Presentations -

Sensor-less chatter vibration monitoring by mechanical power factor

T. Hirano, Y. Yamada, Y. Kakinuma

[International presentation]  The 8th International Conference on Leading Edge Manufacturing in 21st Century, 

2015.10

, 

Oral presentation (general)

Sensorless cutting force estimation in large scale ball-screw-driven machine tool

Y. Yamada, Y. Kakinuma, T. Ito, J. Fujita , A. Tada, M. Sagara

[International presentation]  ISAAT2015, 

2015.10

, 

Oral presentation (general)

Identification of stable spindle rotation in milling with disturbance observer

R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi

[International presentation]  38th International MATADOR Conference, 

2015.03

, 

Oral presentation (general)

Helical milling of carbon fiber reinforced plastics using ultrasonic vibration and liquid nitrogen

T. Ishida; K. Noma; Y. Kakinuma; T. Aoyama; S. Hamada; H. Ogawa; T. Higaino

[International presentation]  New production technologies in aerospace industry - 5th machining innovations conference (MIC 2014), Procedia CIRP, 

2014.11

, 

Oral presentation (general)

Tool collision detection in high-speed feeding based on disturbance observer

Ryo Koike; Yasuhiro Kakinuma; Tojiro Aoyama; Kouhei Ohnishi

[International presentation]  Procedia CIRP, 

2014.06

, 

Oral presentation (general)

Cryogenic microshaping of viscoelastic polymer with single point diamond tool

Shun Yoshikawa; Yasuhiro Kakinuma; Yohei Sato; Tojiro Aoyama

[International presentation]  Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 

2014.06

, 

Oral presentation (general)

High-precision and high-efficiency micromachining of chemically strengthened glass using ultrasonic vibration

Kazuki Noma; Yu Takeda; Tojiro Aoyama; Yasuhiro Kakinuma; Seiji Hamada

[International presentation]  Procedia CIRP, 

2014.06

, 

Oral presentation (general)

Influence of cutting force and tool geometry on whole quality in glass microdrilling

M. Onozawa; R. Koike; Y. Murakami; Y. Kakinuma; T. Aoyama

Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014, 

2014.06

Experimental analysis of the surface integrity of single-crystal calcium fluoride caused by ultra-precision turning

Shunya Azami; Kudo Hiroshi; Takasumi Tanabe; Jiwang Yan; Yasuhiro Kakinuma

[International presentation]  Procedia CIRP, 

2014.05

, 

Oral presentation (general)

Sensor-less Tool Fracture Detection Applying Disturbance Observer Theory

R. Koike, Y. Kakinuma, T. Aoyama

[International presentation]  International Conference on Precision Engineering (ICPE2012) (Awaji Japan) , 

2012.11

, 

Oral presentation (general), 精密工学会

Enhancement of Sensor-less Tool Fracture Detection Method Applying Rotational Digital Filter

R. Koike, Y. Kakinuma, T. Aoyama

[International presentation]  3rd CIRP International Conference on Process Machine Interactions (PMI2012) (Nagoya Japan) , 

2012.10

, 

Oral presentation (general), CIRP

Development of the tool contact stiffness monitoring method in buffing with the intelligent polishing machine

K.Igarashi, Y.Kakinuma, T.Arai, E.Uchishiba, M.Murakami, T.Sagara

[International presentation]  9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012) (Prague Czech Republic) , 

2012.09

, 

Oral presentation (general)

Cutting force monitoring in ball screw driven stage by inner sensor fusion

H. Miyazaki, R. Kumakura, Y. Kakinuma

[International presentation]  9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012) (Prague Czech Republic) , 

2012.09

, 

Oral presentation (general)

Basic Research on the Seismic Damper Applying Electro-Adhesive Gel

H. Iwashina, T. Aoyama, H.Anzai, K. Sakurai, Y. Kakinuma

[International presentation]  13th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions (Ankara Turkey) , 

2012.07

, 

Oral presentation (general)

External sensor-less tool contact detection by cutting force observer

Y. Kakinuma, T. Kamigochi

[International presentation]  1st CIRP Global Web Conference on Interdisciplinary Research in Production Engineering (International web conference) , 

2012.06

, 

Oral presentation (general), CIRP

Disturbance Observer–Based In-process Detection and Suppression of Chatter Vibration

T. Yoneoka, Y. Kakinuma, K. Ohnishi, T. Aoyama

[International presentation]  5th CIRP Conference on High Performance Cutting 2012 (Zurich, Switzerland) , 

2012.05

, 

Oral presentation (general), CIRP

Ultrasonic Vibration and Cavitation-aided Micromachining of Hard and Brittle Materials

R. Tsuboi, Y. Kakinuma, T. Aoyama, H. Ogawa, S. Hamada

[International presentation]  5th CIRP Conference on High Performance Cutting 2012 (Zurich, Switzerland) , 

2012.05

, 

Oral presentation (general), CIRP

Basic study on Ultraprecision machining of Single-crystal Calcium Fluoride

Y. Mizumoto, Y. Kakinuma, T. Aoyama

[International presentation]  1st CIRP Conference on Surface Integrity (Bremen, Germany) , 

2012.01

, 

Oral presentation (general), CIRP

Development of an intelligent stage with sensor-less cutting force and torque monitoring function

T.Kamigochi, Y. Kakinuma

[International presentation]  The 6th International Conference on Leading Edge Manufacturing in 21st Century (Saitama, Japan) , 

2011.11

, 

Oral presentation (general), JSME

Basic performance evaluation of Electro-adhesive film with micro mesh sheet

T. Kubo, Y. Kakinuma

[International presentation]  Asian Symposium for Precision Engineering and Nanotechnology 2011 (Hongkong, China) , 

2011.11

, 

Oral presentation (general)