-
Affiliation
-
Faculty of Science and Technology (Mita)
-
Position
-
Professor Emeritus
KEIO RESEARCHERS INFORMATION SYSTEM |
Details of a Researcher
このページはJavascriptを使用しています。すべての機能を使用するためにはJavascript を有効にする必要があります。
Yamada, Kunihiro
|
|
慶應義塾大学(工学部) ,助手
米国シラキュース大学 ,博士研究員
慶應義塾大学(工学部) ,専任講師
兼慶應義塾大学(機械工学科) ,教室幹事
慶應義塾大学(理工学部) ,助教授
Keio University, Faculty of Engineering, 機械工学科
University, Graduated
Keio University, Graduate School, Division of Engineering, 機械工学専攻
Graduate School, Completed, Master's course
Keio University, Graduate School, Division of Engineering, 機械工学専攻
Graduate School, Completed, Doctoral course
機械学会第9章3,5.e〜f
1984
Scope: 122-123
破壊力学実験法,5章3節
朝倉書店, 1984
Scope: 173-186,190
機械学会機械工学SIマニュアル例題11,14,16
1979
Influence of yield strength levels on crack growth mode in delayed fracture of structural steels
YAMADA KUNIHIRO
J. Engineering Fracture Mechanics (Elsevier Ltd.) 75 551-559 2008.02
Research paper (conference, symposium, etc.), Joint Work, Accepted
Mechanisitic Aspects of Delayed Frcture of Thin Plate and Thin Walled Hollow Specimen Subjected to Sustained Loading
YAMADA KUNIHIRO
日本 機会学会論文集 A編 69巻 688号 2003-12,1717-1722 A編 69 ( 688 ) 1717-1722 2003.12
Research paper (conference, symposium, etc.), Joint Work, Accepted
Mechanistic aspects of hydrogen damage in fatigue fracture of high strength bolt steel
Kaneuchi Naoki, Suzuki Toshirou and Yamada Kunihoro
Proc. of the 14th European Conference on Fracture, Cracow, Poland Vol.Ⅱ 95-102 2002.09
Joint Work
Development of Quasi-cleavage Crack Leading to Fracture of Hydrogen Charged High Strength Steel
小柳 貢士,鈴木 哲也,山田 邦博
材料(J.Soc.Mat.Sci.,Japan) 51 ( 5 ) 561-566 2002.05
Joint Work
Hot-pressed Ti-Al target for synthesizing Til-x-AlxN films by arc ion plating method
A. Kimura, T. Murakami, K. Yamada and T. Suzuki
Thin Solid Films Vol.382 101-105 2001
Joint Work
Microstructural approach to fatigue behavior of induction-hardened steel
Yamada, Kunihiro
Proceedings of the Fujihara Memorial Faculty of Engineering Keio University (慶応義塾大学藤原記念工学部) 20 ( 81 ) 218(42) - 218(42) 1967
高温低サイクル疲労における試験温度と酸化の関連について
日本機械学会,
S2OC焼き入れ戻し組織中の微小き裂進展挙動について
日本機械学会,
鋼の遅れ破壊における水素添加条件と破面形態の関係
日本機械学会,
高温低サイクル疲労のき裂生成過程における酸化と粒界析出物の関連について
谷田部洋,山田邦博
日本機械学会,
遅れ破壊過程における初期き裂・擬へき開割れの生成条件
百瀬慶太,川地俊一,山田邦博
日本機械学会/平成5年度材力部門講演会,
日本鉄鋼協会:特基研究会「高強度鋼の遅れ破壊部会」
STRENGTH '93組織委員会実行委員会
International Committee on 'Short Fatigue Cracks',
International Journal, 'Fatigue of Engineering Mat
International Committee for International Conferen
日本機械学会第二出版部会(第77期),
日本機械学会材料力学部門第1技術委員会(第77期),
日本機械学会材料力学部門第1技術委員会(第76期),
日本機械学会材料力学部門第9技術委員会,
日本機械学会第二出版部会(第71期),
校閲委員, 日本機械学会第二出版部会(第77期)
委員, 日本機械学会材料力学部門第1技術委員会(第77期)
委員, 日本機械学会材料力学部門第1技術委員会(第76期)
委員長, 日本機械学会材料力学部門第9技術委員会
校閲委員, 日本機械学会第二出版部会(第71期)