Papers - Matsuoka, Yoshiyuki
-
Multispace Design Model
MATSUOKA YOSHIYUKI
日本設計工学会 2018年度春季大会研究発表講演会 講演論文集 (日本設計工学会) 71 - 72 2018.05
Research paper (conference, symposium, etc.)
-
次世代モビリティのタイムアクシスデザイン
MATSUOKA YOSHIYUKI
設計工学 (日本設計工学会) vol.53 153 - 159 2018.02
-
「モノづくり×モノづかい」のためのタイムアクシスデザイン
MATSUOKA YOSHIYUKI
設計工学 (日本設計工学会) vol.53 129 - 133 2018.02
-
タイムアクシスデザインに基づく人工物の価値成長デザイン
MATSUOKA YOSHIYUKI
設計工学 (日本設計工学会) vol.53 147 - 152 2018.02
-
Comparative analysis of research for industrial design and engineering design based on multispace design model
Sakae Y., Mukai S., Sato K., Matsuoka Y.
Proceedings of International Design Conference, DESIGN (Proceedings of International Design Conference, DESIGN) 1 81 - 90 2018
-
Automotive Safety Control System Based on Timeaxis Design
Furugori, S., Kato, T. and Matsuoka, Y.
Mobility & Vehicle Mechanics, Vol.44, No.3 43 - 52 2018
Accepted
-
Proposition of M method System
Iseki, D., Amabe, S., Kato, T. and Matsuoka, Y.
Proceedings of ICEDA 2018 2018 3rd International Conference on Engineering Design and Analysis 20 - 21 2018
Joint Work, Accepted
-
Comparative Analysis of Research for Industrial Design and Engineering Design Based on Multispace Design Model
Sakae, Y., Mukai, S., Sato, K. and Matsuoka, Y.
Proceedings of DESIGN 2018 15th International Design Conference 81 - 90 2018
Research paper (international conference proceedings), Joint Work, Accepted
-
Automotive Safety Control System Based on Timeaxis Design
Furugori, S., Kato, T. and Matsuoka, Y.
Proceedings of MVM 2018 International Congress Motor Vehicles & Motors 43 - 52 2018
Research paper (international conference proceedings), Joint Work, Accepted
-
Timeaxis Design of Driving State Learning System Using Non-Steady Model
Furugori, S., Kato, T. and Matsuoka, Y.
Proceedings of 2018 Joind 10th International Conference on Soft Computing and Intelligent Systems and 19th International Symposium on Advanced Intelligent Systems 2018
Research paper (international conference proceedings), Joint Work, Accepted
-
Proposition of M method System
Iseki, D., Amabe, S., Yamano, K., Kato, T. and Matsuoka, Y.
Proceedings of ICIDC 2018 International Service Innovation Design Conference 113 - 120 2018
Joint Work, Accepted
-
Quantifying Sense of Depth Towards Visual Texture Using Optics Simulation
Shimomura, M., Kamesaka, R., Nishihara, M., Matsuoka, K., Yoshimura, T., Kato, T. and Matsuoka, Y.
Proceedings of IHSED 2019 2nd International Conference on Human Systems Engineering and Design: Future Trends and Applications 491 - 497 2018
Research paper (international conference proceedings), Joint Work, Accepted
-
M method system
Iseki, D., Amabe, S., Tanaka, H., and Matsuoka, Y.
SIGGRAPH ASIA2018 2018
Joint Work
-
人工知能×デザイン～パネルディスカッション
芸術工学会誌 53 - 58 2018
-
農業デザインのすゝめ
MATSUOKA YOSHIYUKI
日本デザイン学会誌デザイン学研究特集号 Vol.24 ( No.4 ) pp1 - pp2 2017.04
-
デザイン哲学～豊かさを再考するデザインは、『安心』と『欲望』の狭間で何を考えるか
松岡由幸
日本デザイン学会誌デザイン学研究特集号 24 ( 2 ) 36 - 37 2017
Single Work
-
デザインの哲学～豊かさを再考する
松岡由幸
日本デザイン学会誌デザイン学研究特集号 24 ( 2 ) 38 - 39 2017
Single Work
-
デッサンとスケッチの描画スキルと描画過程の関係
伊豆裕一，加藤健郎，佐藤浩一郎，松岡由幸
デザイン学研究 64 ( 2 ) 55 - 64 2017
Joint Work, Accepted
-
多空間デザインモデルに基づく座り心地研究の体系的分析
平尾章成，有田美花子，金侖慧，松岡由幸
日本機械学会論文集 83 ( 853 ) 1 - 11 2017
Joint Work, Accepted
-
Development of Basic Architecture for Health Monitoring Seat System
Arita, S. M., Kato, T., Sato, K. and Matsuoka, Y
Journal of the Science of Design 1 ( 2 ) 71 - 80 2017
Joint Work, Accepted