Papers - Yamada, Kunihiro
-
Influence of yield strength levels on crack growth mode in delayed fracture of structural steels
YAMADA KUNIHIRO
J. Engineering Fracture Mechanics (Elsevier Ltd.) 75 551-559 2008.02
Research paper (conference, symposium, etc.), Joint Work, Accepted
-
Mechanisitic Aspects of Delayed Frcture of Thin Plate and Thin Walled Hollow Specimen Subjected to Sustained Loading
YAMADA KUNIHIRO
日本 機会学会論文集 A編 69巻 688号 2003-12，1717-1722 A編 69 ( 688 ) 1717-1722 2003.12
Research paper (conference, symposium, etc.), Joint Work, Accepted
-
Mechanistic aspects of hydrogen damage in fatigue fracture of high strength bolt steel
Kaneuchi Naoki, Suzuki Toshirou and Yamada Kunihoro
Proc. of the 14th European Conference on Fracture, Cracow, Poland Vol.Ⅱ 95-102 2002.09
Joint Work
-
Development of Quasi-cleavage Crack Leading to Fracture of Hydrogen Charged High Strength Steel
小柳 貢士，鈴木 哲也，山田 邦博
材料(J.Soc.Mat.Sci.,Japan) 51 ( 5 ) 561-566 2002.05
Joint Work
-
Hot-pressed Ti-Al target for synthesizing Til-x-AlxN films by arc ion plating method
A. Kimura, T. Murakami, K. Yamada and T. Suzuki
Thin Solid Films Vol.382 101-105 2001
Joint Work
-
Critical phenomenon in hydrogen assisted crasking in high strength steel
H. Yatabe, and K. Yamada
The Proc. 13th European Conference on Fracture in CD-ROM, Eds.M.Funets et al, Sept.2000 2000.09
Joint Work
-
Elastic recoil detection analysis of hydrogen in high strength steel
A. Kimura, Y. Nakatani, K. Yamada and T. Suzuki
J Materials Science Letter Vol.19 965-966 2000
Joint Work
-
Effect of tempering treatment on hydrogen induced cracking in high strength steel
Y.Nakatani, T.Higashi and K. Yamada
Fatigue & Fracture of Engineering Materials & Structure Vol.22 ( No.5 ) 393-398 1999.05
Joint Work
-
Effects of Al cintent on hardness, lattice parameter and microstructure of Ti_1-x_Al_x_N Films
A. Kimura, H. Hasagawa, K.Yamada and T. Suzuki
Surface & Coatings Technology (Elsevier) Vol.120-121 438-441 1999
Joint Work
-
Hydrogen detection in CVD diamond Films by elastic recoil detection analysis Diamond and Related Materials
Ayako Kimura, Yujiro Nakatani, Kunihoro Yamada and Tetsuya Suzuki
Elsevier,v8 1999 37-41 1999
Joint Work
-
Initiation of intergranular cracks in SUS316 stainless steel subjected to low cycle fatigue below 750degC (Proc.Int.Conf.on Engineering against Fatigue, Sheffild, U.K.)
P.Xie, S.Nishimoto and K.Yamada
Engineering against Fatigue , A.A.Balkema, Rotterdam, 1999 37-44 1999
Joint Work
-
Formation and Characteristics of Quasi-cleavage Crack in Hydrogen Damaged Low Strength Steel
Y. Nakatani，H. Matsuoka and K. Yamada
Fracture from Defects，Ed. M.W.Brown，E.R.de los Rios and K.J.Miller，pp. Sheffield，The European Structural Integrity Society Vol.III 1121-1126 1998
Joint Work
-
薄肉形状を持つ高強度鋼材の遅れ破壊挙動について
中谷祐二郎・靭勝彦・山田邦博
日本機械学会論文集A編 64巻 ( 626号 ) 2561-2566 1998
Research paper (conference, symposium, etc.), Joint Work
-
Nucleation of intergranular cracks during high temperature low cycle fatigue of SUS 316 stainless steel
S.Nishino, W. Sakai, and K.Yamada
Fatigue & Fracture of Engineering Materials & Structure v19 ( n5 ) 581-587 1996
Joint Work
-
Formation of Hydrogen-assisted Intergranular Cracks in High Strength Steels
Yatabe，H.，Yamada，K.，E.R.de Los Rios and K.J.Miller
Fatigue & Fracture of Engineering Materials & Structute Vol.18 ( No.3 ) 377-384 1995.03
Joint Work
-
高強度鋼の遅れ破壊を支配する擬へき開割れ及び粒界割れの役割
中谷祐二郎・山田邦博
遅れ破壊解明の新展開 (日本鉄鋼協会) 13-18 1995
Joint Work
-
水素脆化した高強度鋼の粒界き裂形成を支配する要因について
中谷祐二郎・山田邦博
日本機械学会論文集A編 63巻 ( 611号 ) 1392-1397 1995
Research paper (conference, symposium, etc.), Joint Work
-
高温疲労亀裂生成過程に於ける粒界，粒内すべり部分の局所的酸化の役割
阪井，西野，山田
日本機械学会論文集A編 60巻 ( 576 号 ) 1740-1745 1994.08
Research paper (conference, symposium, etc.), Joint Work
-
鋼の微視組織強化によるき裂進展の阻止と疲労強度の向上
黒木孝，山田邦博
日本機械学会論文集（A編） Vol.60 ( No.575 ) 1498-1502 1994.07
Research paper (conference, symposium, etc.), Joint Work
-
遅れ破壊現象における初期き裂・擬へき開割れの生成条件と最終破断条件
坪井恭，山田邦博
日本機械学会論文集（A編） Vol.60 ( No.573 ) 1157-1163 1994.05
Research paper (conference, symposium, etc.), Joint Work