Papers - Aoyama, Hideki
-
DEVELOPMENT OF SYSTEM FOR HIGH QUALITY WOOD GRAIN DESIGN
Takuya Mori, Satoshi Shibasaki, Hideki Aoyama
Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE) (ASME) pp.1 - 9 2011.08
Research paper (international conference proceedings), Joint Work, Accepted
-
Novel Electrode Design Method for Orbiting Electrical Discharge Machining
Hideki Aoyama, Tutik Sriani
ASEAN Engineering Journal (Manufacturing Engineering Mechanical and Aeronautical Engineering) Vol.1 ( No.1 ) pp.14 - 24 2011.07
Research paper (scientific journal), Joint Work, Accepted
-
DESIGN CREATION SYSTEM BASED ON DESIGNER’S KANSEI AND CONSUMER’S PREFERENCE
Hideki Aoyama, Kentaro Ohshima
PROCEEDINGS OF THE IADIS INTERNATIONAL CONFERENCE -INTERFACES AND HUMAN COMPUTER INTERACTION 2011- (IADIS) pp.241 - 248 2011.07
Research paper (international conference proceedings), Joint Work, Accepted
-
VIRTUAL CLAY MODELING SYSTEM BASED ON AESTHETIC CURVES
Hideki Aoyama, Hiroshige Kai
Proceedings of the ASME 2011 World Conference on Innovative Virtual Reality WINVR2011 (ASME) pp.1 - 6 2011.06
Research paper (international conference proceedings), Joint Work, Accepted
-
洗面ボール形状と人の感性の関係分析によるデザイン支援方法の構築
橋田規子, 小暮真弥子, 青山英樹
デザイン学研究（日本デザイン学会誌） (日本デザイン学会) Vol.57 ( No.6 ) pp.1 - 8 2011.06
Research paper (scientific journal), Joint Work, Accepted
-
Intelligent CAD Tool to Solve Challenges in the Design of Orbiting EDM Electrode
T. Sriani, H. Aoyama
SAE International Congress Vol.4 pp.166 - 173 2011.04
Research paper (scientific journal), Joint Work, Accepted
-
Intelligent CAD Tool to Solve Challenge in the Design Orbiting EDM Electrode
Tutik Sriani, Hideki Aoyama
SAE International Journal of Passenger Cars- Electronic and Electrical Systems Vol.4 ( Issue 1 ) 166-173 2011.04
Research paper (international conference proceedings), Joint Work, Accepted
-
Design Principle and Automation of Tool for Orbiting Micro-Electrical Discharge Machining
T. Sriani, H. Aoyama
Proceedings of the 6th International Conference on MicroManufacturing (ICOMM2011) (JSPE,JSAT,JSME,JSTP) pp.443 - 448 2011.03
Research paper (international conference proceedings), Joint Work, Accepted
-
Basic Study on Development of CAM system for High Speed Motion and Small Fluctuation of Feedrate and Acceleration
Kosuke Saito, Hideki Aoyama, Noriaki Sano
Proceedings of the 6th International Conference on MicroManufacturing (ICOMM2011) (JSPE,JSAT,JSME,JSTP) pp.437 - 441 2011.03
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of Brick from Paper, Composite Wood and Plastic Waste Material
Kruy Sothea, M. Hamdi, Hideki Aoyama
Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems Conference 2010 (APIEMS) pp1 - 6 2010.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Insert geometry effects on surface roughness in turning process of AISI D2 steel
Zahari TAHA, Hani-kurniati LELANA, Hideki AOYAMA, Raja Ariffin RAJA GHAZILLA, Julios GONZALES, Novita SAKUNDARINI, Suguro B.SUTONO
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering) (Springer) Vol.11 ( No.12 ) pp.966 - 971 2010.12
Research paper (scientific journal), Joint Work, Accepted, ISSN 1862-1775
-
CAD Automaton of Electrode Design for Orbiting EDM
Tutik Sriani, Hideki Aoyama
Proceedings of 11th Asia Pacific Industrial Engineering & Management Systems Conference 2010 (APIEM2010) (APIEMS) pp.1 - 7 2010.12
Research paper (international conference proceedings), Joint Work, Accepted
-
Electrode Design Automation of Orbiting Electrical Discharge Machining (EDM)
Tutik Sriani, Hideki Aoyama
Proceedings of the 14th International Conference on Mechatronics Technology (ICMT 2010) pp.1 - 6 2010.11
Research paper (international conference proceedings), Joint Work, Accepted
-
デジタルスタイルデザインに関する研究 ―木目模様デザインシステムの開発―
柴崎 慧, 青山 英樹
精密工学会誌 (精密工学会) Vol.76 ( No.11 ) pp.1293 - 1298 2010.11
Research paper (scientific journal), Joint Work, Accepted
-
Development of Surface Refining System Using Highlight Lines
Hideki Aoyama, Yusuke Komatsu
Proceedings of the 2nd International Conference on Design Engineering and Science (ICDES2010) (JSDE) pp.324 - 329 2010.11
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of a Crush and Mix Machine for Composite Brick Fabrication
Kruy Sothea, Nik Fazil, M. Hamdi, Hideki Aoyama
AIP Conference Proceedings Volume 1315 (INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (AMPT2010)) pp.1437 - 1442 2010.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Study on Virtual Clay Modeling System Using Refined Curves in Technological Aspect
Hiroshige Kai, Hideki Aoyama
Proceedings of IDMME-Virtual Concept 2010 (AIP-Primeca) 1-6 2010.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of System to Support and Evaluate Chair Design
Hideki Aoyama, Kengo Nieda, Mio Matsumoto
Proceedings of IDMME-Virtual Concept 2010 (AIP-Primeca) 1-6 2010.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Basic Study on Development of CAM System for Laser Forming
Shotaro ISHIHARA, Toshihiko NAKAMURA, Hideki AOYAMA, Naohisa MATSUSHITA, Akihiro USHIMARU
Proceedings of 4th CIRP International Conference on High Performance Cutting (CIRP) pp.159 - 164 2010.10
Research paper (international conference proceedings), Joint Work, Accepted
-
Development of CAD System Based on Function Features
Sonken Ando, Ryo Ikeda, Hideki Aoyama, Norihito Hiruma
Key Engineering Materials Vols.447-448 442-446 2010.09
Research paper (scientific journal), Joint Work, Accepted