings of the 4th International Conference on Leading Edge manufacturing in 21st Century (LEM21) (JSME) pp.263 - 266 2007.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of Basic System to Construct Database of Machining Know-how

Yusuke UCHIDA, Hideki AOYAMA

Proceedings of the 4th International Conference on Leading Edge manufacturing in 21st Century (LEM21) (JSME) pp.251 - 256 2007.11

Research paper (international conference proceedings), Joint Work, Accepted

VIRTUAL STUDIO SYSTEM AND FACIAL EMOTION-EXPRESSIONASME

Hideki AOYAMA

Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2007) (ASME) pp.1 - 10 2007.09

Research paper (international conference proceedings), Single Work, Accepted

DEVELOPMENT OF TEXTURE DESIGN SYSTEM USING FRACTAL AND 1/f FLUCTUATION

Satoshi Nakatsuka, Hideki AOYAMA

Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2007) (ASME) pp.1 - -8 2007.09

Research paper (international conference proceedings), Joint Work, Accepted

DEVELOPMENT OF ADVANCED CAD/CAM SYSTEM USING “FUNCTION FEATURE”

Ryo Ikeda, Hideki Aoyama

Proceedings of the 8th International Conference on Computer-aided Design & Conceptual Design (GIST) pp.1 - 6 2007.08

Research paper (international conference proceedings), Single Work, Accepted

DEVELOPMENT OF 3D MODELING SYSTEM BASED ON SKETCH

Ryota Ikeda, Hideki Aoyama

Proceedings of the 8th International Conference on Computer-aided Design & Conceptual Design (GIST) pp.1 - 6 2007.08

Research paper (international conference proceedings), Joint Work, Accepted

OPERABILITY EVALUATION AND INTERFACE DESIGN OF 3D CAD SYSTEM

Naohiro Negishi, Hideki Aoyama

Proceedings of the 8th International Conference on Computer-aided Design & Conceptual Design (GIST) pp.1 - 6 2007.08

Research paper (international conference proceedings), Joint Work, Accepted

Sketch Based Modeling System

Hideki Aoyama, Hiroki Yamaguchi

Proceedings and Posters of 12th International Conference, HCI International 2007 with 8 Future Associate Conferences pp.421 - 430 2007.07

Research paper (international conference proceedings), Joint Work, Accepted

Mesh-based 3D-design Spaces for Complex Shapes in Kansei Engineering

Nordgren A. and Aoyama H.

Proceedings 1st European Conference on Affective Design and Kansei Engineering pp.1 - 8 2007.06

Research paper (international conference proceedings), Joint Work, Accepted

Press forming using ultrasonic vibration

Y. Ashida, H. Aoyama

Journal of Materials Processing Technology Vol.187-188 pp.118 - 122 2007.06

Research paper (scientific journal), Joint Work, Accepted

Implicit Shape Parameterization for Kansei Design

Andreas Nordgren,Hideki Aoyama

Journal of Advanced Mechanical Design, Systems and Manufacturing Vol.1 ( No.4 ) pp.442 - 452 2007.04

Research paper (scientific journal), Joint Work, Accepted

Digital Style Design Systems to Model Sophisticated Shape from Concept

Hideki Aoyama

9th AUN/SEED-Net Field Wise Seminar on Manufacturing Engineering (AUN/SEED-Net) 2007.03

Research paper (international conference proceedings), Single Work, Accepted

Digital style design systems from concept to sophisticated shape

Hideki Aoyama, Andreas Nordgren, Hiroki Yamaguchi, Yusuke Komatsu, Mai Ohno

International Journal on Interactive Design and Manufacturing Vol.1 ( No.2 ) pp.55 - 65 2007.02

Research paper (scientific journal), Joint Work, Accepted

EvokeDB –A Kansei Database System for Automated Surveys

Andreas Nordgren,Hideki Aoyama

Kansei Engineering International Vol.7 ( No.1 ) pp.1 - 10 2007.01

Research paper (scientific journal), Joint Work, Accepted

Sketch Based Modeling System

Hideki Aoyama, Hiroyuki Yamaguchi

LNCS (Lecture Notes in Computer Science) Vol. 4563/2007 pp. 421-430 2007

Research paper (scientific journal), Joint Work, Accepted

“Trends and possibility of Japanese industry” and “System to construct database of skilled machining-worker’s know-how”

Hideki Aoyama

Proceedings of AUN/SEED-Net (8th Field Wise Seminar on Manufacturing Engineering (AUN/SEED-Net) pp.1 - 6 2006.12

Research paper (international conference proceedings), Single Work, Accepted

Development of System Using Mixed Reality Technology for Evaluating Designability and Operability of Product

Hideki Aoyama, Yu Kimishima

Workshop Proposal of Virtual Concept 2006 -Possibility of applying Virtual Reality and Mixed Reality to the Human Centered Design and Prototyping for Information Appliances- (AIP-Primeca) pp.44 - 51 2006.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of Sketching Support System

Hiroki Yamaguchi, Hideki Aoyama

2006 Design Research Society International Conference (DRS) 2006.11

Research paper (international conference proceedings), Joint Work, Accepted

Characteristic Line Modeling in Interactive Design

Mai Ohno, Hideki Aoyama

Proceedings of Virtual Concept 2006 (AIP-Primeca) pp.1 - 10 2006.11

Research paper (international conference proceedings), Joint Work, Accepted

Digital Style Design Systems –From Concept tp Sophisticated Shape-

Hideki Aoyama, Andreas Nordgren, Hiroki Yamaguch, Yusuke Komatsu, and Mai Ohno

Proceedings of Virtual Concept 2006 (AIP-Primeca) pp.1 - 10 2006.11

Research paper (international conference proceedings), Joint Work, Accepted

DEVELOPMENT OF EVALUATION SYSTEM FOR STYLE DESIGN USING MIXED REALITY TECHNOLOGY (DETC2006-99331)

Yu Kimishima, Hideki Aoyama

Proceedings of IDETC/CIE 2006 ASME 2006 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (ASME) pp.1 - 8 2006.09

Research paper (international conference proceedings), Joint Work, Accepted

Press Forming Using Ultrasonic Vibration

Yutaka Ashida, Hideki Aoyama

Proceedings of the Third International Conference on Advanced Forming and Die Manufacturing Technology (AFDM2006) (KSTP) (CD-ROM) 2006.09

Research paper (international conference proceedings), Joint Work, Accepted

A Study on the Discrepancies of Kansei Data for Representations of Complex Artifacts

Andreas Nordgren, Hideki Aoyama

Proceedings of the First International Conference on Kansei Engineering & Intelligent System (KEIS06) pp.111 - 116(S301) 2006.09

Research paper (international conference proceedings), Joint Work, Accepted

“Situations and Trends” of Japanese Industry and “Directions and Possibilities” of Industrial Strategy

Hideki Aoyama

Proceedings of IMS Vision Forum 2006 (IMS) pp.48 - 56 2006.04

Research paper (international conference proceedings), Single Work, Accepted

Sensor Fusion Strategy in the Monitoring of Cutting Tool Wear

Muslim Mahardika1, Zahari Taha1, Djoko Suharto, Kimiyuki Mitsui, Hideki Aoyama

Key Engineering Materials (Trans Tech Publications,Switzerland) Vols.306-308 pp.727 - 732 2006.03

Research paper (scientific journal), Joint Work, Accepted

Estimation of Cutting Distribution for Prediction of Cutting Tool Wear in Ball End Milling

Cheol-Won Song, Takahiko Teramoto, Hideki Aoyama

Proceedings of IJCC Workshop 2006 on Digital Engineering pp.87 - 91 2006.02

Research paper (international conference proceedings), Joint Work, Accepted

Identification System of Machining Error Based on Analysis of Machined Shape

Yusuke Hosomi, Hideki Aoyama

Journal of Machine Engineering Vol. 6 ( No. 2 ) pp.116 - 123 2006.02

Research paper (scientific journal), Single Work, Accepted

3D modeling system based on line sketch

Takashi Hirayama, Hideki Aoyama

Proceedings of Virtual Concept 2005 (AIP-Priméca) pp.1 - 6 2005.11

Research paper (international conference proceedings), Joint Work, Accepted

Digital Style Design -Automatic Construction of Mathematical Models from Real Model-

Taro Nakasato, Hideki Aoyama

Proceedings of International Design Congress (IASDR 2005) (中国デザイン研究会(CID)) pp.1 - 13 2005.11

Research paper (international conference proceedings), Joint Work, Accepted

Digital Style Design -CAD System to Create Surfaces by Highlight Lines-

Yusuke Komatsu, Hideki Aoyama

Proceedings of International Design Congress (IASDR 2005) (中国デザイン研究会(CID)) pp.1 - 15 2005.11

Research paper (international conference proceedings), Joint Work, Accepted

CAD System to Create Surfaces with Characteristic Lines

Mai Ohno, Hideki Aoyama

Proceedings of The 1st International Conference on Design Engineering and Science (ICDES2005) (JSDE) pp.205 - 210 2005.10

Research paper (international conference proceedings), Joint Work, Accepted

Database Construction System of Cutting Techniques and Cutting Conditions Based on Skilled Worker’s Operations and NC Data

Kengo Nieda, Hideki Aoyama

Proceedings of The Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.67 - 72 2005.10

Research paper (international conference proceedings), Joint Work, Accepted

Identification System of Machining Errors Based on Analysis of Machined Shape

Yusuke Hosomi, Hideki Aoyama

Proceedings of The Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21) (JSME) pp.63 - 66 2005.10

Research paper (international conference proceedings), Joint Work, Accepted

STYLE DESIGN METHOD BASED ON FORM IMPRESSIONS

Andreas Nordgren, Hideki Aoyama

Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (ASME) pp.1 - 8 2005.09

Research paper (international conference proceedings), Joint Work, Accepted

意匠デザインのためのスケッチ支援システムの開発基礎研究

山口大貴，青山英樹

第12回「精密工学会　学生会員卒業研究発表講演会論文集」 pp.25-26 2005.03

Research paper (other academic), Joint Work

Optimization of Feed-Rate of Cutting Tool and Fixturing Forces for Workpiece Based on Estimation of Cutting Force

Yusuke Hosomi, Hideki Aoyama, Shinji Iwata

Digital Design Workshop (5th Japan-Korea CAD/CAM Workshop) pp.179 - 184 2005.02

Research paper (international conference proceedings), Joint Work, Accepted

Development of Remodeling System by Highlight Lines

Hideki Aoyama, Terukazu Ogoshi

Proceedings of FUTUREGROUND (CD-ROM) 2004.11

Research paper (international conference proceedings), Joint Work, Accepted

Construction of Basic Shape with Character Lines for Car Body Design by Image Language (Kansei Language)

Hideki Aoyama, Shigeto Miyauchi, Yoshihisa Sakai

Proceedings of FUTUREGROUND (CD-ROM) 2004.11

Research paper (international conference proceedings), Joint Work, Accepted

Estimation Method of Cutting Force

Hideki Aoyama

4th Field-wise Seminar for Manufacturing Engineering (CD-ROM) 2004.10

Research paper (international conference proceedings), Single Work, Accepted

Off-line Robot Teaching System Using Virtual Reality Technology and Welding Path Determination Using Genetic Algorithm

Yu Kimishima, Hideki Aoyama, and Daisuke Matsumoto

8th International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology”, TMT2004 pp.271 - 274 2004.09

Research paper (international conference proceedings), Joint Work, Accepted

Digital Design in Future

Hideki Aoyama

Proceedings of International Workshop on Digital Design pp.69 - 80 2004.07

Research paper (international conference proceedings), Single Work, Accepted

Automatic Animation Generation from Natural Languages

Ryo Haginoya, Hideki Aoyama, Kazuyuki Honda, Kinji Odaka

Proceedings of the International Conference on Computer Graphics, Imaging and Visualization (CGiV04) pp.103 - 109 2004.07

Research paper (international conference proceedings), Single Work, Accepted

Surgical Simulation System Using Virtual Reality Technology

Keisuke Okito, Hideki Aoyama

Proceedings of the International Conference on Computer Graphics, Imaging and Visualization (CGiV04) pp.328 - 333 2004.07

Research paper (international conference proceedings), Joint Work, Accepted

デジタルスタイルデザインに関する研究　－ハイライト曲線に基づく意匠形状の高品位化システム　－

生越輝和，青山英樹，大西正和

精密工学会誌 (精密工学会) Vol. 70 ( No. 4 ) pp.495 - 501 2004.04

Research paper (scientific journal), Joint Work, Accepted

Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections

Hideki Aoyama, Tomoya Ishi

Journal of Manufacturing Processes Vol.6 ( No.2 ) 141-147 2004.02

Research paper (scientific journal), Joint Work, Accepted

工作物フィクスチュアリング計画システムの開発

財津育浩，青山英樹，青山藤詞郎

設計工学（日本設計工学会誌） (日本設計工学会) Vol. 39 ( No. 2 ) pp.93 - 99 2004.02

Research paper (scientific journal), Joint Work, Accepted

Development of the Holonic Fixturing System (HOLOFIX)

I. Zaitsu, H. Aoyama, T. Aoyama, H. Shibata, M. Sudo

Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.719 - 724 2003.11

Research paper (international conference proceedings), Joint Work, Accepted

Digital Style Design - Modeling System Based on Highlight Lines-

Terukazu Ogoshi, Hideki Aoyama

Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.797 - 802 2003.11

Research paper (international conference proceedings), Joint Work, Accepted

Digital Style Design - Modeling System Based on Characteristic Lines –

Yoshihisa Sakai, Hideki Aoyama

Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.793 - 796 2003.11

Research paper (international conference proceedings), Joint Work, Accepted

Database Construction System of Cutting Conditions with Cutting Aspects

Satoshi Kobayashi, Hideki Aoyama

Proceedings of International Conference on Leading Edge Manufacturing in 21st Century (LEM21) pp.829 - 832 2003.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of Off-line Robot Teaching System Using Virtual Reality Technology

Daisuke Matsumoto, Hideki. Aoyama

Proceedings of 36th CIRP International Seminar on Manufacturing Systems pp.545 - 550 2003.06

Research paper (international conference proceedings), Joint Work, Accepted

Sensor to Detect Cutting Force Components, Cutting Torque, and Cutting Tool Deflections

Hideki Aoyama, Tomoya Ishi

Transactions of NAMRI/SME Vol. XXXI pp.491 - 498 2003.05

Research paper (scientific journal), Joint Work, Accepted

意匠設計支援のための形状嗜好予測に関する基礎研究

松田龍人，青山英樹

デザイン学研究（日本デザイン学会誌） (日本デザイン学会) Vol. 50 ( No.1 ) pp.43 - 48 2003.01

Research paper (scientific journal), Joint Work, Accepted

CMPによるシリコンウェハの平坦化に関する研究

佐々木善章，青山英樹，稲崎一郎，柴田博志

日本機械学会論文集（C編） (日本機械学会) 68巻 ( 674号 ) pp.3108 - 3114 2002.10

Research paper (scientific journal), Joint Work, Accepted

Computer Aided Chair Design System Using Form Features

Matsumoto Mio, Hideki Aoyama

Proceedings of Sixth International Conference on Information Visualization pp.135 - 138 2002.07

Research paper (international conference proceedings), Joint Work, Accepted

Virtual Studio System

Kazuyuki Honda, Hideki Aoyama

Poster Session of International Conference on Information Visualization 2002.07

Research paper (international conference proceedings), Single Work, Accepted

Fixturing Functional Model for Automation of Fixturing Planning

Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama

Proceedings of 2002 Japan-USA Symposium on Flexible Automation (2002JUSFA) pp.637 - 640 2002.07

Research paper (international conference proceedings), Joint Work, Accepted

Free Form Modeling Method Based on Silhouette and Boundary Lines

Jun Kamiya, Hideki Aoyama

Proceedings of Sixth International Conference on Information Visualization pp.130 - 134 2002.07

Research paper (international conference proceedings), Joint Work, Accepted

フィクスチュアリングフィーチャに基づく工作物最適クランプ位置の決定（フィクスチュアリングフィーチャの概念と二次元モデルへの適用）

財津育浩，青山英樹，青山藤詞郎

日本機械学会論文集（C編） (日本機械学会) 68巻 ( 670号 ) pp.1903 - 1909 2002.06

Research paper (scientific journal), Joint Work, Accepted

Virtual Clay Modeling System Used for Creating Basic Idea of Product Shape

Hideki Aoyama, Hiroyuki Fujiki

Transactions of NAMRI/SME Vol. XXX pp.681 - 687 2002.05

Research paper (scientific journal), Joint Work, Accepted

Construction of three-dimensional Model from Sketch for Style Design of Automobile Body Form

Yoshinori URABE, Hideki AOYAMA

Proceedings of 5th Franco-Japanese Congress & 3rd European-Asian Congress of Mechatronics pp.531 - 535 2001.10

Research paper (international conference proceedings), Joint Work, Accepted

Easy Construction of 3D Model from 2D Information

Yoshinori Urabe, Hideki Aoyama

Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.842 - 846 2001.07

Research paper (scientific journal), Joint Work, Accepted

Fixturing Feature for Determining Optimum Clamping Points - Concept of Fixturing Feature and its Application to 2-D and 3-D Workpiece Models -

Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama

Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.887 - 891 2001.07

Research paper (scientific journal), Joint Work, Accepted

Aesthetic Design Based on “Kansei Language”

Manabu Ota, Hideki Aoyama

Initiatives of Precision Engineering at the Beginning of a Millennium (ICPE 2001) pp.917 - 921 2001.07

Research paper (scientific journal), Joint Work, Accepted

Autonomous Measurement of Physical Model Shape for Reverse Engineering

Hideki AOYAMA, Yuu Suzuki

Journal of Manufacturing Systems Vol.19 ( No.6 ) 375-383 2001.06

Research paper (scientific journal), Joint Work, Accepted

Aesthetic Design System Based on Sketch, Design Language, and Characteristic Lines

Hideki Aoyama, Yoshinori Urabe, Manabu Ohta, Takeo Kusunoki

Proceedings of CIRP 34th International Seminar on Manufacturing Systems pp.83 - 87 2001.05

Research paper (international conference proceedings), Joint Work, Accepted

Method for Creating High Quality Computer Model from Rough Model

Hideki Aoyama, Yuichiro Nishizawa

Transaction of NAMRI/SME Vol. XXIX pp.549 - 556 2001.05

Research paper (scientific journal), Joint Work, Accepted

Surface Modeling Based on Characteristic Lines

Takeo Kusunoki, Hideki Aoyama

Transaction of NAMRI/SME Vol. XXIX pp.563 - 568 2001.05

Research paper (scientific journal), Joint Work, Accepted

AUTONOMOUS MEASUREMENT OF PHYSICAL MODEL SHAPE FOR REVERSE ENGINEERING

Hideki AOYAMA, Yuu Suzuki

Proceedings of Asian Academy Seminar on Advanced Manufacturing System pp.62 - 67 2000.12

Research paper (international conference proceedings), Joint Work, Accepted

Surface Modeling Based on Characteristic Lines

Takeo KUSUNOKI, Hideki AOYAMA

Proceedings of 日本機械学会　中国機械学会　国際会議 (ICOMES) 2000.11

Research paper (international conference proceedings), Joint Work, Accepted

Application of CAM System by Estimating Cutting Force

Hiroki MURASHITA Hideki AOYAMA

Proceedings of 日本機械学会　中国機械学会　国際会議 (ICOMES) 2000.11

Research paper (international conference proceedings), Joint Work, Accepted

Fixturing Feature for Determining Optimum Clamping Points - Concept of Fixturing Feature and its Application to 2D Workpiece Model

Ikuhiro Zaitsu, Hideki Aoyama, Tojiro Aoyama

Proceedings of 2000 Japan-USA Symposium on Flexible Automation 2000.08

Research paper (international conference proceedings), Joint Work, Accepted

Rapid Construction of Digital Model by Using Virtual Clay Modeling System

Hiroyuki Fujiki, Hideki Aoyama

Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing (Proc. of FAIM 2000) pp.843 - 850 2000.06

Research paper (international conference proceedings), Joint Work, Accepted

Construction of High Quality CAD Model from Rough Physical Model

Hideki Aoyama, Yuichiro Nishizawa

Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing (Proc. of FAIM 2000) pp.813 - 822 2000.06

Research paper (international conference proceedings), Joint Work, Accepted

Basic Study on Development of Sensor to Detect Cutting Force Components Based on Villari Effect

Hideki Aoyama, Akio Amemiya, Ichiro Inasaki

Transactions of NAMRI/SME Vol. XXVIII pp.323 - 328 2000.05

Research paper (scientific journal), Joint Work, Accepted

Fiber optic surface topography measurement sensor and its design study

Yue Yang, Kazuo Yamazaki, Hideki Aoyama, Sadayuki Matumiya

Precision Engineering Vol. 24 ( No. 1 ) pp.32 - 40 2000.01

Research paper (scientific journal), Joint Work, Accepted

Autonomous Measurement of Objects for Reverse Engineering

Khoichiro Nakayama, Hideki Aoyama

CIRP-Journal of Manufacturing Systems Vol. 30 ( No.1 ) pp.57 - 64 2000.01

Research paper (scientific journal), Joint Work, Accepted

Development of Virtual Clay Modeling System

Hiroyuki Fujiki, Hideki Aoyama

CIRP-Journal of Manufacturing Systems Vol. 30 ( No.1 ) pp.71 - 76 2000.01

Research paper (scientific journal), Joint Work, Accepted

切削抵抗力見積りCAMシステムの開発

村下弘樹、青山英樹

型技術 (日刊工業新聞社) Vol.14 ( No.12 ) 24-25 1999.12

Research paper (scientific journal), Joint Work

Basic Research on Development of Magnetostrictive Sensor for Detecting Cutting Force

Hideki AOYAMA, Hiroki MURASHITA, Tomoya ISHII, Hiro OHZEKI

Proceedings from ASPE 1999 Annual Meeting Vol. 20 pp.256 - 259 1999.11

Research paper (international conference proceedings), Joint Work, Accepted

Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring

Hiro Ohzeki, Akihiro Mashine, Hideki Aoyama, Ichiro Inasaki

Journal of Manufacturing Science and Engineering (Transactions of the ASME) Vol. 121 pp.615 - 622 1999.11

Research paper (scientific journal), Joint Work, Accepted

リバースエンジニアリングにおける物理モデル形状の自動計測

青山英樹，鈴木由宇

精密工学会誌(1999) (精密工学会) Vol. 65 ( No.7 ) pp.1016 - 1020 1999.07

Research paper (scientific journal), Joint Work, Accepted

Autonomous Measurement of Object for Reverse Engineering

Koichiro NAKAYAMA, Hideki AOYAMA

Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems, (Leuven, Belgium, May 24-26, 1999) (Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems) pp.73 - 82 1999.05

Research paper (international conference proceedings), Joint Work, Accepted

Autonomous Measurement of Physical Shape for Reverse Engineering

Hideki AOYAMA, Yuu Suzuki

Transactions of the North American Manufacturing Research Institution of SME pp.251 - 256 1999.05

Research paper (scientific journal), Joint Work, Accepted

Development of Virtual Clay Modeling System

Hiroyuki FUJIKI, Hideki AOYAMA

Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems, (Leuven, Belgium, May 24-26, 1999) pp.91 - 97 1999.05

Research paper (international conference proceedings), Joint Work, Accepted

Development of Surface Grinding Machine with Linear Moter Driven Table System

Takeyasu KOBAYASHI, Ichiro INASAKI, Hideki AOYAMA, Akinori YUI, Atsushi HORIKOSHI

Proceedings of the International Seminar on Improving Machine Tool Performance pp.77 - 83 1998.07

Research paper (international conference proceedings), Joint Work, Accepted

Prediction of Tool Wear and Tool Failure in Milling by Utilizing Magnetostrictive Torque Sensor

Hideki AOYAMA, Ichiro INASAKI, Ichiro SUDA, Hiro OHZEKI

Technical papers of the North American Manufacturing Research Institution of SME pp.125 - 130 1998.05

Research paper (scientific journal), Joint Work, Accepted

Modeling of the Milling Processes Based on the Form-Shaping Theory

Hideki AOYAMA, Ichiro INASAKI, Hiro OHZEKI, Ichiro SUDA

Proceedings of CIRP International Workshop on Modeling of Machining Operations (Atlanta, 1998) pp.387 - 395 1998.05

Research paper (international conference proceedings), Joint Work, Accepted

Evaluation of Effective CMP Conditions by Estimation of Pressure Distribution on Semiconductor Wafer

Yoshiaki SASAKI, Hideki AOYAMA, Ichiro INASAKI, Hiroo MIYAIRI, Hiroshi SHIBAYA

Proceedings of Silicon Machining (ASPE 1998 Spring Topical Meeting Volume 17 pp.92 - 95 1998.04

Research paper (international conference proceedings), Joint Work, Accepted

Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring

Hiro OHZEKI, Akihiro MASHINE, Hideki AOYAMA, Ichiro INASAKI

Manufacturing Science and Engineering, MED-Vol.6-1 (1997 ASME International Mechanical Engineering Congress and Exposition) pp.129 - 136 1997.11

Research paper (international conference proceedings), Joint Work, Accepted

Monitoring of Tool Wear and Tool Failure by Cutting Torque in Milling Process

Hideki AOYAMA, Ichiro Suda, Ichiro INASAKI, Hiro OHZEKI, Akihiro MACHINE

Proceedings of International Conference on Manufacturing Milestones toward the 21th Century MM21 pp.101 - 106 1997.07

Research paper (international conference proceedings), Joint Work, Accepted

Development of Automatic Measuring System of Cutting Tool Geometry

Hideki AOYAMA, Tojiro AOYAMA, Kentaro TAGUCH, Shigeru INOUE

Advances in Abrasive Technology (published by World Scientific) pp.197 - 201 1997.07

Research paper (scientific journal), Joint Work, Accepted

Autonomous Measurement of Position Vectors and Unit Normal Vectors of Discrete Points on Unknown Object

Yu SUZUKI, Hideki AOYAMA

Rapid Product Development (Published by Chapman & Hall) pp.521 - 527 1997.07

Research paper (scientific journal), Joint Work, Accepted

Construction of Computer Model with Free Form Surfaces by Measurement of Discrete Points on Physical Model

Ryohta FUJII, Hideki AOYAMA

Rapid Product Development (Published by Chapman & Hall) pp.547 - 555 1997.07

Research paper (scientific journal), Joint Work, Accepted

Development of Autonomous Measuring System for Unknown Object

Hideki AOYAMA

Conference Proceedings of International Conference and Exhibition on Design and Production of Dies and Molds pp.359 - 364 1997.06

Research paper (international conference proceedings), Single Work, Accepted

Extraction of Boundary Lines between Free Form Surfaces for Construction of Computer Model

Hideki Aoyama, Ichiro Inasaki

Transactions of the North American Manufacturing Research Institution of SME Vol. XXV pp.293 - 298 1997.05

Research paper (scientific journal), Joint Work, Accepted

Cutting Force Sensing by Utilizing Magnetostrictive Effect

Hideki Aoyama, Ichiro Inasaki

The International Journal for Manufacturing Science & Production Vol.1 ( No.1 ) pp.27 - 32 1997.01

Research paper (scientific journal), Joint Work, Accepted

Optical Sensor for Detecting a Position and an Inclination

Hideki Aoyama, K. Yamazaki, M. Sawabe

Jornal of Manufacturing Science and Engineering -Transactions of the ASME Vol.118/3 pp.400 - 405 1996.08

Research paper (scientific journal), Joint Work, Accepted

Cutting Force Sensing by Utilizing Magnetostrictive Effect

H. AOYAMA, I.INASAKI

Proceedings of International Manufacturing Engineering Conference, pp.319 - 321 1996.08

Research paper (international conference proceedings), Joint Work, Accepted

Surface Classification and Model Construction Based on Processing Position Vectors and Unit Normal Vectors

Hideki Aoyama, Ichiro Inasaki

Transactions of the North American Manufacturing Reserch Institution of SME Vol. XXIV pp.211 - 216 1996.05

Research paper (scientific journal), Joint Work, Accepted

Construction of the Computer Model with High Quality Free-Form Surfaces from a Physical Model

H. AOYAMA，I. INASAKI

Proceedings of the 13th Symposium on Engineering Applications of Mechanics (CSME FORUM SCGM 1996) pp.352 - 357 1996.05

Research paper (international conference proceedings), Joint Work, Accepted

PAS (PLASMA ACTIVATED SINTERING) TRANSIENT SINTERING PROCESS CONTROL FOR RAPID CONSOLIDATION OF POWDERS

K. Yamazaki, S.H. Risbud, H. Aoyama, and K. Shoda

Journal of Materials Processing Technology Vol. 56 pp.955 - 965 1996.01

Research paper (scientific journal), Joint Work, Accepted

Development of a Sensor Utilizing a Magnetostrictive Effect for Detecting Cutting Torque in the Milling Process

H. AOYAMA，I. INASAKI，H. OHZEKI，A. MASHINE

Proceedings of the 2nd International ABTEC Conference pp.428 - 433 1995.11

Research paper (international conference proceedings), Joint Work, Accepted

Measuring Sensors and Data Processing on Reverse Engineering

H. AOYAMA，I. INASAKI

Proceedings of the International Conference on Precision Engineering '95, pp.644 - 649 1995.11

Research paper (international conference proceedings), Joint Work, Accepted

Autonomous Process Planning with Real-Time Machining for Productive Sculptured Surface Manufacturing Based on Automatic Recognition of Geometric Features

Kazuo Yamazaki, Yasuhiro Kawahara, Jieh-Chian Jeng, Hideki Aoyama

Annals of the CIRP Vol.44/1 pp.439 - 444 1995.08

Research paper (scientific journal), Joint Work, Accepted

Cutting Force Sensing in Milling Process

Hideki Aoyama, Hiroo Ohzeki, Akihiro Mashine, Jiro Takashita

VDI BERICHTE NR. 1179 pp.319 - 333 1995.03

Research paper (scientific journal), Joint Work, Accepted

Plasma Activated Powder Sintering for Rapid Net Shape Manufacturing- Principle, Control and Results -

Munehiko YOKOGAWA, Kazuo YAMAZAKI, Subhash H. RISBUD, Joanna GROZA, Hideki AOYAMA, Kazuo SHODA

Advancement of Intelligent Production (PSPE Publication Series No.1) pp.582 - 587 1994.09

Research paper (scientific journal), Joint Work, Accepted

A New Method for Constructing a Software Model of Sculptured Surfaces with C2 Continuity from a Physical Model

H. AOYAMA，I. INASAKI，T. KISHINAMI，K. YAMAZAKI

Advancement of Intelligent Production (PSPE Publication Series No.1) pp.7 - 12 1994.09

Research paper (scientific journal), Joint Work, Accepted

非接触型法線・位置検出センサによる三次元形状の自律高速測定に関する研究（第２報）－法線・位置検出センサエレメントの試作と評価－

青山英樹，山崎和雄，Kee Sein LEE，西村国俊

精密工学会誌 (精密工学会) Vol.60 ( No.7 ) pp.954 - 958 1994.07

Research paper (scientific journal), Joint Work, Accepted

Measuring Methods of Shape Elements by Detecting Position Vectors and Unit Normal Vectors

H. AOYAMA，I. INASAKI，T. KISHINAMI，K. YAMAZAKI

PROCEEDINGS OF 1994 JAPAN-U.S.A. SYMPOSIUM ON FLEXIBLE AUTOMATION pp.563 - 568 1994.07

Research paper (international conference proceedings), Joint Work, Accepted

非接触型法線・位置検出センサによる三次元形状の自律高速測定に関する研究（第１報）－マルチビーム投光型法線・位置同時連続検出センサの設計－

青山英樹，山崎和雄，Kee Sein LEE，沢辺雅二

精密工学会誌 (精密工学会) Vol.60 ( No.6 ) pp.847 - 852 1994.06

Research paper (scientific journal), Joint Work, Accepted

Non-Contact Probe for Continuous Measurement of Surface Inclination and Position using Dynamic Irradiation of Light Beam

K. YAMAZAKI，H. AOYAMA，K.S. LEE，M. SAWABE

Annals of the CIRP Vol.42/1 pp.585 - 588 1993.08

Research paper (scientific journal), Joint Work, Accepted

Optical Sensor for Detecting a Position and an Inclination

H. AOYAMA，K. YAMAZAKI，M. SAWABE

Proceeding of International Conference on Advanced Mechatronics pp.306 - 311 1993.08

Research paper (international conference proceedings), Joint Work, Accepted

PAS: PLASMA ACTIVATED SINTERING - TRANSIENT SINTERING PROCESS CONTROL FOR RAPID CONSOLIDATION OF POWDERS -

K. YAMAZAKI，S. H. RISBUD，H. AOYAMA，K. SHODA

Proceedings of the International Conference On Advances in Materials and Processing Technology pp.1357 - 1367 1993.08

Research paper (international conference proceedings), Joint Work, Accepted

A Distributed Autonomic Tool Management Method Based on Intelligent Cutting Tool

H. AOYAMA，T. KISHINAMI，K. SAITO，M. SATO，K. YAMAZAKI

Proceeding of the Japan U.S.A. Symposium on Flexible Automation pp.1723 - 1728 1992.07

Research paper (international conference proceedings), Joint Work, Accepted

位置ベクトルと単位法線ベクトルの検出に基づく自由曲面加工形状の評価法に関する基礎研究

青山英樹，岸浪建史，斎藤勝政

精密工学会誌 (精密工学会) Vol.57 ( No.9 ) pp.1651 - 1657 1991.09

Research paper (scientific journal), Joint Work, Accepted

位置ベクトルと単位法線ベクトルの検出に基づく寸法測定システムの開発

青山英樹，岸浪建史，斎藤勝政，河合正治

精密工学会誌 (精密工学会) Vol.57 ( No.5 ) pp.807 - 812 1991.05

Research paper (scientific journal), Joint Work, Accepted

A Proposition of an Interpolation Form Defined by Position Vectors and Unit Normal Vectors

H. AOYAMA，T. KISHINAMI

International Journal of The Japan Society for Precision Engineering Vol.25 ( No.3 ) pp.239 - 241 1991.03

Research paper (scientific journal), Joint Work, Accepted

A New Method for Detecting the Contact Point between a Touch Probe and a Surface

H. AOYAMA，M. KAWAI，T. KISHINAMI

Annals of the CIRP Vol.38/1 pp.517 - 520 1989.08

Research paper (scientific journal), Joint Work, Accepted

A Range Finder Based on Stereo Vision and Multi-Spot Projection for Computer Vision

H. AOYAMA，T. KISHINAMI，K. SAITO

Proceedings of The International Conference on Advanced Mechatronics (JSME) (JSME) pp.635 - 640 1989.08

Research paper (international conference proceedings), Joint Work, Accepted

A method of tool management based on an intelligent cutting tool

H. AOYAMA，T. KISHINAMI，K. SAITO

Journal of the Advanced Manufacturing Engineering Vol.1 ( No.4 ) pp.210 - 216 1989.04

Research paper (scientific journal), Joint Work, Accepted

球面抵抗薄膜を用いた接触式面法線検出プローブの基礎的研究

青山英樹，岸浪建史，斎藤勝政

精密工学会誌 (精密工学会) Vol.54 ( No.10 ) pp.1957 - 1962 1988.10

Research paper (scientific journal), Joint Work, Accepted

逃げ面摩耗量検出センサ内蔵型スローアウェイ工具の開発

青山英樹，岸浪建史，斎藤勝政

精密工学会誌 (精密工学会) Vol.54 ( No.4 ) pp.704 - 709 1988.04

Research paper (scientific journal), Joint Work, Accepted

A Study on a Intelligent Cutting Tool

H. AOYAMA，T. KISHINAMI，K. SAITO

Proceedings of the 6th International Conference on Production Engineering (ICPE) in Osaka pp.206 - 211 1987.09

Research paper (international conference proceedings), Joint Work, Accepted

A Study on a Throw Away Tool Equipped with a Sensor to Detect Flank Wear

H. AOYAMA，T. KISHINAMI，K. SAITO

Bulletin of the Japan Society of Precision Engineering Vol.21 ( No.3 ) pp.203 - 208 1987.03

Research paper (scientific journal), Joint Work, Accepted

Development of the Elliptic Ball-End-Mill

H. AOYAMA，T. KISHINAMI，K. SAITO

Bulletin of the Japan Society of Precision Engineering Vol.20 ( No.4 ) pp.291 - 293 1986.04

Research paper (scientific journal), Joint Work, Accepted

楕円ボールエンドミルの開発と切削性能に関する研究

青山英樹，岸浪建史，斎藤勝政

精密工学会誌 (精密工学会) Vol.53 ( No.3 ) pp.461 - 466 1986.03

Research paper (scientific journal), Joint Work, Accepted

水素吸蔵合金を利用したアクチュエータの開発

佐々木忠之，川嶋稔夫，青山英樹，伊福部達，小川孝寿

日本ロボット学会誌 (日本ロボット学会) Vol.4 ( No.2 ) pp.119 - 122 1986.02

Research paper (scientific journal), Joint Work, Accepted

　 Previous page - Next page 　