Papers - Inasaki, Ichiro
-
５軸マシニングセンタにおける組立誤差同定法
坂本重彦、稲崎一郎
日本機械学会論文集（Ｃ編） Vol.60 ( No.575 ) 271-279 1994.07
Research paper (conference, symposium, etc.), Joint Work
-
ＡＥによる研削現象のセンシング
稲崎
砥粒加工学会誌 Vol.38 ( No.4 ) 15-18 1994.07
Research paper (conference, symposium, etc.), Joint Work
-
工作機械における形状創成理論の体系化と応用
日本機械学会論文集（Ｃ編） Vol.60 ( No.574 ) 1-5 1994.06
Research paper (conference, symposium, etc.), Single Work
-
工作機械における形状創成理論の体系化と応用
稲崎
日本機械学会論文集（Ｃ編） Vol.60 ( No.574 ) 1-5 1994.06
Research paper (conference, symposium, etc.), Single Work
-
Detection of Built-up Edge in Turning Process
S.Sukvittayawong, I.Inasaki
Int. J. Mach. Tools Manufact. 34 ( 6 ) 829-840 1994
Research paper (conference, symposium, etc.), Joint Work
-
高速内面研削に関する基礎研究
稲崎一郎，安相郁，吉田智彦，和久田学，板垣雅彦
砥粒加工学会誌 Vol.37 ( No.6 ) 38-42 1993.11
Research paper (scientific journal), Joint Work
-
Monitoring of Grinding Process with a Sensor Integrated CBN Wheel
Inasaki,I., Ogawa,K. and Matsumoto,T.
SME Technical Paper MR93-367 1993.10
Joint Work
-
Built-up Edge Detection by Cutting Force Measurement
Sukvittayawong,S. and Inasaki,I.
Proceeding of the 2nd International Conference on Computer Integrated Manufacturing, Singapore 963 1993.09
Research paper (conference, symposium, etc.), Joint Work
-
ＡＥセンサ内蔵ＣＢＮホイールによる研削プロセスの監視
和久田学，稲崎一郎，小川浩二，高原基彰
精密工学会誌 Vol.59 ( No.2 ) 97-102 1993.02
Research paper (conference, symposium, etc.), Joint Work
-
サーメットの高能率研削加工
冨山 績，稲崎一郎，白鳥栄尚
日本機械学会論文集 Vol.59 ( No.558 ) 267 -272 1993.02
Research paper (conference, symposium, etc.), Joint Work
-
アコースティックエミッションセンサを用いたフライス加工状態の自動監視
竹下拓利，稲崎一郎
精密工学会誌 Vol.59 ( No.2 ) 91-96 1993.02
Research paper (conference, symposium, etc.), Joint Work
-
Detection of Acoustic Emission Signal from a Rotating Cutting Tool
Kayaba, H. and Inasaki, I
Proceedings of the 8th annual meeting of ASPE 246-249 1993
Research paper (conference, symposium, etc.), Joint Work
-
A Study on the Effect of Internal High-Speed Grinding
Kim,G.H., An,S.W., Inasaki,I., Kang,J.H. and Lee,E.S.
Proceedings of the 1st International Abrasive Technology Conference 1993
Research paper (conference, symposium, etc.), Joint Work
-
Knowledge Acquisition and Design for the Grinding Trouble-Shooting
Kim,G.H., Inasaki,I. and Lee,J.K.
Proceedings of the 1st International Abrasive Technology Conference 1993
Research paper (conference, symposium, etc.), Joint Work
-
Basic Parameters in Grinding
Brinksmeier,E., Toenshoff,H.K., Inasaki,I. and Peddinghaus,J.
Annals of the CIRP Vol.42/2 795-799 1993
Joint Work
-
研削プロセスの適応的因果関係モデル
坂倉守昭、稲崎一郎
日本機械学会論文集 59 ( 567 ) 321-326 1993
Research paper (conference, symposium, etc.), Joint Work
-
Adaptive Control Optimization of Turing with Detection of Chip Form, Chatter Vibration and Build-up Edge
Sukvittayawong, S. and Inasaki, I.
システム制御情報学会論文集 Vol.6 ( No.12 ) 30-40 1993
Research paper (conference, symposium, etc.), Joint Work
-
Development of a robot system for metal molds polishing
T.Aoyama, I.Inasaki
Trans. of NAMRI/SME Vol.21 295- 301 1993
Research paper (scientific journal), Joint Work
-
Analysis of generating motion for five-axis machining centers
稲崎一郎，坂本重彦
Trans. of NAMRI/SME Vol.21 287- 293 1993
Research paper (scientific journal), Joint Work
-
Prozessregelung beim lnnenrundschleifen mit unscharfer Logik
I.Inasaki, H.K.T?nshoff and A.Walter
ZwF Vol.88 ( No.6 ) 282-284 1993
Research paper (scientific journal), Joint Work