研究者詳細 - 金澤　秀子

論文 - 金澤　秀子

分割表示 224 件中 1 - 20 件目／全件表示 >>

Temperature-modulated interactions between thermoresponsive strong cationic copolymer-brush-grafted silica beads and biomolecules

Nagase K., Suzuki S., Kanazawa H.

Heliyon 10 （ 15 ） e34668 2024年08月

ISSN 24058440

Thermoresponsive polymer brushes have attracted considerable research attention owing to their unique properties. Herein, we developed silica beads grafted with poly(N-isopropylacrylamide (NIPAAm)-co-3-acrylamidopropyl trimethylammonium chloride (APTAC)-co-tert-butyl acrylamide (tBAAm) and P(NIPAAm-co-APTAC-co-n-butyl methacrylate(nBMA)) brushes. The carbon, hydrogen, and nitrogen elemental analysis of the copolymer-grated silica beads revealed the presence of a large amount of the grafted copolymer on the silica beads. The electrostatic and hydrophobic interactions between biomolecules and prepared copolymer brushes were analyzed by observing their elution behaviors via high-performance liquid chromatography using the copolymer-brush-modified beads as the stationary phase. Adenosine nucleotides were retained in the bead-packed columns, which was attributed to the electrostatic interaction between the copolymers and adenosine nucleotides. Insulin was adsorbed on the copolymer brushes at high temperatures, which was attributed to its electrostatic and hydrophobic interactions with the copolymer. Similar adsorption behavior was observed in case of albumin. Further, at a low concentration of the phosphate buffer solution, albumin was adsorbed onto the copolymer brushes even at relatively low temperatures owing to its enhanced electrostatic interaction with the copolymer. These results indicated that the developed thermoresponsive strong cationic copolymer brushes can interact with peptides and proteins through a combination of electrostatic and temperature-modulated hydrophobic interactions. Thus, the developed copolymer brushes exhibits substantial potential for application in chromatographic matrices for the analysis and purification of peptides and proteins.

Access to Document (DOI)

Thermoresponsive mixed polymer brush to effectively control the adhesion and separation of stem cells by altering temperature

Nagase K., Wakayama H., Matsuda J., Kojima N., Kanazawa H.

Materials Today Bio 20 100627 2023年06月

During the last few decades, thermoresponsive materials for modulating cell adhesion have been investigated for the application of tissue engineering. In this study, we developed thermoresponsive mixed polymer brushes consisting of poly(N-isopropylacrylamide) (PNIPAAm) and poly(N,N-dimethylaminopropylacrylamide) (PDMAPAAm). The mixed polymer brushes were prepared on a glass substrate via the reversible addition-fragmentation chain transfer polymerization of DMAPAAm and subsequent atom transfer radical polymerization of NIPAAm. The mixed polymer brushes grafted to glass exhibited increased cationic properties by increasing the grafted PDMAPAAm length. The shrinking and extension of PNIPAAm exposed and concealed PDMAPAAm, respectively, indicating that the surface cationic properties can be controlled by changing the temperature. At 37 °C, the prepared mixed polymer brushes enhanced cell adhesion through their electrostatic interactions with cells. They also exhibited various thermoresponsive adhesion and detachment properties using various types of cells, such as mesenchymal stem cells. Temperature-controlled cell adhesion and detachment behavior differed between cell types. Using the prepared mixed polymer brush, we separated MSCs from adipocytes and HeLa cells by simply changing the temperature. Thus, the thermoresponsive mixed polymer brushes may be used to separate mesenchymal stem cells from their differentiated or contaminant cells by altering the temperature.

Access to Document (DOI)

Real-time in situ X-ray micro-computed tomography study of the effect of impurities on the crystallization of amorphous nifedipine

Amano Y., Misawa T., Miyazaki T., Ando D., Koide T., Izutsu K.i., Kanazawa H., Hanaoka K., Yamamoto E.

Journal of Pharmaceutical and Biomedical Analysis 226 115248 2023年03月

ISSN 07317085

Controlling the physical stability of noncrystalline active pharmaceutical ingredients remains a major challenge in the development of amorphous formulations such as amorphous solid-dispersion (ASD) formulations. To establish new evaluation and formulation strategies, the spatial distribution of the crystal phase in bulk amorphous nifedipine (NFD) was investigated as a model. The crystallization of amorphous NFD and the effect of a deliberately added impurity were investigated using powder X-ray diffraction (PXRD), differential scanning calorimetry and real-time in situ X-ray micro-computed tomography (X-ray CT). The stability data of amorphous samples, i.e., NFD and a mixture of NFD with an oxidative degradation product of NFD, impurity A (Imp A), at a weight ratio of 90:10, presented as percent amorphous remaining, suggests that Imp A accelerates the bulk crystal growth of NFD. Real-time in situ X-ray CT results showed surface-enhanced crystal growth and cavity formation in solid NFD samples. Moreover, the crystals were heterogeneous in density. These results suggest that Imp A affects the physical stability of the amorphous NFD. X-ray CT equipped with a heating unit can aid in-situ evaluation and assessment of physicochemical properties and physical stability of amorphous samples and formulations.

Access to Document (DOI)

Thermoresponsive bio-affinity interfaces for temperature-modulated selective capture and release of targeted exosomes

Nagase K., Yamazaki K., Maekawa Y., Kanazawa H.

Materials Today Bio 18 100521 2023年02月

The existing methods for exosome isolation, such as ultracentrifugation, size exclusion, and affinity separation, suffer from some limitations. Herein, we aimed to develop temperature-modulated exosome-capturing materials using thermoresponsive polymers and peptides with affinity for exosomes. Poly(2-hydroxyethyl methacrylate-co-propargyl acrylate)-b-poly(N-isopropylacrylamide) (P(HEMA-co-PgA)-b-PNIPAAm) was grafted on silica beads via a two-step process of activator regenerated by electron transfer atom transfer radical polymerization. Peptides with affinity for exosomes were conjugated to the propargyl group of the bottom P(HEMA-co-PgA) segment of the copolymer via a click reaction. The prepared copolymer-grafted beads were characterized by elemental analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, gel permeation chromatography, and the turbidity of the polymer solution. Results indicated that the copolymer and peptide were successfully modified on the silica beads. Exosomes from SK-BR-3 cells, a human breast cancer cell line, were selectively captured on the prepared beads at 37 °C, as the upper PNIPAAm segment shrank and the affinity between the peptide and exosome was enhanced. Upon lowering the temperature to 4 °C, the captured exosomes were released from the copolymer brush because of the extension of the PNIPAAm segment that reduced the affinity between peptides and exosomes. These findings demonstrated that the prepared copolymer brush-grafted silica beads can capture and release targeted exosomes via temperature modulation. Taken together, the developed copolymer brush-grafted silica beads would be useful for the separation of exosomes using simple procedures such as temperature modulation.

Access to Document (DOI)

Two-dimensional temperature-responsive chromatography using a poly(N-isopropylacrylamide) brush-modified stationary phase for effective therapeutic drug monitoring

Nagase K., Inoue S., Inoue M., Kanazawa H.

Scientific Reports 12 （ 1 ） 2653 2022年12月

Therapeutic drug monitoring (TDM) is an effective pharmacological approach for controlling drug concentration in a patient’s serum. Herein, a new two-dimensional chromatography system was developed using two poly(N-isopropylacrylamide) (PNIPAAm)-modified bead-packed columns for effective and safe drug monitoring. PNIPAAm-modified silica beads were prepared as packing materials using atom transfer radical polymerization of NIPAAm. The increase in the retention times of the drugs requiring TDM with increasing temperature, was attributed to enhanced hydrophobic interactions at elevated temperatures. The drugs and serum proteins were separated on the prepared column at 40 °C using an all-aqueous mobile phase. Differences in the hydrophobic interactions accounted for the elution of the serum proteins and drugs at short and long retention times, respectively, and a primary column was employed to separate the serum proteins and drugs. After eluting the serum proteins from the column, the drug was introduced into the secondary column, leading to a peak of its purified form and enabling determination of the drug concentration. Two-dimensional temperature-responsive chromatography can benefit TDM by allowing the drug concentration in the serum to be measured in all-aqueous mobile phases without sample preparation.

Access to Document (DOI)

Temperature-responsive mixed-mode column for the modulation of multiple interactions

Nagase K., Matsumoto K., Kanazawa H.

Scientific Reports 12 （ 1 ） 4434 2022年12月

In this study, mixed-mode chromatography columns have been investigated using multiple analyte interactions. A mixed-mode chromatography column was developed using poly(N-isopropylacrylamide) (PNIPAAm) brush-modified silica beads and poly(3-acrylamidopropyl trimethylammonium chloride) (PAPTAC) brush-modified silica beads. PNIPAAm brush-modified silica beads and PAPTAC brush-modified silica beads were prepared by atom transfer radical polymerization. The beads were then packed into a stainless-steel column in arbitrary compositions. The elution studies evaluated the column performance on hydrophobic, electrostatic, and therapeutic drug samples using steroids, adenosine nucleotide, and antiepileptic drugs as analytes, respectively. Steroids exhibited an increased retention time when the column temperature was increased. The retention of adenosine nucleotides increased with the increasing composition of the PAPTAC-modified beads in the column. The antiepileptic drugs were separated using the prepared mixed-mode columns. An effective separation of antiepileptic drugs was observed on a 10:1 PNIPAAm:PAPTAC column because the balance between the hydrophobic and electrostatic interactions with antiepileptic drugs was optimized for the bead composition. Oligonucleotides were also separated using mixed-mode columns through multiple hydrophobic and electrostatic interactions. These results demonstrate that the developed mixed-mode column can modulate multiple hydrophobic and electrostatic interactions by changing the column temperature and composition of the packed PNIPAAm and PAPTAC beads.

Access to Document (DOI)

Chromatography columns packed with thermoresponsive-cationic-polymer-modified beads for therapeutic drug monitoring

Nagase K., Takagi H., Nakada H., Ishikawa H., Nagata Y., Aomori T., Kanazawa H.

Scientific Reports 12 （ 1 ） 12847 2022年12月

Therapeutic drug monitoring, which is used to determine appropriate drug doses, is critical in pharmacological therapy. In this study, we developed thermoresponsive chromatography columns with various cationic properties for effective therapeutic drug monitoring. Thermoresponsive cationic copolymer poly(N-isopropylacrylamide-co–n-butyl methacrylate-co–N,N-dimethylaminopropyl acrylamide) (P(NIPAAm-co-BMA-co-DMAPAAm))-modified silica beads, which were used as the chromatographic stationary phase, were prepared by modifying the radical initiator of the silica beads, followed by radical polymerization. Characterization of the prepared silica beads demonstrated that thermoresponsive polymers with various cationic properties successfully modified the beads. The elution behavior of several steroids in the prepared bead-packed columns at various temperatures indicated that the optimal column operating temperature was 30 °C. Appropriate measurement conditions for 13 drugs were investigated by varying the cationic properties of the columns and the pH of the mobile phase. Drug concentrations in serum samples were determined using the developed columns and mobile phases with a suitable pH. Voriconazole concentrations in human serum samples were determined using the developed columns with all-aqueous mobile phases. We anticipate that the developed chromatography columns can be used for therapeutic drug monitoring because drug concentrations can be measured using all-aqueous mobile phases that are suitable in clinical settings.

Access to Document (DOI)

Actin cable formation and epidermis–dermis positional relationship during complete skin regeneration

Takaya K., Okabe K., Ishigami A., Imbe Y., Kanazawa H., Sakai S., Aramaki-Hattori N., Kishi K.

Scientific Reports 12 （ 1 ） 15913 2022年12月

Up to a certain developmental stage, a fetus can completely regenerate wounds in the skin. To clarify the mechanism of fetal skin regeneration, identifying when the skin switches from fetal-type wound regeneration to adult-type wound repair is necessary. We hypothesized that this switch occurs at several time points and that complete skin regeneration requires epidermal–dermal interactions and the formation of actin cables. We compared normal skin and wound morphology at each developmental stage. We examined two parameters: epidermal texture and dermal structure. We found that the three-dimensional structure of the skin was completely regenerated in full-thickness skin incisions made before embryonic day (E) 13. However, the skin texture did not regenerate in wounds made after E14. We also found that the dermal structure regenerates up to E16, but wounds created after E17 heal as scars with dermal fibrosis. By controlling the activity of AMP-activated protein kinase and altering actin cable formation, we could regulate scar formation in utero. These findings may contribute to therapies that allow complete skin regeneration without scarring.

Access to Document (DOI)

A thermoresponsive cationic block copolymer brush-grafted silica bead interface for temperature-modulated separation of adipose-derived stem cells

Nagase K., Okada A., Matsuda J., Ichikawa D., Hattori Y., Kanazawa H.

Colloids and Surfaces B: Biointerfaces 220 112928 2022年12月

ISSN 09277765

Adipose-derived mesenchymal stem cells (ADSCs) have beneficial effects in cell transplantation therapy; these cells are collected from adipose tissue using low-invasive methods. However, to prepare ADSCs for cell therapy, a cell separation method that neither involves modification of the cell surface nor causes loss of cell activity is needed. Here, we aimed to develop ADSC separation columns using thermoresponsive cationic block copolymer brush-grafted beads as packing materials. The block copolymer brush was formed by a bottom cationic segment, poly(N,N-dimethylaminopropylacrylamide) (PDMAPAAm), and an upper thermoresponsive segment, poly(N-isopropylacrylamide) (PNIPAAm), and was grafted in two atom transfer radical polymerization reactions. The copolymer brush-grafted silica beads were packed into a column. An ADSC suspension was introduced into the columns at 37 °C and adsorbed on the copolymer brush-modified beads through electrostatic and hydrophobic interactions with the PDMAPAAm and PNIPAAm segments, respectively. The adsorbed ADSCs eluted from the column by lowering the temperature to 4 °C. In contrast, most Jurkat and vascular endothelial cells eluted at 37 °C, because of the relatively weaker electrostatic interactions with the block copolymer brush compared to ADSCs. Using the prepared column, a mixture of ADSCs and Jurkat cells was separated by changing the column temperature. The recovered ADSCs exhibited cell activity. The developed cell separation column may be useful for isolating ADSCs without cell surface modification, while maintaining cell activity.

Access to Document (DOI)

Temperature-modulated antibody drug separation using thermoresponsive mixed polymer brush-modified stationary phase

Nagase K., Ishii S., Takeuchi A., Kanazawa H.

Separation and Purification Technology 299 2022年10月

ISSN 13835866

Recently, antibody drugs have been investigated for medical treatments of intractable diseases. An effective antibody drug separation method is in demand for production of such drugs. We developed an antibody drug separation material using a mixed polymer brush composed of poly(N-isopropylacrylamide) (PNIPAAm), which is a thermoresponsive polymer, and poly(4-vinylpyridine) (P4VP), which is an antibody-affinity polymer, for temperature modulation and adsorption of the antibody drug rituximab that results in its separation. A mixed polymer brush was prepared on silica bead surfaces by radical polymerization to modify P4VP, followed by atom transfer radical polymerization to modify PNIPAAm. The prepared mixed polymer brush was characterized by CHN elemental analysis, chloride analysis, nitrogen adsorption, thermogravimetric analysis, differential thermal analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and zeta potential measurement. Temperature-modulated adsorption of rituximab on the mixed polymer brush was achieved by concealing and exposing P4VP through the extension and shrinkage of PNIPAAm in the brush, and was investigated using mixed polymer brush-modified silica beads as chromatographic packing materials. By utilizing the specific properties of mixed polymer brushes, rituximab and bovine serum albumin could be separated by simply changing the column temperature. Thus, the mixed polymer brush-modified beads prepared in this study may be useful for purifying rituximab by changing the temperature.

Access to Document (DOI)

Thermoresponsive block copolymer brush for temperature-modulated hepatocyte separation

Nagase K., Kojima N., Goto M., Akaike T., Kanazawa H.

Journal of Materials Chemistry B 10 （ 42 ） 8629 - 8641 2022年08月

ISSN 2050750X

Hepatic tissue engineering may be an effective approach for the treatment of liver disease; however, its practical application requires hepatic cell separation technologies that do not involve cell surface modification and maintain cell activity. In this study, we developed hepatocyte cell separation materials using a thermoresponsive polymer and a polymer with high affinity to hepatocytes. A block copolymer of poly(N-p-vinylbenzyl-O-β-d-galactopyranosyl-(1→4)-d-gluconamide) (PVLA) and poly(N-isopropylacrylamide) (PNIPAAm) [PVLA-b-PNIPAAm] was prepared through two steps of atom transfer radical polymerization. On the prepared PVLA-b-PNIPAAm brush, HepG2 cells (model hepatocytes) adhered at 37 °C and detached at 20 °C, attributed to the temperature-modulated affinity between PVLA and HepG2. Cells from the immortalized human hepatic stellate cell line (TWNT-1) did not adhere to the copolymer brush, and RAW264.7 cells (mouse macrophage; model Kupffer cells) adhered to the copolymer brush, regardless of temperature. Using the difference in cell adhesion properties on the copolymer brush, temperature-modulated cell separation was successfully demonstrated. A mixture of HepG2, RAW264.7, and TWNT-1 cells was seeded on the copolymer brush at 37 °C for adherence. By reducing the temperature to 20 °C, adhered HepG2 cells were selectively recovered with a purity of approximately 85% and normal activity. In addition, induced pluripotent stem (iPS) cell-derived hepatocytes adhered on the PVLA-b-PNIPAAm brush at 37 °C and detached from the copolymer brush at 20 °C, whereas the undifferentiated iPS cells did not adhere, indicating that the prepared PVLA-b-PNIPAAm brush could be utilized to separate hepatocyte differentiated and undifferentiated cells. These results indicated that the newly developed PVLA-b-PNIPAAm brush can separate hepatic cells from contaminant cells by temperature modulation, without affecting cell activity or modifying the cell surface. Thus, the copolymer brush is expected to be a useful separation tool for cell therapy and tissue engineering using hepatocytes.

Access to Document (DOI)

Role of Wnt Signaling in Mouse Fetal Skin Wound Healing

Takaya K., Sunohara A., Aramaki-hattori N., Sakai S., Okabe K., Kanazawa H., Asou T., Kishi K.

Biomedicines 10 （ 7 ） 2022年07月

ISSN 2227-9059

Wnt proteins secrete glycoproteins that are involved in various cellular processes to main-tain homeostasis during development and adulthood. However, the expression and role of Wnt in wound healing have not been fully documented. Our previous studies have shown that, in an early-stage mouse fetus, no scarring occurred after cutaneous wounding, and complete regeneration was achieved. In this study, the expression and localization of Wnt proteins in a mouse fetal-wound-healing model and their associations with scar formation were analyzed. Wnt-related molecules were detected by in-situ hybridization, immunostaining, and real-time polymerase chain reaction. The results showed altered expression of Wnt-related molecules during the wound-healing process. Moreover, scar formation was suppressed by Wnt inhibitors, suggesting that Wnt signaling may be involved in wound healing and scar formation. Thus, regulation of Wnt signaling may be a possible mechanism to control scar formation.

Access to Document (DOI)

Viral vector purification with thermoresponsive-anionic mixed polymer brush modified beads-packed column

Nagase K., Kitazawa S., Kogure T., Yamada S., Katayama K., Kanazawa H.

Separation and Purification Technology 286 2022年04月

ISSN 13835866

Viral vectors have attracted attention as a potential new therapeutic modality for gene therapy. In this study, we developed a temperature-modulated viral vector purification column using a mixed polymer brush composed of thermoresponsive and anionic polymers as packing material ligands. The mixed polymer brushes were modified on silica beads using a combination of reversible addition − fragmentation chain transfer (RAFT) polymerization of 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and subsequent atom transfer radical polymerization (ATRP) of N-isopropylacrylamide (NIPAAm). The temperature-modulated zeta potential change in the prepared mixed polymer brush was attributed to the PNIPAAm shrinking and exposing of PAMPS. The prepared mixed polymer brush modified beads were used as packing materials, and the elution behavior of the adeno associated virus type 2 (AAV2) vector was observed. The AAV2 vector was adsorbed on the mixed polymer brush by electrostatic and hydrophobic interactions at 40 °C. By reducing the temperature to 5 °C, adsorbed AAV2 vector on the mixed polymer brush was desorbed and eluted from the column due to lowering the electrostatic and hydrophobic interactions between the AAV2 vector and mixed polymer brush. The AAV2 vector was separated from bovine serum proteins as a contaminant using the column. The ability to infect cells was maintained by the recovered AAV2 vectors from the column. Thus, the developed column would be beneficial for the simple purification of viral vectors.

Access to Document (DOI)

Temperature responsive chromatography for therapeutic drug monitoring with an aqueous mobile phase

Nagase K., Nishiyama T., Inoue M., Kanazawa H.

Scientific Reports 11 （ 1 ） 23508 2021年12月

Therapeutic drug monitoring is a key technology for effective pharmacological treatment. In the present study, a temperature-responsive chromatography column was developed for safe and simple therapeutic drug monitoring without the use of organic solvents. Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel-modified silica beads were prepared via a condensation reaction and radical polymerization. The temperature-dependent elution behavior of the drugs was observed using a PNIPAAm-modified silica-bead packed column and an all-aqueous mobile phase. Sharp peaks with reproducible retention times were observed at temperatures of 30 °C or 40 °C because the PNIPAAm hydrogel on the silica beads shrinks at these temperatures, limiting drug diffusion into the PNIPAAm hydrogel layer. The elution behavior of the sample from the prepared column was examined using a mixture of serum and model drugs. The serum and drugs were separated on the column at 30 °C or 40 °C, and the concentration of the eluted drug was obtained using the calibration curve. The results show that the prepared chromatography column would be useful for therapeutic drug monitoring because the drug concentration in serum can be measured without using organic solvents in the mobile phase and without any need for sample preparation.

Access to Document (DOI)

Thermally-modulated cell separation columns using a thermoresponsive block copolymer brush as a packing material for the purification of mesenchymal stem cells

Nagase K., Edatsune G., Nagata Y., Matsuda J., Ichikawa D., Yamada S., Hattori Y., Kanazawa H.

Biomaterials Science 9 （ 21 ） 7054 - 7064 2021年11月

ISSN 20474830

Cell therapy using mesenchymal stem cells (MSCs) is used as effective regenerative treatment. Cell therapy requires effective cell separation without cell modification and cellular activity reduction. In this study, we developed a temperature-modulated mesenchymal stem cell separation column. A temperature-responsive cationic block copolymer, poly(N,N-dimethylaminopropylacrylamide)-b-poly(N-isopropylacrylamide)(PDMAPAAm-b-PNIPAAm) brush with various cationic copolymer compositions, was grafted onto silica beads via two-step atom transfer radical polymerization. Using the packed beads, the elution behavior of the MSCs was observed. At 37 °C, the MSCs were adsorbed onto the column via both hydrophobic and electrostatic interactions with the PNIPAAm and PDMAPAAm segments of the copolymer brush, respectively. By reducing the temperature to 4 °C, the adsorbed MSCs were eluted from the column by reducing the hydrophobic and electrostatic interactions attributed to the hydration and extension of the PNIPAAm segment of the block copolymer brush. From the temperature-modulated adsorption and elution behavior of MSCs, a suitable DMAPAAm composition of the block copolymer brush was determined. Using the column, a mixture of MSC and BM-CD34+ cells was separated by simply changing the column temperature. The column was used to purify the MSCs, with purities of 78.2%, via a temperature change from 37 °C to 4 °C. Additionally, the cellular activity of the MSCs was retained throughout the column separation step. Overall, the obtained results show that the developed column is useful for MSC separation without cell modification and cellular activity reduction. This journal is

Access to Document (DOI)

Anion species-triggered antibody separation system utilizing a thermo-responsive polymer column under optimized constant temperature

Nomoto D., Nagase K., Nakamura Y., Kanazawa H., Citterio D., Hiruta Y.

Colloids and Surfaces B: Biointerfaces 205 111890 2021年09月

研究論文（学術雑誌）, 共著, 査読有り, ISSN 0927-7765

Although the field of antibody drugs has grown larger, the antibody production still faces several challenges. Effective antibody purification is required, but the conventional purification method for antibodies is cost intensive and often causes aggregation problems, indicating the need for new alternative antibody purification methods. In the present study, a constant temperature antibody purification system for use with a thermo-responsive polymer column was developed based on switching of anion species in eluents. By adjusting the temperature for each antibody, the developed column enabled separation of the therapeutic monoclonal antibodies, rituximab and trastuzumab, from contaminants without changing salt concentration or pH of the eluents. The thermo-responsive hydrogel-modified column packing material was synthesized by introducing n-butyl methacrylate, acrylic acid, N,N′-methylenebisacrylamide and N-isopropylacrylamide to the surface of silica beads with an initiator by a graft-from approach. Elution behavior of antibodies with three types of anions, such as citrate, phosphate, and chloride were tested under three different temperature conditions. It was demonstrated that the thermo-responsive hydrogel grafted column showed a switchable antibody retention behavior at constant temperature and salt concentration, with antibody adsorption by NaCl eluent and desorption by citric acid buffer eluent.

Access to Document (DOI)

Temperature-responsive spin column for sample preparation using an all-aqueous eluent

Nagase K., Ishizawa Y., Inoue M., Kokubun M., Yamada S., Kanazawa H.

Analytica Chimica Acta 1179 338806 2021年09月

研究論文（学術雑誌）, 共著, 査読有り, ISSN 0003-2670

We present a temperature-responsive spin column using an all-aqueous eluent. The method is intended as a simple sample preparation method for protein removal from serum, which is required for serum drug analysis. As packing materials for the spin column, we prepared two types of silica beads via surface-initiated radical polymerization. The large beads (diameter, 40–63 μm) were grafted with a temperature-responsive cationic copolymer, poly(N-isopropylacrylamide-co-N,N-dimethylaminopropyl acrylamide-co-n-butyl methacrylate) (P(NIPAAm-co-DMAPAAm-co-BMA)), and the small beads (diameter, 5 μm) were grafted with a temperature-responsive hydrophobic copolymer, P(NIPAAm-co-BMA). The beads were packed into the spin column as a double layer: P(NIPAAm-co-BMA) silica beads on the bottom and P(NIPAAm-co-DMAPAAm-co-BMA) silica beads on the top. The sample purification efficacy of the prepared spin column was evaluated on a model sample analyte (the antifungal drug voriconazole mixed with blood serum proteins). At 40 °C, the serum proteins and voriconazole were adsorbed on the prepared spin column via hydrophobic and electrostatic interactions. When the temperature was decreased to 4 °C, the adsorbed voriconazole was eluted from the column with the pure water eluent, while the serum proteins remained in the column. This temperature-responsive spin column realizes sample preparation simply by changing the temperature.

Access to Document (DOI)

Discrimination of ranitidine hydrochloride crystals using X-ray micro-computed tomography for the evaluation of three-dimensional spatial distribution in solid dosage forms

Yamamoto E., Takeda Y., Ando D., Koide T., Amano Y., Miyazaki S., Miyazaki T., Izutsu K.i., Kanazawa H., Goda Y.

International Journal of Pharmaceutics 605 120834 2021年08月

ISSN 03785173

A non-destructive discrimination method for crystals in solid dosage drug forms was first developed using a combination of Raman spectroscopy and X-ray micro-computed tomography (X-ray CT). Identification of the crystal form of an active pharmaceutical ingredient (API) at the appropriate pharmaceutical dosage is crucial, as the crystal form is a determinant of the quality and performance of the final formulation. To develop a non-destructive analytical methodology for the discrimination of solid API crystals in a solid dosage form, we utilized a combination of Raman spectroscopy and X-ray CT to differentiate between ranitidine crystal polymorphs (forms 1 and 2) in tablet formulations containing three excipients. The difference in electron density correlated with the true density between ranitidine polymorphs, thereby enabling the discrimination of crystal forms and visualization of their three-dimensional spatial localization inside the tablets through X-ray CT imaging. Furthermore, X-ray CT imaging revealed that the crystal particles were of varying densities, sizes, and shapes within the same batch. These findings suggest that X-ray CT is not only an imaging tool but also a unique method for quantitative physicochemical characterization to study crystal polymorphs and solid dosage forms.

Access to Document (DOI)

Effect of pore diameter on the elution behavior of analytes from thermoresponsive polymer grafted beads packed columns

Nagase K., Umemoto Y., Kanazawa H.

Scientific Reports 11 （ 1 ） 9976 2021年05月

研究論文（学術雑誌）, 共著, 査読有り

Temperature-responsive chromatography using thermoresponsive polymers is innovative and can control analyte retention via column temperature. Analyte elution behavior in this type of chromatography depends on the modified thermoresponsive polymer and the structure of the base materials. In the present study, we examine the effect of the pore diameter of silica beads on analyte elution behavior in temperature-responsive chromatography. Poly(N-isopropylacrylamide-co-n-butyl methacrylate) hydrogel was applied to beads of various pore sizes: 7, 12, and 30 nm. Almost the same amount of copolymer hydrogel was applied to all beads, indicating that the efficiency of copolymer modification was independent of pore size. Analyte retention on prepared beads in a packed column was observed using steroids, benzodiazepines, and barbiturates as analytes. Analyte retention times increased with temperature on packed columns of 12- and 30-nm beads, whereas the column packed with 7-nm beads exhibited decreased retention times with increasing temperature. The difference in analyte elution behavior among the various pore sizes was attributed to analyte diffusion into the bead pores. These results demonstrate that bead pore diameter determines temperature-dependent elution behavior.

Access to Document (DOI)

Selective capture and non-invasive release of cells using a thermoresponsive polymer brush with affinity peptides

Nagase K., Shimura M., Shimane R., Hanaya K., Yamada S., Akimoto A.M., Sugai T., Kanazawa H.

Biomaterials Science 9 （ 3 ） 663 - 674 2021年01月

研究論文（学術雑誌）, 共著, 査読有り, ISSN 2047-4830

Tissue engineering and cell transplantation therapy have become promising therapies for intractable diseases. These approaches require cell separation technology without cell modification. Accordingly, in this study, we developed a novel cell separation method using a thermoresponsive block copolymer brush with an affinity peptide. A block copolymer brush with bottom poly(2-hydroxyethyl methacrylate [HEMA]-co-propargyl acrylate) and top poly(N-isopropylacrylamide-co-HEMA) segments was prepared through two steps of atom transfer radical polymerization. Then, cell affinity peptides were conjugated to the bottom segment of the copolymer brush through a click reaction. Using cRGD as a cell-Affinity peptide, enhancement of cell adhesion with rapid adhesion on the copolymer brush was observed at 37 °C, whereas the copolymer brush without cRGD did not exhibit cell adhesion. Temperature-modulated cell adhesion and detachment were performed with a relatively long upper segment because the affinity between peptides and cells was modulated by the swelling and shrinking of the upper thermoresponsive segment. Selective endothelial cell adhesion was performed at 37 °C using GGGREDV as an affinity peptide. Smooth muscle cells and fibroblasts did not adhere to the copolymer brush. Adhered human umbilical vein endothelial cells (HUVECs) were successfully recovered by reducing the temperature to 20 °C. Based on the properties of the copolymer brush, HUVECs could be purified using a mixture of cells simply by changing the temperature. These results demonstrated that the prepared copolymer brush with cell affinity peptides could be a useful cell separation tool because the cells could be separated with specificity and without cell modification using a simple procedure.

Access to Document (DOI)

　前のページ - 次のページ　

金澤 秀子

論文 - 金澤 秀子

金澤　秀子

論文 - 金澤　秀子