Presentations -
-
Effects of pore size and cutting scale on machining of porous titanium
Mehdi Heidari, Jiwang Yan
The 5th Annual International Conference on Materials Science, Metal & Manufacturing (M3 2018) (Singapore) ,
2018.03,Oral presentation (general)
-
超音波振動援用バニシングによる金属積層造形面の高品質化
寺町亮則，閻 紀旺
砥粒加工学会先進テクノフェア(ATF2018)卒業研究発表会,
2018.03,Poster presentation
-
廃シリコン粉末へのレーザ照射によるナノ粒子生成
百木 航，閻 紀旺
砥粒加工学会先進テクノフェア(ATF2018)卒業研究発表会,
2018.03,Poster presentation
-
レーザ照射を用いたリチウムイオン電池用シリコン負極の開発
閻 紀旺
平成29年度中部大学生産技術開発センター研究発表会,
2018.03,Oral presentation (invited, special)
-
Ultraprecision machining of wavy microstructures on roller surfaces by using a slow tool servo
Toshitaka Terabayashi, Jiwang Yan
The 13th China-Japan International Conference on Ultra-Precision Machining Process (Shanghai, China) ,
2017.11,Oral presentation (general)
-
Ductile mode cutting of optical glass without silicon oxide composition
Jun ISHIZUKA, Keisuke NAGASAWA, Masayuki MIKAMI, Jiwang Yan
The 9th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) (Hiroshima, Japan) ,
2017.11,Oral presentation (general)
-
Healing of micro-cracks in optical glass using a pulsed laser
Nozomi Takayama, Yuta Nishide, Jiwang Yan
The 9th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21) (Hiroshima, Japan) ,
2017.11,Oral presentation (general)
-
Fabrication of polycrystalline diamond molds by micro EDM
S. Kasai, T. Sodetai, J. Yan
32nd ASPE Annual Meeting (Chartlotte, North Carolina, USA) ,
2017.11,Poster presentation
-
Ultraprecision machining of hard-brittle materials- Advances and challenges -
YAN JIWANG
Taishan Academic Forum on Advanced Machining of Engineering Ceramics (Zibo, China) ,
2017.10,Oral presentation (keynote)
-
Ultraprecision machining for free-form IR optics
YAN JIWANG
Workshop on Ultra Precision Manufacturing of Aspheres and Freeforms – Imaging and Non-imaging Applications (UPM2017) (Changchun, China) ,
2017.09,Oral presentation (invited, special)
-
パルスレーザ照射によるサファイアの3次元微細構造の加工
高山望，浅賀翔平，閻 紀旺
2017年度精密工学会秋季大会学術講演会 (大阪) ,
2017.09,Oral presentation (general)
-
Smoothing of steel materials and formation of nanoperiodic structures by picosecond pulsed laser ablation
T. Kobayashi, H. Sera, T. Wakabayashi, H. Endo, Y. Takushima, YAN JIWANG
International Conference on Laser Ablation (COLA2017) (Marseille, France) ,
2017.09,Poster presentation
-
SiO2を含まない光学ガラスの超精密切削加工
石塚 潤，長澤圭祐，三神政之，閻 紀旺
2017年度砥粒加工学会学術講演会(ABTEC2017) (福岡) ,
2017.08,Oral presentation (general)
-
精密ナノ加工における最近の取り組み
閻 紀旺
精密工学会ナノ精度機械加工専門委員会第４２回委員会 (横浜) ,
2017.06,Oral presentation (invited, special)
-
Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests
Nozomi Takayama, Jun ishizuka, YAN JIWANG
2017 World Congress on Micro and Nano Manufacturing (Kaoxiung, Taiwan) ,
2017.03,Oral presentation (general)
-
Ultraprecision machining of single-crystal silicon using a slow tool servo for infrared microlens arrays
Mao Mukaida, YAN JIWANG
ASPEN/ASPE 2017 Spring Topical Meeting. Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications (Hong Kong) ,
2017.03,Oral presentation (general)
-
ピコ秒レーザアブレーションによる工具鋼の平滑化加工
世良博史, 漆畑卓朗, 石田 宏, 杉山善崇, 若林知敬, 閻 紀旺
2017年度精密工学会春季大会学術講演会,
2017.03,Oral presentation (general)
-
チタンとの高温化学反応を利用した単結晶ダイヤモンド表面への3次元微細構造体転写
井本祐司，閻 紀旺
2017年度精密工学会春季大会学術講演会,
2017.03,Oral presentation (general)
-
廃シリコン粉末へのレーザ照射による単結晶シリコンマイクロピラーの形成
野口 淳，閻 紀旺，寺師 吉健
2017年度精密工学会春季大会学術講演会,
2017.03,Oral presentation (general)
-
ピコ秒パルスレーザ照射による鋼材表面の平坦化とナノ周期構造形成
小林知貴，閻 紀旺
精密工学会第24回学生会員卒業研究発表講演会,
2017.03,Oral presentation (general)