Papers - Yamada, Kunihiro
-
Tolerant microflaw sizes and non-propagating crack behaviour
K.Yamada，M.G.Kim，T.Kunio
Mechanical Engineering Publication （U.K） EGF1 261-271 1986
Joint Work
-
低温焼入れ材の微小き裂・停留挙動に及ぼす室温時効の影響
金，山田，国尾
機械学会論文集（A編） 51巻 ( 471号 ) 2564-2568 1985.11
Research paper (conference, symposium, etc.), Joint Work
-
鋼の限界停留き裂寸法に及ぼす繰返し負荷履歴の影響
金，山田，国尾
機械学会論文集（A編） 51巻 ( 466号 ) 1529-1533 1985.06
Research paper (conference, symposium, etc.), Joint Work
-
炭素鋼平滑材の耐久限度を支配する限界停留き裂寸法の微視組識依存性について
金，山田，国尾
日本機械学会論文集（A編） 51巻 ( 465号 ) 1304-1310 1985.05
Research paper (conference, symposium, etc.), Joint Work
-
炭素鋼平滑材の疲労き裂停留条件について
金，山田，国尾
機械学会論文集A 51巻 ( 461号 ) 10-16 1985
Research paper (conference, symposium, etc.), Joint Work
-
Threshold behavior of small crack in dualphase microstructure
K.Yamada，M.Shimizu AND T.Kunio
Elsevier （日本材料学会編） 20-40 1985
Joint Work
-
Endurance Limit and Threshould Condition for Microcrack in Steels.
T.KUNIO，M.SHIMIZU，K.YAMADA ANDM.TAMURA.
Proc.Int.Conf，on Fatigue and Fatigue Thresholds，1984 V.Ⅱ 817-826 1984
Research paper (conference, symposium, etc.), Joint Work
-
Role of Oxidation in Microfracture Process of AISI316 Stainless Steel in High Temperature Low Cycle Fatigue.
T.KUNIO，M.SHIMIZU，K.YAMADA，M.FUKUMOTO AND M.ITOH.
Proc.6thInt.Conf.on Fracture，To be heldin 2257-2264 1984
Research paper (conference, symposium, etc.), Joint Work
-
パーライト・フェライト鋼の耐久限度と停留き裂挙動について
田村，山田，清水，国尾
機械学会論文集A 49巻 ( 447号 ) 1378-1387 1983
Research paper (conference, symposium, etc.), Joint Work
-
SUS316鋼の高温低サイクル疲労挙動に及ぼす酸化の影響について
伊東，福本，山田，清水，国尾
機械学会論文集A 49巻 ( 447号 ) 1388-1395 1983
Research paper (conference, symposium, etc.), Joint Work
-
The Influence of Microcrack Threshold Behavior on the Endurance Limit of Two Phase Steels
T.KUNIO，M.SHIMIZU，K.YAMADAANDH.NAKABAYASHI
Proc.Int.Conf.“Fatigue Threshold” V.1 409-422 1982
Research paper (conference, symposium, etc.), Joint Work
-
The Early Stage of Fatigue Crack Growth in Martensitic Steel
T.KUNIO，M.SHIMIZU，K.YAMADA，K.SAKURA AND T.YAMAMOTO
Int.J.of Fracture V.17 ( n2 ) 111-119 1981
Joint Work
-
The Influence of Microstructural Variations on the Fracture Process of Dual Phase Steel
T.KUNIO，M.SHIMIZU，K.YAMADA，J.K.KIM AND H.HIRUSAWA
Proc.US-Japan Joint Seminar on Fracture Mechanics of Ductile and Tough Materials and Its Application to Energy Related Structure (Martinus Nijhoff Pub) 221-230 1980
Research paper (conference, symposium, etc.), Joint Work
-
A Statistical Interpreta-tion of Fatigue limit on the Basis of the Extreme Theory
Y.KIMURA，K.YAMADA，M.SHIMIZU &T.KUNIO
Engineering Fracture Mechanics V.12 317-328 1980
Joint Work
-
マルテンサイト-フェライト複合組織鋼の延性一脆性遷移挙動を支配する第2相の役割について
金・蛭澤・山田・清水・国尾
機械学会論文集A編 45巻 ( 393号 ) 415-422 1979.05
Research paper (conference, symposium, etc.), Joint Work
-
平滑材の停留き裂挙動を支配する微視組織因子について
山田・国尾
機械学会論文集A編 45巻 ( 393号 ) 440-445 1979.05
Research paper (conference, symposium, etc.), Joint Work
-
The Role of Austenite Grains in theFatigue Crack Initiation and Propagation in the Low Carbon Martensite
T.KUNIO，M.SHIMIZU，K.YAMADA，M.ENOMOTO AND A.YOSHITAKE
Int.J.of Fatigue of Engineoring Materials and Structure V.2 ( n3 ) 237-249 1979
Joint Work
-
Microstructural Aspects of the Threshold Condition for the Non-Propagating Fatigue Cracks in Martensitic and Ferritic Steel
T.KUNIO AND K.YAMADA
American Society For Testing and Materials STP675 342-370 1979
Joint Work
-
低炭素鋼マルテンサイト状組織における旧オーステナイト粒界に沿う疲れき裂生成機構について
榎本・山田・清水・国尾
機械学会論文集 43巻 ( 375号 ) 3962-3969 1977.11
Research paper (conference, symposium, etc.), Joint Work
-
Fatigue Crack Formation Associated with Cyclic Slip Deformation along Prior Austenite Grain Boundary
T.KUNIO，M.SHIMIZU，K.YAMADA &M.ENOMOTO
Proc.4th Int.Conf.on Fracture，Canada V.2 711-718 1977
Research paper (conference, symposium, etc.), Joint Work