Presentations -

金属製スチーム混合ガス急速凝縮器によるウルトラファインバブル水製造

田口虹太，Benjamin Rahimian，寺坂宏一，藤岡沙都子

混相流シンポジウム2023 (北海道大学札幌キャンパス工学部) , 

2023.08

, 

Poster presentation, 日本混相流学会

屈曲型スタティックミキサーによる油滴微細化に及ぼす流体粘度の影響

峰尾裕稀，藤岡沙都子，池田信章，寺坂宏一

混相流シンポジウム2023 (北海道大学札幌キャンパス工学部) , 

2023.08

, 

Poster presentation, 日本混相流学会

T 字型合流による液液スラグ流形成時の内部流動解析

平田有理冴，藤岡沙都子，寺坂宏一

混相流シンポジウム2023 (北海道大学札幌キャンパス工学部) , 

2023.08

, 

Poster presentation, 日本混相流学会

高粘性流体混合のための低レイノルズ数領域における振動流バッフル反応器の運転条件最適化

八木 勇樹, 藤岡 沙都子, 堀江 孝史, 寺坂 宏一

化学工学会山形大会2023 (山形テルサ) , 

2023.08

, 

Oral presentation (general),  公益社団法人化学工学会東北支部

ニューラルネットワーク技術を用いた円形マイクロチャネル内の液液二相流の流動パターンの予測

岩本 昂大, 村上 裕哉, 藤岡 沙都子, 寺坂 宏一

化学工学会山形大会 (山形テルサ) , 

2023.08

, 

Oral presentation (general), 化学工学会東北支部

Supply of ultrafine bubble water through long pipelines to vast agricultural areas

Kurumi NAKAJIMA, Koichi Terasaka

The 7th International Symposium on Plasma & Fine Bubbles to Agriculture and Aquaculture (7th ISPFB 2023) (Iwate University, Morioka, JAPAN) , 

2023.05

, 

Oral presentation (general),  7th ISPFB2023 International Organizing Committee

ファインバブルの基礎と特有の物性および産業応用

寺坂宏一

日本薬剤学会第38年会 (名古屋　ウインク愛知　愛知県産業労働センター) , 

2023.05

, 

Public lecture, seminar, tutorial, course, or other speech, 公益社団法人日本薬剤学会

ファインバブルのタネから未来のモノづくり

寺坂宏一

未来モノづくり国際EXPO2023FBIAセミナー (インテックス大阪) , 

2023.05

, 

Public lecture, seminar, tutorial, course, or other speech,  未来モノづくり国際EXPO実行委員会

Ultrafine bubble generation in condensate of steam accompanying with gas

Koichi Terasaka, Kota Taguchi, Satoko FUJIOKA, Tomoya Tetsuka

The 11th International Conference on Multiphase Flow (Kobe Japan) , 

2023.04

, 

Oral presentation (general), ICMF Organizing Committee

Ultrafine bubble loss in water passing through a long plastic tube

Kurumi Nakajima, Hanako Sasaki, Koichi Terasaka, Satoko Fujioka, Shun Harada, Adam Donaldson

The 11th International Conference on Multiphase Flow (Kobe Japan) , 

2023.04

, 

Oral presentation (general), ICMF Organizing Committee

Hydrodynamics of liquid-liquid slug flow in circular channels: The effects of fluid properties and channel geometries

Satoko Fujioka,Arisa Hirata,Tomoya Tetsuka, Koichi Terasaka

The 11th International Conference on Multiphase Flow (Kobe Japan) , 

2023.04

, 

Oral presentation (general), ICMF Organizing Committee

An in-situ method for determining rheological properties of non-Newtonian fluids flowing in a circular cylinder by measuring pressure drop

Nobuaki Ikeda, Ayuri Kimoto, Satoko Fujioka, Koichi Terasaka

the 11th International Conference on Multiphase Flow (Kobe, Japan) , 

2023.04

, 

Oral presentation (general), ICMF Organizing Committee

ウルトラファインバブル水の生成と評価の基礎と最先端

寺坂宏一

第8回ファインバブル学会連合シンポジウム「ファインバブルの原理から多様な応用展開」 (zoom ウェビナー) , 

2022.12

, 

Symposium, workshop panel (nominated), ファインバブル学会連合

クリーン空気ウルトラファインバブル水の貯蔵・希釈・輸送・除去

寺坂宏一

第18回ファインバブル国際シンポジウム (慶應義塾大学 三田キャンパス 北館ホール) , 

2022.12

, 

Symposium, workshop panel (nominated), ファインバブル産業会

ガスと水の混合蒸気の急速凝縮水中でのウルトラファインバブル生成

寺坂宏一

H2Oを科学する・2022 (リモート開催) , 

2022.12

, 

Symposium, workshop panel (nominated), 北海道大学低温科学研究所

Development of in-line measuring method of rheological properties for non-Newtonian food fluids

Nobuaki Ikeda, Ayuri Kimoto, Satoko Fujioka, Koichi Terasaka

The 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 57th Summer Symposium on Powder Technology（ICCCI2022) (Fujiyoshida, Japan) , 

2022.11

, 

Oral presentation (general)

ファインバブルテクノロジーの産業応用と普及

寺坂宏一

2022 洗浄総合展FBIAセミナー『ファインバブル洗浄　～その科学と応用事例～』 (東京ビッグサイト　西ホール) , 

2022.10

, 

Oral presentation (keynote), ファインバブル産業会

Batch generation of ultrafine bubbles in water by rapid condensation of steam and gas mixture

Koichi Terasaka

4th International Symposium on Multiscale Multiphase Process Engineering (Berlin/Germany) , 

2022.09

, 

Oral presentation (general), MMPE Organizing Committee

　View Summary

At the 4th International Symposium on Multiscale Multiphase Process Engineering (MMPE), recent research progress on nano-, micro- and macro-scale aspects of multiphase process engineering will be presented and discussed. A strong emphasis is put on application-oriented research, bridging the gap between scientific findings and methodology and the requirements of industry.

Multiscale, multiphase processes occur in the chemical, pharma and food industry, but their understanding and modelling poses a challenge both to those who design and develop new processes and those who run them in the industry. Within the last decade remarkable progress has been made in nanotechnology, micro process engineering, numerical simulation and measurement techniques providing a deeper insight into an undiscovered world of multiscale phenomena. To discuss the tremendous effects of multiscale phenomena in multiphase process engineering, researchers, chemical and process engineers, chemists and data scientist will come together. Young scientists and students are especially encouraged to participate and become part of the vibrant expert network of MMPE.

The International symposium on Multiscale Multiphase Process Engineering (MMPE) is held biannually alternately in Germany and Japan and regular attracts more than 100 participants from all over the world.

Continuous measurement of rheological properties of non-Newtonian food fluids by using a pressure difference

Nobuaki Ikeda, Ayuri Kimoto, Satoko Fujioka, Koichi Terasaka

4th International Symposium on Multiscale Multiphase Process Engineering (Berlin/Germany) , 

2022.09

, 

Poster presentation, MMPE Organizing Committee

　View Summary

At the 4th International Symposium on Multiscale Multiphase Process Engineering (MMPE), recent research progress on nano-, micro- and macro-scale aspects of multiphase process engineering will be presented and discussed. A strong emphasis is put on application-oriented research, bridging the gap between scientific findings and methodology and the requirements of industry.

Multiscale, multiphase processes occur in the chemical, pharma and food industry, but their understanding and modelling poses a challenge both to those who design and develop new processes and those who run them in the industry. Within the last decade remarkable progress has been made in nanotechnology, micro process engineering, numerical simulation and measurement techniques providing a deeper insight into an undiscovered world of multiscale phenomena. To discuss the tremendous effects of multiscale phenomena in multiphase process engineering, researchers, chemical and process engineers, chemists and data scientist will come together. Young scientists and students are especially encouraged to participate and become part of the vibrant expert network of MMPE.

The International symposium on Multiscale Multiphase Process Engineering (MMPE) is held biannually alternately in Germany and Japan and regular attracts more than 100 participants from all over the world.

Continuous generation of ultrafine bubble water by rapid condensation of steam and non-condensable gas mixture

Kouta Taguchi, Koichi Terasaka, Satoko Fujioka

4th International Symposium on Multiscale Multiphase Process Engineering (Berlin/Germany) , 

2022.09

, 

Oral presentation (general), MMPE Organizing Committee

　View Summary

At the 4th International Symposium on Multiscale Multiphase Process Engineering (MMPE), recent research progress on nano-, micro- and macro-scale aspects of multiphase process engineering will be presented and discussed. A strong emphasis is put on application-oriented research, bridging the gap between scientific findings and methodology and the requirements of industry.

Multiscale, multiphase processes occur in the chemical, pharma and food industry, but their understanding and modelling poses a challenge both to those who design and develop new processes and those who run them in the industry. Within the last decade remarkable progress has been made in nanotechnology, micro process engineering, numerical simulation and measurement techniques providing a deeper insight into an undiscovered world of multiscale phenomena. To discuss the tremendous effects of multiscale phenomena in multiphase process engineering, researchers, chemical and process engineers, chemists and data scientist will come together. Young scientists and students are especially encouraged to participate and become part of the vibrant expert network of MMPE.

The International symposium on Multiscale Multiphase Process Engineering (MMPE) is held biannually alternately in Germany and Japan and regular attracts more than 100 participants from all over the world.