Presentations -
-
廃シリコン粉末とアルミニウム微粒子の高圧焼結による複合構造体の創成
砂場勇輝，閻 紀旺
砥粒加工学会先進テクノフェア(ATF2016)卒業研究発表会,
2016.03,Poster presentation
-
Development of a highly-sensitive time-resolved IR spectrometer and its application to high-background aqueous biological samples
M. Kubo, T. Kimura, Y. Yamaguchi, S. Yanagisawa, R. Komiya, Jiwang Yan, S. Nakashima, T. Ogura, Y. Shiro
The 2015 International Chemical Congress of Pacific Basin Societies (Pacifichem 2015) (Honolulu, Hawaii, USA) ,
2015.12,Oral presentation (general)
-
回転式放電加工を用いた焼結ダイヤモンドへの総形微細状写
渡邉和憲，閻 紀旺
電気加工学会全国大会,
2015.12,Oral presentation (general)
-
High-efficiency ultraprecision machining of micro dimple arrays by using slow tool servo
Mao Mukaida, Jiwang Yan
The 11st China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2015) (Tokyo, Japan) ,
2015.11,Oral presentation (general)
-
単結晶シリコンの押し込みと切削における高圧相変態の解析
原田博文，閻 紀旺
日本学術振興会第145委員会第146回研究会 (東京) ,
2015.11,Oral presentation (invited, special)
-
Laser Recovery of Subsurface Damages in Chemomechanically Polished Silicon Wafers
K. Niitsu, Y. Tayama, H. Maehara, T. Kato, J. Yan
The 2nd International Conference on the Science & Engineering of Materials (ICoSEM2015) (Malaysia) ,
2015.11,Oral presentation (general)
-
Effect of PZT-driven three-axis vibration on electrical discharge behavior in micro EDM
Bunta Okada, Jiwang Yan
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2015) (Kyoto, Japan) ,
2015.10,Oral presentation (general)
-
Press molding of Si-HDPE hybrid lens substrate for infrared optical applications
Ahmad Rosli Abdul Manaf, Jiwang Yan
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2015) (Kyoto, Japan) ,
2015.10,Oral presentation (general)
-
Investigation on surface formation mechanism of porous carbon in diamond turning
Mehdi Heidari, Jiwang Yan
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2015) (Kyoto, Japan) ,
2015.10,Oral presentation (general)
-
Ultraprecision cutting of single crystal calcium fluoride for fabricating micro flow cell for protein structure analysis
Ryo Komiya, Tetsunari Kimura, Minoru Kubo, Jiwang Yan
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2015) (Kyoto, Japan) ,
2015.10,Oral presentation (general)
-
Effects of electrical discharge machining conditions on thermal damage in polycrystalline diamond
Kazunori Watanabe, Jiwang Yan
The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 2015) (Kyoto, Japan) ,
2015.10,Oral presentation (general)
-
Study on precision slicing process of single-crystal silicon by using dicing wire saw
T. Suzuki, T. Otsuki, J. Yan
The 18th International Symposium on Advances in Abrasive Technology (ISAAT 2015) (Jeju Island, South Korea) ,
2015.10,Oral presentation (general)
-
Study on mechanical properties of single-crystal silicon carbide by nanoindentation
M. Matsumoto, H. Harada, K. Kakimoto, J. Yan
The 18th International Symposium on Advances in Abrasive Technology (ISAAT 2015) (Jeju Island, South Korea) ,
2015.10,Oral presentation (general)
-
ダイシングワイヤーソーによる単結晶シリコンの精密切断に関する研究
鈴木孝彰，大槻俊紀，閻 紀旺
2015年度砥粒加工学会学術講演会(ABTEC2015) (横浜) ,
2015.09,Oral presentation (general)
-
超音波振動援用研削によるCFRPの高精度穴あけ加工
山崎剛史，閻 紀旺
2015年度砥粒加工学会学術講演会(ABTEC2015) (横浜) ,
2015.09,Oral presentation (general)
-
廃シリコン粉末の赤外線焼結によるポーラス複合膜の創製
岡田航雅，閻 紀旺
2015年度砥粒加工学会学術講演会(ABTEC2015) (横浜) ,
2015.09,Oral presentation (general)
-
Ductile machining of hard brittle materials- applications and challenges
YAN JIWANG
The 2nd International Forum on Modern Optics Manufacturing Engineering and Science (Shenzhen, China) ,
2015.09,Oral presentation (keynote)
-
Nano-precision fabrication of hexagonal microlens array by segment turning using slow tool servo
Mao Mukaida, Jiwang Yan
The 15th international conference of the european society for precision engineering and nanotechnology (euspen2015) (Leuven, Belgium) ,
2015.05,Poster presentation
-
硬脆材料の超精密切削における主な問題点とその対策
閻 紀旺
砥粒加工学会ＣＢＮ＆ダイヤモンド先進加工研究専門委員会第10回研究講演会 (東京) ,
2015.03,Oral presentation (invited, special)
-
分割切削法によるマイクロレンズアレイ金型の超精密加工
向田茉央，閻 紀旺
精密工学会第22回学生会員卒業研究発表講演会,
2015.03,Oral presentation (general)