Papers - Komotori, Jun
-
高疲労特性を有する自溶合金溶射部材作製のための有効な再溶融処理方法の提案
曙紘之，小茂鳥潤，清水真佐男
日本機械学会論文集（A編） 76 ( 767 ) 839-845 2010
Research paper (scientific journal), Joint Work
-
Effect of hardness ratio on plastic dissipation in fine particle peening
M. Omiya, S. Kikuchi, Y. Hirota, J. Komotori
Journal of Solid Mechanics and Materials Engineering 4 ( 11 ) 1585-1594 2010
Research paper (scientific journal), Joint Work
-
Investigation on high-temperature oxidization of mirror-quality ground stainless steel
K. Katahira, H. Ohmori, M. Mizutani, J. Komotori
International Journal of Modern Physics B 24 ( 15＆16 ) 3005-3010 2010
Research paper (scientific journal), Joint Work
-
Modification of surface properties on a nitride based coating films through mirror-quality finish grinding
K. Katahira, H. Ohmori, J. Komotori, D. Dornfeld, H. Kotani, M. Mizutani
Annals of the CIRP 59 ( 1 ) 593-596 2010
Research paper (scientific journal), Joint Work
-
Adhesion of osteoblast-like cells on nanostructured hydroxyapatite
S.Okada, H.Ito, A.Nagai, J.Komotori, H.Imai
Acta Biomaterialia 6 591 - 597 2010
Research paper (scientific journal), Joint Work
-
タテジマフジツボのキプリス幼生付着器官の寸法と測定方法の検討
勝山一朗，小林聖治，平杉亜希，小茂鳥潤
The Sessile Organisms Society of Japan 26 ( 2 ) 89-92 2009
Research paper (scientific journal), Joint Work
-
Effect of micro ploughing during fine particle peening process on the microstructure of metallic materials
Y. Kameyama, J. Komotori
Journal of Materials Processing Technology 209 ( 20 ) 6146-6155 2009
Research paper (scientific journal), Single Work
-
Effect of simultaneous surface modification process on wear resistance of martensitic stainless steel
S. Kikuchi, A. Sasago, J. Komotori
Journal of Materials Processing Technology 209 ( 20 ) 6156-6160 2009
Research paper (scientific journal), Joint Work
-
タテジマフジツボキプリス幼生の基材選択性と付着に及ぼす微細凹凸表面形状の影響
堀内麗子，小林聖治，亀山雄高，水谷正義，小茂鳥潤，勝山一朗
材料と環境 58 ( 8 ) 302-307 2009
Research paper (scientific journal), Joint Work
-
Wear Resistance of AISI316L Steel Modified by Pre-FPP Treated DLC Coating
H. Nanbu, S. Kikuchi, Y. Kameyama, J. Komotori
Journal of Solid Mechanics and Materials Engineering 3 ( 2 ) 328-335 2009
Research paper (scientific journal), Joint Work
-
Surface generation of superior hydrophilicity for surgical steels by specific grinding parameters
H. Ohmori, K. Katahira, J. Komotori, Y. Akahane, M. Mizutani, T. Naruse
CIRP Annals-Manufacturing Technology 58 503-506 2009
Research paper (scientific journal), Joint Work
-
Effect of fine particle peening treatment prior to nitriding on fatigue properties of AISI 4135 steel
S. Kikuchi, J. Komotori
Journal of Solid Mechanics and Materials Engineering 2 ( 11 ) 1444-1450 2008
Research paper (scientific journal), Joint Work
-
高周波誘導加熱を利用したIHFPP 処理システムの構築とそれによるS45C 鋼の表面改質
笹子敦司，菊池将一，亀山雄高，小茂鳥潤，深沢剣吾，三阪佳孝，川嵜一博
日本金属学会誌 72 ( 5 ) 347-352 2008
Research paper (scientific journal), Joint Work
-
Fatigue strength and fracture mechanism of different post-fused thermal spray-coated steels with a Co-based self-fluxing alloy coating
J. Oh, J. Komotori, J. Song
International Journal of Fatigue 30 ( 8 ) 1441-1447 2008
Research paper (scientific journal), Joint Work
-
Functionalization of stainless steel surface through mirror-quality finish grinding
H. Ohmori, K. Katahira, J. Komotori, M. Mizutani
Annals of the CIRP 57 ( 1 ) 545-549 2008
Research paper (scientific journal), Joint Work
-
電解インプロセスドレッシング(ELID)研削を利用したチタン合金の表面改質加工とその効果
水谷正義，山本聡一，小茂鳥潤，片平和俊，大森整
材料 57 ( 9 ) 887-892 2008
Research paper (scientific journal), Joint Work
-
表面改質加工法によるチタン合金の表面機能制御
水谷正義，小茂鳥潤，片平和俊，大森整
材料試験技術 53 ( 4 ) 254-260 2008
Research paper (scientific journal), Joint Work
-
Microstructural change induced by fine particle peening and its effect on elemental diffusion
Y. Hirota, S. Kikuchi, J. Komotori
Journal of Solid Mechanics and Materials Engineering 2 ( 10 ) 1330-1337 2008
Research paper (scientific journal), Joint Work
-
Effect of fine particle peening (FPP) conditions on microstructural characteristics of Ti-6AI-4V alloy
Y. Kameyama, J. Komotori
Journal of Solid Mechanics and Materials Engineering 2 ( 10 ) 1338-1347 2008
Research paper (scientific journal), Joint Work
-
砥石ボンド材の電解現象を利用した表面改質加工法に関する研究
KOMOTORI JUN
砥粒加工学会誌 51 ( 6 ) 333-338 2007.06
Research paper (scientific journal), Joint Work, Accepted