Papers - YAMADA, Shu

Degree of twist in the Achilles tendon interacts with its length and thickness in affecting local strain magnitude: a finite element analysis

Enomoto, S., Furuuchi, S., Ishibashi, T., Yamada, S. and Oda, T.

Frontiers in Bioengineering and Biotechnology (Frontiers)   2024.10

Research paper (scientific journal), Accepted

• Access to Document (DOI)

Verifying the Effect of Initial Sample Size in Bayesian Optimization

Furuuchi, S. and Yamada, S.

Total Quality Science 10 ( 1 ) 8 - 19 2024.05

Research paper (scientific journal), Accepted

Structuring Clinical Knowledge in Rehabilitation after Cerebrovascular Disease

Kato, S., Tsuru, S., Ide, M., Shindo, A., Yahagi, N. and Yamada, S.

Japan Association for Clinical Knowledge (in Japanese) 5   39 - 42 2024.03

Research paper (scientific journal), Last author, Accepted

Detecting unexpected scores of individual students in an examination based on past scores and current daily efforts

Alauddin N., Tanaka S., Yamada S.

TQM Journal (TQM Journal)  35 ( 8 ) 2485 - 2502 2023.12

Research paper (scientific journal), Last author, Accepted,  ISSN  17542731

　View Summary

Purpose: This paper proposes a model for detecting unexpected examination scores based on past scores, current daily efforts and trend in the current score of individual students. The detection is performed soon after the current examination is completed, which helps take immediate action to improve the ability of students before the commencement of daily assessments during the next semester. Design/methodology/approach: The scores of past examinations and current daily assessments are analyzed using a combination of an ANOVA, a principal component analysis and a multiple regression analysis. A case study is conducted using the assessment scores of secondary-level students of an international school in Japan. Findings: The score for the current examination is predicted based on past scores, current daily efforts and trend in the current score. A lower control limit for detecting unexpected scores is derived based on the predicted score. The actual score, which is below the lower control limit, is recognized as an unexpected score. This case study verifies the effectiveness of the combinatorial usage of data in detecting unexpected scores. Originality/value: Unlike previous studies that utilize attribute and background data to predict student scores, this study utilizes a combination of past examination scores, current daily efforts for related subjects and trend in the current score.

• Access to Document (DOI)

TQM model based on Deming prize for schools

Alauddin N., Yamada S.

International Journal of Quality and Service Sciences (Emerald)  14 ( 4 ) 635 - 651 2022.10

Research paper (scientific journal), Accepted,  ISSN  1756669X

　View Summary

urpose: This paper aims to develop a total quality management (TQM) model based on the Deming prize criteria extracted from the Deming Prize. The proposed model is aligned with the school education context and deployed with the goal of achieving school excellence. Design/methodology/approach: The model is developed based on a literature review in which key concepts for formulating the criteria and sub-criteria were identified. A qualitative research approach is applied to validate the model’s effectiveness. Interviews and feedback from an international school in Japan which adopted the model are used to determine its impact. Findings: The model emphasises the achievement of school objectives (A) by implementing TQM activities (B) and assessing their impact (C). Its implementation offers enhanced organisational ability and the achievement of society-oriented school objectives. The findings show that the model gives clarity to TQM application and offers benefits for schools’ future sustainability. Originality/value: This research proposes the adoption of a TQM model for educational institutions based on Deming criteria. Based on a comparison with prescriptive models such as Malcolm Baldrige National Quality Award and ISO 9001, this study shows how the developed model ensures organisational ability in current practice and future growth towards school excellence. Through the formulation of society-oriented school objectives and their linkage with results, it enables schools to create a balanced recognition of important stakeholders and gain consensus in realising the school’s objectives.

• Access to Document (DOI)

A comparative survey on the certification effect of Occupational Health and Safety Management System

Kono, N., Kaneko, M., Saito, M, Makino, C. and Yamada, S.

Total Quality Science 8 ( 2 ) 32 - 39 2022.06

Research paper (scientific journal), Last author, Accepted

Discussion on supersaturated design and its data analysis method in computer experiments

Ueda, A. and Yamada, S.

Total Quality Science (Japanese Society for Quality Control)  7 ( 2 ) 60 - 68 2022.02

Research paper (scientific journal), Last author, Accepted

Detection of unusual scores of individual students for immediate remedy according to daily assessment data

Alauddin N., Yamada S.

TQM Journal (Emerald)  35 ( 6 ) 1514 - 1531 2022

Research paper (scientific journal), Accepted,  ISSN  17542731

　View Summary

urpose: The availability of daily assessment data in a centralized monitoring system at school provides the opportunity to detect unusual scores soon after the assessment is carried out. This paper introduces a model for the detection of unusual scores of individual students to immediately improve performances that deviate from a normal state. Design/methodology/approach: A student's ability, a subject's difficulty level, a student's specific ability in a subject, and the difficulty level of an assessment in a subject are selected as factor effects of a linear ANOVA model. Through analysis of variance, a case study is conducted based on 330 data points of assessment scores of primary grade students retrieved from an international school in Japan. Findings: The actual score is below the lower control limit, which is recognized as an unusual score, and the score can be detected immediately after sitting for an assessment and is beneficial for students to take immediate remedies based on daily assessment. This is demonstrated through a case study. Originality/value: The detection of unusual scores based on a linear model of individual students soon after each assessment benefits from immediate remedy aligns with a daily management concept. The daily assessment data in a school system enable detection based on individual students, subject-wise and assessment-wise to improve student performances in the same academic year.

• Access to Document (DOI)

Comprehensive understanding of main effects and interactions in Plackett Burman design

Oishi, Y. and Yamada, S.

Total Quality Science 6 ( 2 ) 43 - 51 2021.02

Research paper (scientific journal), Joint Work, Accepted

A case study on integration of vehicle defect and recall information analysis

Yamamoto, Y. and Yamada, S.

Total Quality Science 6 ( 2 ) 52 - 59 2021.02

Research paper (scientific journal), Joint Work, Accepted

Construction of fractional factorial design considering accuracy and robustness in the estimation of main effects

Taguchi, Y. and Yamada, S.

Total Quality Science 6 ( 1 ) 11 - 19 2021.01

Research paper (scientific journal), Joint Work, Accepted

A research on application of inverse estimation by Gaussian process regression to computer experiments

Nagashima, M. and Yamada, S.

Total Quality Science 6 ( 1 ) 34 - 42 2021.01

Research paper (scientific journal), Joint Work, Accepted

A Study on the Factors Affecting the Success or Failure of Machine Processing Work and on Methods of Instruction Using Predictive Models of Proficiency

Oku, T., Hirano, K. and Yamada, S.

Engineering Education (iin Japanese) 68 ( 5 ) 45 - 50 2020.06

Research paper (scientific journal), Joint Work, Accepted

Evaluation on alias relation of interactions in Plackett Burman design and its application to guide assignments

Oishi, Y. and Yamada, S.

Total Quality Science 5 ( 2 ) 81 - 91 2020.02

Research paper (scientific journal), Joint Work, Accepted

Proposals for measures to prevent information leaks through compliance with rules

Eguchi, A., Ryoke, M. and Yamada, S.

Journal on the Japanese Society for Management Information (in Japanese) 28 ( 3 ) 141 - 156 2019.10

Research paper (scientific journal), Joint Work, Last author, Accepted

A classification method for the learning process in machine tool operation

Oku T., Hirano K., Yamada S.

Journal of Japan Industrial Management Association 70 ( 1 ) 10 - 20 2019.07

Research paper (scientific journal), Accepted,  ISSN  13422618

　View Summary

In the learning process for the operation of the machine tool, there's are two groups: one with a higher ability to finish within the allotted time and targeted workpiece size within the allowed tolerance, and one with lower ability that requires more practice to achieve the desired target outcome. However, it is difficult to forecast if the target is going to be achieved applying only the results from the early stage of the learning process. Moreover, there are problems determining learning process tendencies due to differences in trainees' abilities to learn the aspects of machine tool operations and the large variances in target workpiece sizes obtained from the training results. Therefore, this paper proposes a classification method for tendencies in the learning process in an attempt to develop a training method that matched the trainee's results. Using the Maharanobis-Taguchi System, it is possible to calculate a forecast for learning situations by evaluating the first half of repeated training. This method is applied to a practical case and the effectiveness of the method is indicated.

• Access to Document (DOI)

A Study on Methods of Classifying Learning Processes in Machine Processing Work

Oku, T., Hirano, K. and Yamada, S.

Journal of Japan Industrial Management Association (in Japanese) 70 ( 1 ) 10 - 20 2019.07

Research paper (scientific journal), Joint Work, Accepted

Guidelines for Preparing Environmental Reports as Communication Tools - Analysis of Trends in Information Disclosure on Global Warming Countermeasures by Manufacturing Companies

Otani, S., Ryoke, M. and Yamada, S

Environmental science (in Japanese) 30 ( 5 ) 296 - 306 2017.09

Research paper (scientific journal), Joint Work, Last author, Accepted

Measuring task quality through technical-service software

Takahashi, G. and Yamada, S.

Total Quality Science 3 ( 1 ) 22 - 34 2017.05

Research paper (scientific journal), Joint Work, Accepted

• Access to Document (DOI)

An analysis of automobile companies' intensity targets for CO2 reduction: Implications for managing performance

Otani, S. and Yamada, S.

Total Quality Management and Business Excellence 30 ( 3-4 ) 335 - 354 2017.03

Research paper (scientific journal), Joint Work, Accepted,  ISSN  14783363

　View Summary

The CO2 intensity targets that companies disclose have come to play two roles in their environmental evaluation: (i) as an external index demonstrating companies’ commitment to environmental issues; (ii) as an internal measure for controlling and managing their environmental activities. We focus on the CO2 emission intensity reduction targets of eight automobile manufacturers. Such targets have not yet been standardised, and so they are sometimes difficult to compare. We propose a new CO2 emission efficiency index using data envelopment analysis (DEA) that can compare companies in the same industrial sector. We first research CO2-related indices employed by the companies. Next, we collect economic data and CO2 emission data for the 5 years from 2008 to 2012 and evaluate the companies using a DEA bad-output model. We then take Fiat’s case and found that the new index, based on several economic factors, offers better comparability than simple indicators, since it accounts for more of the CO2 emissions’ economic background. The index will be useful for companies considering mid- to long-term CO2 reduction targets, as it takes several economic aspects into account simultaneously, and will appeal to stakeholders who want to improve their companies’ positions in the industry.

• Access to Document (DOI)

Information organization and visualization for selecting functions in the development of technical service support software

Takahashi, G. and Yamada, S.

Journal of Japan Industrial Management Association (in Japanese) 65 ( 4 ) 312 - 319 2015.01

Research paper (scientific journal), Joint Work, Accepted

Examination of measures for the separate disposal of aerosol cans, etc., with a focus on ease of disposal for residents

Sugiyama, R. and Yamada, S.

Journal of Japan Waste Management Association (in Japanese) 67 ( 322 ) 602 - 612 2014.11

Research paper (scientific journal), Joint Work, Last author, Accepted

Analysis of residents' awareness and behavior in relation to the separate disposal of aerosol cans

Sugiyama, R. and Yamada, S.

The Journal of Material Cycles and Waste Management (in Japanese) 24 ( 3 ) 40 - 52 2013.06

Research paper (scientific journal), Joint Work, Accepted

Comparative analysis of information security incident cases with and without ISO 27001 certification

Eguchi, A. and Yamada, S.

Japan Society of Security Management (in Japanese) 27 ( 1 ) 3 - 16 2013.05

Research paper (scientific journal), Joint Work, Last author, Accepted

Critical factors for process improvement in pharmaceutical research

Inoue, H. and Yamada, S.

The TQM journal 25 ( 2 ) 141 - 152 2013.03

Research paper (scientific journal), Joint Work, Last author, Accepted

Analysis of the Current Situation of Fire Accidents Caused by Aerosol Cans in Local Governments

Sugiyama, R. and Yamada, S.

The Journal of Material Cycles and Waste Management (in Japanese) 22 ( 6 ) 372 - 381 2012.01

Research paper (scientific journal), Joint Work, Last author, Accepted

Composition of mixed-level supersaturated planning using a two-stage optimization method

Ono, T., Hashiguchi, H. and Yamada, S.

Journal of the Japanese Society of Computational Statistics (in Japanese) 24 ( 1 ) 23 - 35 2011.10

Research paper (scientific journal), Joint Work, Accepted

Application of QFDE on Greenhouse Gas Reduction Strategy

Otani, S. and Yamada, S.

International Journal of Quality and Service Science 3 ( 3 ) 285 - 303 2011.09

Research paper (scientific journal), Joint Work, Accepted

Optimal selection and ordering columns in supersaturated design

Niki, N., Iwata, M., Hashiguchi, H. and Yamada, S.

Journal of Statistical Planning and Inferences 141   2449 - 2462 2011.07

Research paper (scientific journal), Joint Work, Accepted

A Study on the Construction of Design Review Items Based on Defect Information

Nishiura, Y. and Yamada, S.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 40 ( 4 ) 79 - 87 2010.10

Research paper (scientific journal), Joint Work, Accepted

Application of process FMEA as a performance Improvement tool in pharmaceutical research

Inoue, H. and Yamada, S.

International Journal of Quality and Service Science 2 ( 3 ) 369 - 382 2010.09

Research paper (scientific journal), Joint Work, Accepted

Survey of awareness of technical standards in aerospace development and establishment of educational programs

Sekita, R. and Yamada, S.

Journal of Japanese Society of Engieering Education (in Japanese) 58 ( 4 ) 84 - 90 2010.07

Research paper (scientific journal), Joint Work, Accepted

航空宇宙開発でシステム安全活性化を図るエンジニアリング教育効果の適量的測定

Sekita, R. and Yamada, S.

Journal of Japanese Society of Engieering Education (in Japanese) 56 ( 6 ) 72 - 78 2008.11

Research paper (scientific journal), Accepted

Quantitative analysis of accident data from the perspective of system safety

Sekita, R. and Yamada, S.

The journal of Reliability Engineering Association of Japan (in Japanese) 30 ( 3 ) 294 - 304 2008.05

Research paper (scientific journal), Accepted

A general construction method for mixed-level supersaturated design

Yamada, S., Matsui, M., Matsui, T. Lin, D. K. J. and Takahashi, T.

Computational Statistics and Data Analysis 50   254 - 265 2006.01

Research paper (scientific journal), Joint Work, Accepted

Selection of active factors by stepwise regression in the data analysis of supersaturated design

Yamada, S.

Quality Engineering 16 ( 4 ) 501 - 513 2004.10

Research paper (scientific journal), Single Work, Accepted

A method of selecting an active factor and its robustness against correlation in the data

Yamada, S.

Asian Journal on Quality 4 ( 2 ) 16 - 31 2003.10

Research paper (scientific journal), Joint Work, Accepted

Consutruction of mixed-level supersaturated design

Yamada, S. and Lin, D. K. J.

Metrika 56   205 - 214 2002.12

Research paper (scientific journal), Joint Work, Accepted

Optimality of mixed-level supersaturated designs

Yamada, S. and Matsui, T.

Journal of Statistical Planning and Inferences 104   459 - 468 2002.06

Research paper (scientific journal), Joint Work, Accepted

Achievement of quality improvement and creation

Yamada, S.

Total Quality Management-Belgrade- 30 ( 1 ) 43 - 48 2002.03

Research paper (scientific journal), Single Work, Accepted

Cost estimation for ISO 9000 certification in Japanese companies

Yamada, S.

Asian Journal on Quality 2 ( 1 ) 117 - 128 2001.06

Research paper (scientific journal), Single Work, Accepted

The requirements on statistical techniques in QS-9000

Yamada, S.

Asian Journal on Quality 1 ( 1 ) 24 - 31 2000.06

Research paper (scientific journal), Single Work, Accepted

Construction of three-level supersaturated design

Yamada, S., Ikebe, Y., Hashiguchi, H. and Niki, N.

Journal of Statistical Planning and Inference 81   183 - 193 1999.10

Research paper (scientific journal), Joint Work, Accepted

Three-level supersaturated design

Yamada, S. and Lin, D. K. J.

Statistics and Probability Letters 45   31 - 39 1999.10

Research paper (scientific journal), Joint Work, Accepted

Idea generation in attractive quality creation

Yamada, S.

Total Quality Managemanet-Belgrade 26   542 - 547 1998.06

Research paper (scientific journal), Single Work, Accepted

Effects of correlation between explanatory variables in the linear calibration problem

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese)

品質 27 ( 4 ) 117 - 124 1997.10

Research paper (scientific journal), Single Work, Accepted

Supersaturated design including an orthogonal base

Yamada, S. and Lin, D. K. J.

Canadian Journal of Statistics 25 ( 2 ) 203 - 213 1997.06

Research paper (scientific journal), Joint Work, Accepted

A Study on determination of tolerance limit based on regression

Yamada, S., Okugi, S. and Kano, N.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 25 ( 3 ) 91 - 95 1995.07

Research paper (scientific journal), Joint Work, Accepted

Robustness of generalized inverse regression estimator against outlier

Yamada, S.

Journal of Japanese Society of Applied Statistics (in Japanese) 23 ( 3 ) 155 - 162 1995.03

Research paper (scientific journal), Single Work, Accepted

Determination of operating conditions in practical problems when quality characteristics have constraints

Yamada, S., Kojima, J. and Kano, N.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 24   399 - 405 1994.10

Research paper (scientific journal), Joint Work, Accepted

A proposal for a sequential experimental method when quality characteristics have constraints

Yamada, S. and Kano, N.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 23 ( 2 ) 187 - 193 1993.04

Research paper (scientific journal), Joint Work, Accepted

Some comments on the determination of operating conditions when quality characteristics have constraints -Perfomance evaluation and approximation-

Yamada, S. and Kano, N.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 23 ( 1 ) 75 - 83 1993.01

Research paper (scientific journal), Joint Work, Accepted

Theoretical framework on determination of operating conditions when quality characteristics have constraints

Yamada, S. and Kano, N.

Hinshitsu, Journal of Japanese Society of Quality Control (in Japanese) 22 ( 3 ) 221 - 228 1992.07

Research paper (scientific journal), Joint Work, Accepted

Discussion on the comparative analysis of educational effects amongst teachers in schools

Urata, Y. and Yamada, S.

Proceedings of ANQ 2023 congress    452 - 460 2023.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Statistical analysis of organizational goal achievement and ISO requirement

Matsushita, N., Kaneko, M. and Yamada, S.

Proceedings of ANQ 2023 congress    1059 - 1065 2023.10

Research paper (international conference proceedings), Corresponding author, Accepted

Verifying the effect of initial sample size in Bayesian optimization

Furuuchi, S. and Yamada, S.

Proceedings of ANQ 2023 congress    1059 - 1065 2023.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Recognition survey to improve the reference level of ISO 22000 certification system

Saito, W. and Yamada, S.

Proceedings of ANQ 2023 congress    875 - 890 2023.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Statistical analysis of organizational goal achievement and ISO requirement

Matsushita, N., Kaneko, M. and Yamada, S.

Proceedings of ANQ 2023 congress    752 - 764 2023.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Case study on the correlation between the feature of the text and the click rate in search-linked advertisement

Furihara, a. and Yamada, S.

Proceedings of ANQ 2022 congress    875 - 890 2022.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Use of ISO certification system in municipalities proposed measures to promote

Matsushita, N., Kaneko, M. and Yamada, S.

Proceedings of ANQ 2022 congress    1213 - 1228 2022.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Algorithmic construction of Latin hypercube design

Ueda, A. and Yamada, S.

Proceedings of ANQ 2022 congress    752 - 764 2022.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A Study on Algorithmic Construction of Two-Level Nonregular Designs with Strength Three

Ueda, A. and Yamada, S.

Proceedings of ANQ 2021 congress  2021.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Comparative survey of the effect of Occupational Health and Safety Management System certification

Kono, N., Kaneko, M., Saito, M, Makino, C. and Yamada, S.

Proceedings of ANQ 2021 congress  2021.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Appropriate customers definition and analysis in education towards achieving school excellence

Alauddin, N. and Yamada, S.

Proceedings of ANQ 2021 congress  2021.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Understanding activation of management system certification in society

Koyama, Y., Kaneko, M, Makino, C. and Yamada, S.

Proceedings of ANQ 2020 congress    1021 - 1028 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Discussion on Supersaturated Design and its Data Analysis Method in Computer Experiments

Ueda, A. and Yamada, S.

Proceedings of ANQ 2020 congress    549 - 556 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A Comparison of individual and simultaneous data of MEG and EEG concerned with component extraction of brain signal

Kawabata, Y. Asakawa, T., Hirono, M. and Yamada, S.

Proceedings of ANQ 2020 congress    567 - 574 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A research on application of Gaussian process regression for inverse estimation of nominal the best response

Nagashima, M and Yamada, S.

Proceedings of ANQ 2020 congress    604 - 611 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A survey of current status on activation of ISO 14001 certification in society

Kono, N., Kaneko, M, Makino, C. and Yamada, S.

Proceedings of ANQ 2020 congress    658 - 666 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Analysis of teaching and learning process based on a daily management

Alauddin, N. and Yamada, S.

Proceedings of ANQ 2020 congress    722 - 734 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Improvement of prediction error by signal-to-noise ratio in the Taguchi’s T-method

Jinguji, Y., Matsuura, S. and Yamada, S.

Proceedings of ANQ 2020 congress    836 - 843 2020.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A case study on integration of vehicle defect and recall information analysis

Yamamoto, Y. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Characteristics of explanatory variables in distinguishing the outcome of adverse events in JADER

Baku, H. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A survey of current status on activation of ISO 9001 certification in society

Koyama, Y., Kaneko, M., Komori, S. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A research on application of inverse estimation by Gaussian process regression to computer experiments

Nagashima, M. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Comprehensive understanding of main effects and interactions in Plackett Burman design

Oishi, Y. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Construction of experimental design considering accuracy and robustness in the estimation of factorial effects

Taguchi, Y. and Yamada, S.

Proceedings of ANQ 2019 congress  2019.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Evaluation on variation of confounding level in foldover designs

Taguchi, Y and Yamada, S.

Proceedings of ANQ 2018 congress    1000 - 1007 2018.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Practical comments on data collection and analysis for computer experiments

Onoda, K. and Yamada, S.

Proceedings of ANQ 2018 congress    45 - 51 2018.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Evaluation on alias relation of interactions in Plackett Burman design (N=20) and its application to guide assignments

Oishi, Y. and Yamada, S.

Proceedings of ANQ 2018 congress    373 - 380 2018.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Utilization and evaluation of failures in learning curve analysis

Oku, T., Hirano, K. and Yamada, S.

Proceedings of the 3rd International conference on production management 2017    39 - 42 2017.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Measuring task quality through technical-service support software

Takahashi, G. and Yamada, S.

Proceedings of ANQ 2016 Congress  2016.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

An approach to facilitate safety signal detection efforts in pharmaceutical R&D

Inoue, H. and Yamada, S.

Proceedings of QMOD 2015    1 - 10 2015.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Quantitative evaluation of lathe skill learning between skill elements

Oku, T., Irikura, N. and Yamada, S.

Proceedings of International Conference on Quality 2014  2014.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Application DOE to computer simulation at Development and Design stage for quality assurance,

Yamada, S.

Proceedings of International Conference on Quality 2014  2014.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Design criteria for exploring feasible region of factors in multi-dimensional space

Yamada, S.

Proceedings of ANQ 2014 Congress  2014.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Data oriented approach supporting minimization of side effects

Inoue, H. and Yamada, S.

Proceedings of QMOD 2013  2013.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A study of quality design for technical-service support software based on fitness evaluation for use

Takahashi, G. and Yamada, S.

Proceedings of ANQ 2011 congress  2011.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Design of experiments for exploring feasible region of factors in computer simulation

Yamada, S.

Proceedings of ANQ 2011 congress  2011.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Application of statistical tools in computer simulation

Yamada, S.

Proceedings of ANQ 2010 congress  2010.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Application of statistical tools in digital engineering for quality management

Yamada, S.

Proceedings of ANQ 2009 congress  2009.09

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Application of Process FMEA as a Performance Improvement Tool in Pharmaceutical Research

Inoue, H., Yamada, S.

Proceedings of ANQ 2008 Congress  2008.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

The essence of Japanese TQM and American Six Sigma

Yamada, S.

Proceedings of ISI meeting in 2007  2007.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Quality management in Digital Engineering

Yamada, S.

Proceedings of QMOD conference 2007  2007.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A globalization dilemma in Japanese quality management

Yamada, S.

Proceedings of QMOD conference 2006    1 - 10 2006.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Essence of Japanese TQM and Six Sigma

Yamada, S.

roceedings of QMOD conference 2005    107 - 115 2005.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

An application of supersaturated design in computer experiments

Iwata, M. and Yamada, S.

Proceedings of 18th Asia Quality Symposium    1 - 7 2004.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A comparative study of costs and sales impacts of ISO 9001 certification between Mexico and Japan

Yamada, S. and Hirata, R.

Proceedings QMOD conference 2004    1 - 7 2004.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Implementation of ISO 9000 in medium and small-sized enterprises: An empirical study in terms of costs and sales impact

Yamada, S., Chiba, M. and Seguchi, H.

Proceedings of QMOD conference 2003    1 - 8 2003.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Estimation of costs and profits on ISO 9000 certification by questionnaire surveys

Yamada, S.

Proceedings of 14th Annual Quality Management Conference    1 - 13 2002.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Contemporary quality management in Japan

Yamada, S.

Proceedings of the 7th annual international conference on Industrial Engineering    558 - 561 2002.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Costs and Profits of ISO 9000 certification

Yamada, S.

Proceedings of QMOD 2002    235 - 241 2002.09

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Costs and sales impacts of ISO 9000 certification in Japanese manufactures

Chiba, M., Yamada, S. and Fukuda, T.

Proceedings of the 16th Asia Quality Symposium    1 - 12 2002.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Economical aspect of ISO 9000 certification

Yamada, S.

Proceedings of 3rd Multinational Alliance for the Advancement of Organizational Excellence Conference  2002.08

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

An application of supersaturated design to the parameter design

Yoshida, K., Yamada, S., Takahashi, T. and Lin, D. K. J.

Proceedings of 15th Asia Quality Symposium, Seoul    49 - 52 2001.10

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Expenses estimation for ISO 9000 certification in Japanese manufacturing companies by a questionnaire survey

Yamada, S.

Proceedings QMOD conference 2001    255 - 261 2001.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A model for profits brought by ISO 9000 certification

Yamada, S.

Proceedings of 15th Asia Quality Symposium    210 - 213 2001.09

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Expenses estimation for ISO 9000 certification in Japanese manufacturing companies by a questionnaire survey

Yamada. S.

Proceedings of the Sino-Korean international conference    20 - 26 2001.06

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Economical aspects of ISO 9000 certification in Japanese companies

Yamada. S.

Proceedings of the 55th Annual Quality Congress    1 - 13 2001.05

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Some comments on idea generation for quality creation

Yamada, S.

Proceedings of the Institute for Operations Research and Management Science 2000, TA    1 - 6 2000.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A questionnaire survey on the expenses of certification of ISO 9000

Fukuda, T. and Yamada, S.

Proceedings of 14th Asia Quality Symposium    23 - 26 2000.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

An approach of data analysis for estimation of expenses and profits of ISO 9000 certification

Yamada, S.

Proceedings of 14th Asia Quality Symposium    36 - 39 2000.09

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A selection method of an active factor by linear regression and its robustness against correlation of collected data

Yamada, S., and Harashima, J.

Proceedings of the section on Physical and Engineering Sciences 2000, American Statistical Association    142 - 147 2000.08

Research paper (international conference proceedings), Joint Work, Last author, Accepted

Estimation of expenses and profits of certification of ISO 9000

Yamada, S.

Proceedings of QMOD conference 2000    499 - 505 2000.06

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Multiresponse design criteria on the model misspecification and their applications to conjoint analysis

Yamada, S.

Proceedings the 3rd Asia Pacific Conference on Industrial Engineering and Management Systems    396 - 400 2000.05

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A data analysis of financial indices in view of expenses for certification of ISO 9000

Yamada, S.

Proceedings of 13th Asia Quality Symposium    110 - 113 1999.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Case study of estimation of expenses for certification of ISO 9000

Yamada, S.

Proceedings of QMOD conference 1999, A1    1 - 8 1999.09

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

A correct screening method and its robustness against correlation between factors

Harashima, J. and Yamada, S.

Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems    267 - 270 1999.09

Research paper (international conference proceedings), Joint Work, Last author, Accepted

A new class of multiresponse design of experiments and its application to conjoint analysis

Yamada, S.

Proceedings of International Conference of Production Research, Vol. 2    1754 - 1757 1997.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Attractive quality creation, task achievement and idea generation

Yamada, S.

Proceedings of International Symposium of QC Circles, S3    1 - 13 1996.11

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

Multiresponse design of experiments based on the simultaneous optimization techniques

Yamada, S.

Proceedings of International Conference of Quality, Yokohama    551 - 554 1996.10

Research paper (international conference proceedings), Joint Work, Lead author, Accepted

ISO 9000, TQM and quality awards

Kano, N. and Yamada, S.

Proceedings of 39th European Organization for Quality Annual Congress, Vol. 1    172 - 178 1995.05

Research paper (international conference proceedings), Joint Work, Last author, Accepted