Presentations -
-
Sensor-less chatter vibration monitoring by mechanical power factor
T. Hirano, Y. Yamada, Y. Kakinuma
The 8th International Conference on Leading Edge Manufacturing in 21st Century,
2015.10,Oral presentation (general)
-
Sensorless cutting force estimation in large scale ball-screw-driven machine tool
Y. Yamada, Y. Kakinuma, T. Ito, J. Fujita , A. Tada, M. Sagara
ISAAT2015,
2015.10,Oral presentation (general)
-
Identification of stable spindle rotation in milling with disturbance observer
R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi
38th International MATADOR Conference,
2015.03,Oral presentation (general)
-
Helical milling of carbon fiber reinforced plastics using ultrasonic vibration and liquid nitrogen
T. Ishida; K. Noma; Y. Kakinuma; T. Aoyama; S. Hamada; H. Ogawa; T. Higaino
New production technologies in aerospace industry - 5th machining innovations conference (MIC 2014), Procedia CIRP,
2014.11,Oral presentation (general)
-
Tool collision detection in high-speed feeding based on disturbance observer
Ryo Koike; Yasuhiro Kakinuma; Tojiro Aoyama; Kouhei Ohnishi
Procedia CIRP,
2014.06,Oral presentation (general)
-
Cryogenic microshaping of viscoelastic polymer with single point diamond tool
Shun Yoshikawa; Yasuhiro Kakinuma; Yohei Sato; Tojiro Aoyama
Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014,
2014.06,Oral presentation (general)
-
High-precision and high-efficiency micromachining of chemically strengthened glass using ultrasonic vibration
Kazuki Noma; Yu Takeda; Tojiro Aoyama; Yasuhiro Kakinuma; Seiji Hamada
Procedia CIRP,
2014.06,Oral presentation (general)
-
Influence of cutting force and tool geometry on whole quality in glass microdrilling
M. Onozawa; R. Koike; Y. Murakami; Y. Kakinuma; T. Aoyama
Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014,
2014.06 -
Experimental analysis of the surface integrity of single-crystal calcium fluoride caused by ultra-precision turning
Shunya Azami; Kudo Hiroshi; Takasumi Tanabe; Jiwang Yan; Yasuhiro Kakinuma
Procedia CIRP,
2014.05,Oral presentation (general)
-
Sensor-less Tool Fracture Detection Applying Disturbance Observer Theory
R. Koike, Y. Kakinuma, T. Aoyama
International Conference on Precision Engineering (ICPE2012) (Awaji Japan) ,
2012.11,Oral presentation (general), 精密工学会
-
Enhancement of Sensor-less Tool Fracture Detection Method Applying Rotational Digital Filter
R. Koike, Y. Kakinuma, T. Aoyama
3rd CIRP International Conference on Process Machine Interactions (PMI2012) (Nagoya Japan) ,
2012.10,Oral presentation (general), CIRP
-
Development of the tool contact stiffness monitoring method in buffing with the intelligent polishing machine
K.Igarashi, Y.Kakinuma, T.Arai, E.Uchishiba, M.Murakami, T.Sagara
9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012) (Prague Czech Republic) ,
2012.09,Oral presentation (general)
-
Cutting force monitoring in ball screw driven stage by inner sensor fusion
H. Miyazaki, R. Kumakura, Y. Kakinuma
9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012) (Prague Czech Republic) ,
2012.09,Oral presentation (general)
-
Basic Research on the Seismic Damper Applying Electro-Adhesive Gel
H. Iwashina, T. Aoyama, H.Anzai, K. Sakurai, Y. Kakinuma
13th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Ankara Turkey) ,
2012.07,Oral presentation (general)
-
External sensor-less tool contact detection by cutting force observer
Y. Kakinuma, T. Kamigochi
1st CIRP Global Web Conference on Interdisciplinary Research in Production Engineering (International web conference) ,
2012.06,Oral presentation (general), CIRP
-
Disturbance Observer–Based In-process Detection and Suppression of Chatter Vibration
T. Yoneoka, Y. Kakinuma, K. Ohnishi, T. Aoyama
5th CIRP Conference on High Performance Cutting 2012 (Zurich, Switzerland) ,
2012.05,Oral presentation (general), CIRP
-
Ultrasonic Vibration and Cavitation-aided Micromachining of Hard and Brittle Materials
R. Tsuboi, Y. Kakinuma, T. Aoyama, H. Ogawa, S. Hamada
5th CIRP Conference on High Performance Cutting 2012 (Zurich, Switzerland) ,
2012.05,Oral presentation (general), CIRP
-
Basic study on Ultraprecision machining of Single-crystal Calcium Fluoride
Y. Mizumoto, Y. Kakinuma, T. Aoyama
1st CIRP Conference on Surface Integrity (Bremen, Germany) ,
2012.01,Oral presentation (general), CIRP
-
Development of an intelligent stage with sensor-less cutting force and torque monitoring function
T.Kamigochi, Y. Kakinuma
The 6th International Conference on Leading Edge Manufacturing in 21st Century (Saitama, Japan) ,
2011.11,Oral presentation (general), JSME
-
Basic performance evaluation of Electro-adhesive film with micro mesh sheet
T. Kubo, Y. Kakinuma
Asian Symposium for Precision Engineering and Nanotechnology 2011 (Hongkong, China) ,
2011.11,Oral presentation (general)
-
Shear Angle Monitoring applying cutting force observer in turning
M. Takei, Y. Kakinuma
The 6th International Conference on Leading Edge Manufacturing in 21st Century (Saitama, Japan) ,
2011.11,Oral presentation (general), JSME
-
A Study on the Cryogenic Micromachining and its Application for Extended Nano Space Fabrication
S.Kidani, Y.Mizumoto, K.Sakai, Y.Sato, Y.Kakinuma
International Symposium on Green Manufacturing 2011 (Soul, Korea) ,
2011.10,Oral presentation (general)
-
Shear Angle Control Method in Turning applying Cutting Force Observer
M. Takei, Y. Kakinuma
the 11th international Conference of the European Society for Precision Engineering & Nanotechnology (Como, Italy) ,
2011.05,Poster presentation, European Society for Precision Engineering & Nanotechnology
-
Evaluation of Gas Permeability in Microfluidic Devices by Confocal Micro-PIV Combined with LIF Technique
M. Ichiyanagi, K. Sakai, S. Kidani, Y. Kakinuma, Y. Sato, K. Hishida
AJTEC2011 (Honolulu, Hawaii) ,
2011.03,Oral presentation (general)
-
Development of Micro Drilling System without Tool Presetting
Y. Kakinuma, M. Yamamoto
The 6th International Conference on Micromanufacturing (Tokyo, Japan) ,
2011.03,Oral presentation (general)
-
A Study on Behavior Analysis of ER gel under an Electric field
Y. Naito, Y. Kakinuma, T. Aoyama
7th International Conference on Flow Dynamics (Miyagi, Japan) ,
2010.11,Oral presentation (general)
-
Hybrid Control for Machine Tool Table Applying Sensor-less Cutting Force Monitoring
M. Takei, D. Kurihara, S. Katsura, Y. Kakinuma
14th International Conference on Mechatronics Technology (Osaka,Japan) ,
2010.10,Oral presentation (general)
-
High-Precision Sensor-Less Cutting Force Measurement Method Applying Disturbance Observer with Multi-rate Sampling
Y. Kakinuma, M. Takei
4th CIRP International Conference on High Performance Cutting (Gifu, Japan) ,
2010.10,Oral presentation (general), CIRP
-
Development of Tool Positioning System in Glass Micromachining applying Polarization
N. Takahata, Y. Kakinuma, Y. Taguchi, T. Aoyama
4th CIRP International Conference on High Performance Cutting (Gifu, Japan) ,
2010.10,Oral presentation (general), CIRP
-
Evaluation of Polished Surface for Viscoelastic Polymer
T. Kubo, S. Ota, M. Oda, K. Hashishita, Y. Kakinuma
International Symposium of Advanced Abrasive Technology 2010 (Taipei) ,
2010.09,Oral presentation (general), JSAT
-
Stabilizing Output of ER Gel Linear Actuator
K. Koyanagi, Y. Kakinuma, H. Anzai, K.Sakurai, T. Yamaguchi, T. Ohshima
12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Philadelphia, USA) ,
2010.08,Oral presentation (general)
-
Basic Performance analysis of ER Gel in Vacuum
Y. Shida, T. Aoyama, H. Minami, H. Anzai, Y. Kakinuma
12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Philadelphia, USA) ,
2010.08,Oral presentation (general)
-
Theoretical Analysis on Electro-adhesive Effect of ER Gel
Y. Naito, T. Aoyama, H. Anazai, Y. Kakinuma
12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Philadelphia, USA) ,
2010.08,Oral presentation (general)
-
Development of Tactile Display using ERG Muotiple-Disk Clutch
Y. Urakami, T. Aooyama, H. Anzai, Y. Kakinuma
12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Philadelphia, USA) ,
2010.08,Oral presentation (general)
-
Cryogenic Ultra Precision Machining of Viscoelastic Resin Materials
S. Kidani, Y. Kakinuma, T. Aoyama
2010 International symposium on Flexible Automation (Tokyo, Japan) ,
2010.07,Oral presentation (general), ASME/JSME
-
Thrust Force Control in Drilling Applying a Sensor-less Cutting Force Monitoring Method
M. Yamamoto, Y. Kakinuma
10th euspen International Conference (Delft, Netherland) ,
2010.06,Poster presentation, euspen
-
Development of Chatter Vibration Detecting System utilizing Sensor-less Process Monitolring
Y. Sudo, Y. Kakinuma, T.Aoyama, K. Ohnishi
43rd CIRP International Conference on Manufacturing Systems (Vienna, Austria) ,
2010.06,Oral presentation (general), CIRP
-
Torque Sensor-less Tactile Control of Electro-rheological Passive Actuators
H. Tanaka, Y. Kakinuma, S. Katsura, T. Aoyama
the 11th IEEE International Workshop on Advanced Motion Control (AMC'11) (Nagaoka, Japan) ,
2010.03,Oral presentation (general)
-
Pre-Deformation-assisted Cryogenic Micromachining for Fabrication of Three-dimensional Unique Micro Channels
K. Mishima, M. Yamamoto, Y. Kakinuma, T. Aoyama
5th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Oosaka, Japan) ,
2009.12,Oral presentation (general)
-
Sensorless Cutting Force Control using Parallel Disturbance Observer
D. Kurihara, Y. Kakinuma, S. Katsura
5th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Oosaka, Japan) ,
2009.12,Oral presentation (general)
-
Design of Multiple-disk Brake Applying Electro-adhesive Sheet
KAKINUMA YASUHIRO
the Sixth International Conference on Flow Dynamics, Sendai (Sendai, Japan) ,
2009.11,Oral presentation (general)
-
Basic Study on Nanofabrication of Biodegradable Plastics using Biochemical Machining
Y. Kakinuma, S. Ikeda
Asian Symposium for Precision Engineering and Nanotechnology 2009 (Kitakyusyu, Japan) ,
2009.11,Poster presentation
-
Cooling-assisted Polishing of Elastic Polymer Materials
Y. Kakinuma, M. Sato, T. Aoyama, K. Hashishita, S. Ota
Asian Symposium for Precision Engineering and Nanotechnology 2009 (Kitakyusyu, , Japan) ,
2009.11,Oral presentation (general)
-
Surface Roughing Process by Ultrasonic Vibration Cutting
A. Sasada, Y. Kakinuma, T. Aoyama, K. Hasegawa, S. Hamada
Asian Symposium for Precision Engineering and Nanotechnology 2009 (Kitakyusyu, Japan) ,
2009.11,Oral presentation (general)
-
Electric Field-Assisted Glass Polishing Using Electro-Rheological Gel Pad
Y. Kakinuma, S. Takezawa, T. Aoyama, K. Tanaka and H. Anzai
International Symposium on Advanced Abrasive Technology 2009 (Australia) ,
2009.09,Oral presentation (general)
-
Development of Multiple-disk Brake Element Using Electro-rheological Gel
H. Tanaka, Y. Kakinuma, T. Aoyama
14th International Symposium on Applied Electromagnetics and Mechanics (China) ,
2009.09,Oral presentation (general)
-
Virtual Motor Control for the Machine Tools Table with 3 Linear Servo Motors
KAKINUMA YASUHIRO
The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Fukuoka, Japan) ,
2007.11,Oral presentation (general)
-
Sensing Technology of Micro Tool Edge Position by using the total reflection of laser
KAKINUMA YASUHIRO
The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Fukuoka, Japan) ,
2007.11,Oral presentation (general)
-
Development of Fixture element for Vacuum Transportation of Silicon Wafer using Electrorheological Gel
KAKINUMA YASUHIRO
The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Fukuoka, Japan) ,
2007.11,Oral presentation (general)
-
Micro machining of Soft Polymer Material applying the Cryogenic Cooling
KAKINUMA YASUHIRO
The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME (Fukuoka, Japan) ,
2007.11,Oral presentation (general)
-
Development of the Electric Field Assisted Polishing Technology using ERG Abrasive Pad
KAKINUMA YASUHIRO
International Symposium on Advanced Abrasive Technology 2007 (Dearborn MI, USA) ,
2007.09,Oral presentation (general), JSAT
-
Development of the Variable Friction Clutch Applying the Functional Medium
KAKINUMA YASUHIRO
9th International Research/Expert Conference (Liolet der Mar, Spain) ,
2006.09,Oral presentation (general)
-
Application of ERG with One-sided Pattern Electrodes to Micro Alignment and Fixture Devices
KAKINUMA YASUHIRO
10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions (Lake Tahoe) ,
2006.06,Oral presentation (general)
-
Optimum Design of One-sided Patterned Electrodes for Gel-structured ER Fluids by Means of a Numerical Analysis
KAKINUMA YASUHIRO
10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions (Lake Tahoe, USA) ,
2006.06,Oral presentation (general)
-
The influences of the material and geometrical properties of sliding plate on ER effect of Gel-structured ERF
KAKINUMA YASUHIRO
10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions (Lake Tahoe, USA) ,
2006.06,Oral presentation (general)
-
Basic Study on the Micro Polishing of Metal Mold using Electro-Rheological Ge
KAKINUMA YASUHIRO
10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions (Lake Tahoe, USA) ,
2006.06,Oral presentation (general)