Toma, Tetsuya

写真a

Affiliation

Graduate School of System Design and Management (Hiyoshi)

Position

Professor

E-mail Address

E-mail address

Related Websites

Remarks

Tohma

Profile 【 Display / hide

  • After obtaining a master’s degree of science in Applied Chemistry from Keio University in 1988, Tetsuya Toma joined Sumitomo 3M as an product development engineer. He then moved to 3M Company Headquarter in the USA in 2001 and worked as an advanced product development specialist of Optical Systems Division until 2007. He developed various new products for electronics and LC display markets and successfully introduced them to the global markets. After serving for 3M for 20 years, he joined Keio University as an associate professor in 2008 and was promoted to full professorship in 2016. Ph.D. in System Design and Management, PMP (Project Management Professional). Deputy Director, Keio Photonics Research Institute. Director, PMI Japan Chapter (2010-2017). Research field: Program/project management and communication design for communities such as medical/health care, education or local resource utilization

Profile Summary 【 Display / hide

  • Program/project management and communication design for communities such as medical/health care, education or local resource utilization

Other Affiliation 【 Display / hide

  • Keio University Global Research Institute (KGRI), Program for the Advancement of Research in Core Projects, A Methodology of Social System Management to Shape Society 5.0, Project Member

  • Keio University Global Research Institute (KGRI), Keio Photonics Research Institute, Deputy Director

Career 【 Display / hide

  • 2019.08
    -
    2020.06

    Massachusetts Institute of Technology , System Design and Management Program, Visiting Scholar

  • 2001.03
    -
    2007.09

    3M Company, USA

  • 1988.04
    -
    2001.03

    Sumitomo 3M, Ltd.

  • 2007.10
    -
    2008.03

    JST

Academic Background 【 Display / hide

  • 1986.03

    Keio University, Faculty of Science and Engineering, Applied Chemistry

    University, Graduated

  • 1988.03

    Keio University, Graduate School, Division of Science and Engineering, Applied Chemistry

    Graduate School, Completed, Master's course

  • 2014.03

    Keio University, システムデザイン・マネジメント研究科, システムデザイン・マネジメント専攻

    日本, Graduate School, Completed, Doctoral course

Academic Degrees 【 Display / hide

  • 博士(システムデザイン・マネジメント学), Keio University, Coursework, 2014.03

  • Master of Science, Engineering, Keio University, Coursework, 1988.03

Licenses and Qualifications 【 Display / hide

  • Project Management Professional

 

Research Areas 【 Display / hide

  • Area studies

  • Life / Health / Medical informatics

  • Communication/Network engineering

  • Educational technology

  • Medical systems

Research Keywords 【 Display / hide

  • Regional Vitalization

  • Telemedicine

  • Telecommunication

  • Cross‐cultural Communication

  • Active Learning

display all >>

 

Books 【 Display / hide

  • What is System Design and Management

    Graduate School of System Design and Management in Keio University (Ed.), Keio University Press, 2016.11

    Scope: Co-authored

     View Summary

    ▼技術・情報・社会システムの未来をデザインする!
    大規模化・複雑化する現代社会において、私たちはどのような問題意識をもち、どのように解決方法を考えていくべきか?
    強力な学問体系である「SDM学」の全体像を初めて紹介する。

  • Leading Global Project Teams: THE NEW LEADERSHIP CHALLENGE (Japanese Translation)

    Tetsuya Toma (Supervised Translation), Nanaumi Nagamine (Translation), R. Martinelli, T. Rahschulte, and J. Waddell, Keio University Press, 2015.07

    Scope: Supervised Translation

     View Summary

    あらゆる企業がグローバルでの戦いを余儀なくされるこの時代、事業を継続しながらドメスティック企業がグローバル企業へと生まれ変わるために、経営者や変革プログラムマネージャーが果たすべき役割とは何か、フレームワークを用いて徹底解説する。
    そして、分散組織を預かるグローバルプロジェクトマネジャーが備えるべき資質とは?国内での成功体験は、そのままではグローバルで通用しない。何を捨て、何を伸ばすと、グローバルでの成功につながるのか。さまざまな事例をもとにわかりやすく学べる、まさに腹落ちする一冊。
    PMI日本支部の法人スポンサースタディグループ「グローバルPM」で教本にも採用された待望の翻訳本。

Papers 【 Display / hide

  • Vision Paper for Enabling Internet of Medical Robotics Things in Open Healthcare Platform 2030

    Y Masuda, DS Shepard, O Nakamura, T Toma

    Innovation in Medicine and Healthcare, 3-14 (Smart Innovation, Systems and Technologies)  192   3 - 14 2020

    ISSN  9789811558511

     View Summary

    © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd 2020. The medical robotics market in the global healthcare industry have spread and extended in these several years. Internet of Medical Robotics Things (IoMRT) is also growing and Internet of Things is extending a new field of healthcare application. Whereas, the previous paper suggested that, in the field of robotics, the cloud platforms for Internet of Robotics Things (IoRT) were gradually developed; therefore, the digital platform and architecture for IoMRT of the healthcare industries should be formulated when necessary. An open healthcare platform for IoMRT is expected to promote and implement the robotics and the IoMRT applications for medical and healthcare communities efficiently. In this paper, we suggest that various medical robotics and the IoMRT-related applications will be designed and verified, while the open platform for medical, healthcare-related Robotics should be proposed and verified by the research initiative named “Open Healthcare Platform 2030–OHP2030.” In addition, the vision for enabling medical robotics and the IoMRT-related applications in the OHP2030 research initiative is explained.

  • Ballpoint-pen interconnect innovation for real-time 4K/8K video transmission using GI POF

    T Toma

    Ultra-High-Definition Imaging Systems III 11305, 113050Q (Proceedings of SPIE - The International Society for Optical Engineering)  11305 2020

    ISSN  9781510633735

     View Summary

    © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. Higher quality video formats such as 4K/8K have emerged. Since these video formats require high speed communication which cannot be done with commercial copper cables to transmit uncompressed live video without latency, optical communication has been expected as an ideal solution. However, conventional silica optical fibers are not suitable to be handled by consumers for such high-speed short-reach applications, because of their fragileness and difficulties in precision connections at low cost. We propose a novel optical interconnect using a graded-index plastic optical fiber (GI POF) with each end having a glass spherical collimator lens uniquely fabricated by low-cost ballpoint pen technologies. As one of promising applications of the interconnect, improved 8K endoscope camera and its CCU (Camera Control Unit) will be discussed for medical use. At an operation room in a hospital, surgeons need to handle the camera. Video cables are inserted, bended, removed, and exchanged frequently during the operation. Silica optical fibers are not flexible for such frequent handling application. To overcome the problems, optical modules, optoelectronic composite cables using GI POF, and the ballpoint-pen interconnect were developed. Using the system, 8K video from the endoscope camera was successfully transmitted at our verification experiments.

  • Investigation report of communication at the first meeting to improve working environment for Japanese IT employees with overseas assignment in the Philippines

    Suzuki H, Sato T, Toma T

    Emotional Engineering, Vol.7: The Age of Communication (Emotional Engineering, Vol.7: The Age of Communication)     185 - 199 2019.01

    Joint Work, Except for reviews,  ISSN  9783030022082

     View Summary

    © Springer Nature Switzerland AG 2019. Nowadays, the globalization is rapidly increasing and many Japanese employees are going overseas. The first author has experienced assignment in the Philippines for globalization, but the first author had a stumbling block in work-related communication with the local workers and felt difficulty to adopt globalization. Our interviews confirmed that most Japanese IT workers assigned to the Philippines had similar experiences that the problem was difficult to take measures in advance. A sense of unease was revealed in surveys conducted in 2002 by Nishida on intercultural communication frictions in Japanese companies in the Philippines entitled “Japanese Cultural Differences Felt by Filipinos” and “Roles Sought From Japanese Bosses and Leaders by Filipinos”. Although many studies have been done on communication and interpersonal relations and it is often stated that conscious communication from the initial stages is vital to building interpersonal relationships, there are still few practical studies on the matter. Instead of initial stage communication, we focused on the first meeting conversation, conducted questionnaires on topics selection among Japanese and Filipino IT workers, verified differences in topic selection mutually using quantitative evaluation, and reported investigative results on possible reason why smooth interpersonal relationships could not be built from the initial stages.

  • Visualization of “skills for living smart” for methodology development to improve skills

    Kataoka M, Maida I, Toma T

    Emotional Engineering, Vol.7: The Age of Communication (Emotional Engineering, Vol.7: The Age of Communication)     167 - 184 2019.01

    Joint Work, Except for reviews,  ISSN  9783030022082

     View Summary

    © Springer Nature Switzerland AG 2019. Many people today have trouble socializing and feel uncomfortable and unsatisfied with human relations. Additionally, people must accomplish their life goals within a limited time frame. Based on seminars held to improve skills for “living smart,” the authors felt that the social demands of living smart are increasing. This research attempts to visualize the skills for living smart in order to develop a methodology to improve these skills. An inductive approach clarified that “skills for living smart” comprise two factors: “entry into the environment” and “breakthrough strength.” We extracted seven components of “entry into the environment” (“participation ability,” “setup force,” “future force,” “antenna power,” “chameleon power,” “enchanting power,” and “cheerleading power”) and five components of “breakthrough strength” (“incredible ability,” “first impression ability,” “rising power,” “ability to grasp the heart,” and “boosting power”). We also demonstrated the continued effectiveness of the Seminar for Living Smart training. Visualizing skills for living smart are expected to facilitate future development of methodologies to improve these skills.

  • Clinical Decision-Support System with Electronic Health Record: Digitization of Research in Pharma

    Masuda Y, Shepard D, Yamamoto S, Toma T

    Smart Innovation, Systems and Technologies (Smart Innovation, Systems and Technologies)  145   47 - 57 2019

    Joint Work, Except for reviews,  ISSN  9789811385650

     View Summary

    © 2019, Springer Nature Singapore Pte Ltd. Clinical Decision-Support (CDS) systems are architected to resolve knowledge-intensive tasks for supporting decision-making processes in the medical fields and the healthcare industry. Furthermore, CDS systems are expected to promote and contribute to the drug discovery process in pharmaceutical companies, while the CDS system can be connected and collaborated with electronic health record (EHR). However, current solutions for CDS are not well-established across different organizations and institutions in information societies because of high implementation costs and various, complex decision-making problems by medical staffs. In this paper, we suggest that the reference architecture and framework for the CDS system with EHR will be proposed and verified by the case in a hospital. In addition, the challenge and future activities for this area are expressed.

display all >>

Papers, etc., Registered in KOARA 【 Display / hide

display all >>

Reviews, Commentaries, etc. 【 Display / hide

  • 自動体外式除細動器使用時の抵抗感を緩和するための遠隔オペレーター付与の有効性評価

    増田 朗菜, 稲田 進一, 当麻 哲哉

    日本臨床救急医学会雑誌 ((一社)日本臨床救急医学会)  22 ( 2 ) 375 - 375 2019.04

    ISSN  1345-0581

  • Innovation in Cluster of Companies that Developed Traditional Craft Technology into Advanced Technology:The Case of Kyoto Nanotechnology Cluster

    Yuichi Oshima, and Tetsuya Toma

    Planning and Public Management (Japan Association for Planning and Public Management)  40 ( 3 ) 54 - 61 2017

    Prompt report, short report, and research note, etc. (scientific journal), Joint Work

  • 医学教育における3D映像効果の検討

    TOMA Tetsuya

    第41回救急医学会 ((一社)日本救急医学会)  24 ( 8 ) 596 - 596 2013.08

    ISSN  0915-924X

  • Introduction on Project Management Program in English Initiated by Graduate School of System Design and Management in Keio University

    Hiroko Nagaya, and Tetsuya Toma

    Journal of Japanese Society for Engineering Education (Japanese Society for Engineering Education)  61 ( 5 ) 51 - 54 2013

    Prompt report, short report, and research note, etc. (scientific journal), Joint Work

  • Status of Project Management Education in the World and Accreditation of Project Management Degree Programs

    TOMA Tetsuya

    Journal of Japanese Society for Engineering Education (Japanese Society for Engineering Education)  61 ( 5 ) 16 - 21 2013

    Introduction and explanation (scientific journal), Single Work

display all >>

Presentations 【 Display / hide

  • A Business Game for “Eigyou” Practitioners to Understand the Importance of “Integrative Bargaining”

    Motoki Asai, Tetsuya Toma, and Masaru Nakano

    49th International Simulation and Gaming Association Conference (Nakorn Pathom, Thailand) , 2018.07, Oral Presentation(general), ISAGA2018

  • Vision paper for enabling Digital Healthcare applications in OHP2030

    Tetsuya Toma, Yoshimasa Masuda, and Shuichiro Yamamoto

    6th KES International Conference on Innovation in Medicine and Healthcare (Gold Coast, Australia) , 2018.06, Oral Presentation(general), KES-InMed-18

  • Proposal of a Methodology for Redesigning Concept for Lost Traditional Craft Industries

    Masahiro Yoritama, and Tetsuya Toma

    Council of Engineering Systems Universities Global Conference Tokyo (Tokyo, Japan) , 2018.06, Oral Presentation(general), CESUN2018

  • Outcome Prediction of Software Projects for Information Technology Vendors

    Tomoyuki Kawamura, Tetsuya Toma, and Kenichi Takano

    2017 IEEE International Conference on Industrial Engineering and Engineering Management (Singapore) , 2017.12, Oral Presentation(general), IEEM

  • Effective Training Method for Reducing the Risk of Visual Delay Assuming Telesurgery Application

    Iwane Maida, and Tetsuya Toma

    The 4th International Conference on Serviceology (Tokyo, Japan) , 2016.09, Oral Presentation(general), ICServ2016

display all >>

Research Projects of Competitive Funds, etc. 【 Display / hide

  • Research on System Design for Local Revitalization and Problem Solving of Hanno City

    2015.10
    -
    2017.03

    Hanno City, Tetsuya Toma, Principal Investigator

  • ヘルスリテラシー向上のための生体ログデータ分析に基づく健康情報フィードバック

    2014.04
    -
    2018.03

    情報通信研究機構(NICT), ソーシャル・ビッグデータ利活用・基盤技術の研究開発, Tetsuro Ogi

     View Remarks

    プロジェクト総額4,000万円

  • 「世界最速プラスチック光ファイバーと高精細・大画面ディスプレイのためのフォトニクスポリマーが築くFace-to-Faceコミュニケーション産業の創出」(中心研究者 小池康博)

    2010
    -
    2014.03

    内閣府, 平成21年度内閣府最先端研究開発支援プログラム事業(略称FIRST), Koike Yasuhiro, Co-investigator

     View Summary

    サブテーマ3リーダー

     View Remarks

    プロジェクト総額42億円

  • 少子超高齢化社会における大学を中心とした健康町づくり構想「世界最速プラスチック光ファイバを用いた非圧縮フルハイビジョン映像伝送によるチーム医療への応用」

    2009.10
    -
    2010.09

    研究推進センター, 研究推進センター研究助成金「ウェルネス・コミュニティ・プロジェクト」課題A, Yasuhiro Koike, Co-investigator

     View Remarks

    プロジェクト総額1500万円

  • 「サステナビリティと導入インセンティブを創発するダイナミックな管理システムに関する研究開発」

    2009
    -
    Present

    総務省, 総務省PREDICT, Co-investigator

     View Summary

    プロジェクト総額6500万円

display all >>

Works 【 Display / hide

  • 超高精細映像伝送のための新規光インターコネクトの提案

    TOMA Tetsuya

    横浜, 

    2013.12

    Other

  • フォトニクスポリマー領域におけるR&Dと実用化に向けた課題

    TOMA Tetsuya

    2013.10

    Other, Single

  • 世界最速プラスチック光ファイバーによる革新的ボールペン型光インターコネクトを初公開

    TOMA Tetsuya

    2013.06

    Other, Single

  • Latest Research Findings at KPRI for Face-to-Face Communication

    TOMA Tetsuya

    Anaheim, USA, 

    2013.03

    Other, Single

  • 高精細画像システム ハード面からみた医学教育における3Dの可能性

    TOMA Tetsuya

    2012.07

    Other, Joint

display all >>

Intellectual Property Rights, etc. 【 Display / hide

  • WO 2007/143341, US7950838, Light Directing Film, 2007

    Application No.: US2007/0279773  2007 

    Registration No.: WO 2007/143341, US7950838  2007

    Patent, PCT international application

  • WO 2005/062082, Brightness Enhancing Film Composition, 2005

    Patent, National application

  • JP2002-332465A, 熱硬化性接着剤組成物 (Thermosetting adhesive composition), 2002

    Patent, National application

  • WO 01/64805, Release Material, Release Material Article, and Process for Producing the Release Material Article, 2001

    Patent, National application

  • Constraint-Type Viscoelastic Dampers

    Application No.:   1999.08 

    Announcement No.: JP2001-82537A   

    Patent, National application

display all >>

 

Courses Taught 【 Display / hide

  • TECHNOLOGY ROADMAPPING & DEVELOPMENT

    2021

  • TECHNICAL ENTREPRENEURSHIP

    2021

  • SPECIAL LECTURES 1

    2021

  • RESEARCH ON SYSTEM DESIGN AND MANAGEMENT

    2021

  • RESEARCH ON PROJECT DESIGN AND MANAGEMENT

    2021

display all >>

Courses Previously Taught 【 Display / hide

  • SPECIAL LECTURES 1

    Keio University, 2017, Spring Semester, Major subject, Lecture, Within own faculty, 1h, 50people

  • HUMAN RELATIONS

    Keio University, 2017, Autumn Semester, Major subject, Lecture, Lecturer outside of Keio, 1h, 20people

  • COMMUNICATIONS

    Keio University, 2017, Autumn Semester, Major subject, Seminar, Lecturer outside of Keio, 1h, 10people

  • MANAGEMENT AND FINANCIAL STRATEGY

    Keio University, 2017, Autumn Semester, Major subject, Lecture, Lecturer outside of Keio, 1h, 30people

  • PROGRAM MANAGEMENT

    Keio University, 2017, Autumn Semester, Major subject, Lecture, Lecturer outside of Keio, 1h, 20people

display all >>

 

Social Activities 【 Display / hide

  • PMI (Project Management Institute)

     
  • POFコンソーシアム

     
  • ICPOF (International Cooperative of Plastic Optical Fiber)

     

Memberships in Academic Societies 【 Display / hide

  • PMI (Project Management Institute), 

    2008.02
    -
    Present
  • Japan Creativity Society, 

    2017.04
    -
    Present
  • The Japan Association of Regional Development and Vitalization, 

    2017.04
    -
    Present
  • JTTA (Japanese Telemedicine and Telecare Association), 

    2011.07
    -
    Present
  • JSME (The Japan Society for Medical Education), 

    2012.07
    -
    Present

display all >>

Committee Experiences 【 Display / hide

  • 2010.04
    -
    Present

    副所長, 慶應義塾大学理工学部附属フォトニクス・リサーチ・インスティテュート

  • 2009.04
    -
    Present

    幹事(副会長), POFコンソーシアム

  • 2010.01
    -
    2017.12

    International Committee Member, ICPOF (International Cooperative of Plastic Optical Fiber)

  • 2020.01
    -
    2022.12

    Director, Japan Creativity Society

  • 2019.01
    -
    2019.12

    Chair of Program Committee, POF2019

display all >>