Details of a Researcher

Presentations -

Division display >> ／ All the affair displays 1 - 257 of about 257

Exploring Cross-Modal Taste Perception Under Coloured Virtual Lighting Environments

Ying Qu, Takeo Kato

[International presentation] IASDR2025 (International Association of Societies of Design Research Conference) (台北) ,

2025.12

Oral presentation (general), International Association of Societies of Design Research

Effects of Lighting Color on Physiology, Psychology, and Behavioral Responses

Siwen YAN, Takeo KATO, Nobuyuki FUKUI, Kenta KUBO, Yoshiaki MATSUBA, Genya KUROHARA

[Domestic presentation] 2025Y Autumn Research Presentation Lecture (DEJIMA MESSE NAGASAKI) ,

2025.11

Oral presentation (general), Japan Society for Design Engineering

Relationship Analysis Between Features of Tire Tread Images and Sensory Evaluation

Kazuki Kouda, Ren HAYAKAWA, Takeo KATO

[Domestic presentation] 2025Y Annual Conference (Hokkaido University, Sapporo Campus) ,

2025.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Suggestion of cushioning material and design of Head Protection Gear to Prevent Severe Head Injuries in Judo Accidents

Shinnosuke ARAKI, Takeo KATO, Masaki OMIYA, Takeshi KAMITANI, Humiyuki MATSUNO

[Domestic presentation] The 35th Design Engineering & Systems Division Lecture (Meiji University, Sutugadai Campus) ,

2025.09

Oral presentation (general), The Japan Society of Mechanical Engineers

The Relationship between Crossmodal Correspondence in the “Complexity” of Vision and Auditory and Aesthetic Preference

Kohei OSUGI, Takeo KATO, Jumpei HAYASHI, Hideyoshi YANAGISAWA

[Domestic presentation] The 35th Design Engineering & Systems Division Lecture (Meiji University, Sutugadai Campus) ,

2025.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Quantification of novelty for three-dimensional shapes based on free-energy principle and its application for aesthetic liking

Yuto IEDA, Takeo KATO

[Domestic presentation] The 35th Design Engineering & Systems Division Lecture (Meiji University, Sutugadai Campus) ,

2025.09

The Japan Society of Mechanical Engineers

Aesthetic Preference in Closed Planar Curves Based on EVE’ Theory

Takeo Kato, Junpei Hayashi,Takemasa Ito

[International presentation] ICDES 2025 The 6th International Conference on Design Engineering and Science (Alexandria, Egypt) ,

2025.08

Oral presentation (general), Japan Society for Design Engineering

Fatigue Reduction Effects in Sitting Posture Correction System Using Avatar Robot

Rina Morohashi, Hayato Uchida, Keisuke Nakaji, Takeo Kato and Akinari Hirao

[International presentation] ICDES 2025 The 6th International Conference on Design Engineering and Science (Alexandria, Egypt) ,

2025.08

Oral presentation (general), Japan Society for Design Engineering

The Influence of Crossmodal Correspondence in the “Complexity” of Shape and Tone Sequence on Aesthetic Preference

Kohei Osugi, Takeo Kato, Jumpei Hayashi and Hideyoshi Yanagisawa

[International presentation] ICDES 2025 The 6th International Conference on Design Engineering and Science (Alexandria, Egypt) ,

2025.08

Oral presentation (general), Japan Society for Design Engineering

Effects of Visual Analogy in Design Task on Brain Functional Connectivity Related to Creative Thinking

Kentaro MAETA, Takeo KATO, Kazutaka UEDA

[Domestic presentation] The 72nd Spring Meeting (Sapporo City University) ,

2025.06

Oral presentation (general), Japanese Society for the Science of Design

Neural Activity Analysis on Effects of Visual and Non-Visual Functions on Alertness Light on Alertness

Arata KAMBAYASHI, Haruki MORIOKA, Takeo KATO

[Domestic presentation] 2025Y Spring Research Presentation Lecture (Nihon University, Funabashi Campus) ,

2025.05

Oral presentation (general), Japan Society for Design Engineering

Analysis of the Relationship between Internal Biomechanical Load and Subjective Fatigue for a Seated Posture Improvement System

Keisuke NAKAJI, Rina MOROHASHI, Hayato UCHIDA, Takeo KATO, Akinari HIRAO

[Domestic presentation] 2025Y Spring Research Presentation Lecture (Nihon University, Funabashi Campus) ,

2025.05

Oral presentation (general), Japan Society for Design Engineering

Effects of Sitting Posture Improvement System Using Avatar Robot on Fatigue Reduction

Rina MOROHASHI, Hayato UCHIDA, Takeo KATO, Akinari HIRAO

[Domestic presentation] The 20th Spring Meeting of the Japan Society of Kansei Engineering (Kyoto Institute of Technology) ,

2025.03

Oral presentation (general), Japan Society of Kansei Engineering

Verification of Crossmodal Correspondences Between Vibrotactile and Colors Stimuli on stress

Asuka HIRATA, Daniel HORST, Kentaro MAETA, Takeo KATO

[Domestic presentation] The 20th Spring Meeting of the Japan Society of Kansei Engineering (Kyoto Institute of Technology) ,

2025.03

Poster presentation, Japan Society of Kansei Engineering

Emotion evoked by motion presented in peripheral visual field

Yamato MIYASHITA, Yasuhito SAWAHATA, Masamitsu HARASAWA, Akihiro SAKAI, Kazuteru KOMINE, Takeo KATO

[Domestic presentation] The 20th Spring Meeting of the Japan Society of Kansei Engineering (Kyoto Institute of Technology) ,

2025.03

Oral presentation (general), Japan Society of Kansei Engineering

Crossmodal Correspondences Between Taste and Vision Regarding Complexity of Shape

Aika Yukimoto, Jumpei Hayashi, Takeo Kato, Hideyoshi Yanagisawa

[International presentation] KEER (International Conference on Kansei Engineering and Emotion Research) 2024 (Taichung City, Taiwan) ,

2024.11

Poster presentation, the Kansei Engineering and Emotion Research

Identifying Key Issues in Building a Multi-Sided Non-Medical Digital Healthcare Platform Through Pretotyping

Masako TORIYA, Takeo KATO, Wataru TAKANO, Chizuru NAKAJIMA, Shingo KAWAI, Yutaro HORI

[Domestic presentation] 2024Y Annual Conference of Japan Society for Management Information (Seinan Gakuin University) ,

2024.11

Oral presentation (general), Japan Society for Management Information (JASMIN)

Access to Document (DOI)

Trials on the quantification of aesthetic preferences using image features of videos

Ren HAYAKAWA, Yuki SHIMIZU, Takeo KATO, Yasuji FUKASAWA, Aichi INOUE

[Domestic presentation] The 34th Design Engineering & Systems Division Lecture (Osaka Metropolitan University, Nakamozu Campus) ,

2024.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Analyzing the effect of cutaneous and kinesthetic sensation on softness perception using TetraPEG gel

Aika YUKIMOTO, Takeo KATO, Takuya KATASHIMA, Yuka ODA, Makoto ASAI

[Domestic presentation] The 34th Design Engineering & Systems Division Lecture (Osaka Metropolitan University, Nakamozu Campus) ,

2024.09

Oral presentation (general), The Japan Society of Mechanical Engineers

A Preference Set-Based Design Method for Qualitative Evaluation A Case Study on Automotive EC Data

Shotaro OYAMA, Takeo KATO

[Domestic presentation] The 34th Design Engineering & Systems Division Lecture (Osaka Metropolitan University, Nakamozu Campus) ,

2024.09

Oral presentation (general), The Japan Society of Mechanical Engineers

The Lower Leg Swelling Measurement during Driving Posture by Bioimpedance Method and Construction of Prediction Equation of the Lower Leg Swelling by Thigh Pressure

Fuka KAJITANI, Takeo KATO, Akinari HIRAO

[Domestic presentation] The 34th Design Engineering & Systems Division Lecture (Osaka Metropolitan University, Nakamozu Campus) ,

2024.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Influence of Regularity Recognition on Shape Aesthetics –Varidation of Free Energy Model using Primitive Shapes–

Kazuha SAWADA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 26th Annual Meeting of the Japan Society of Kansei Engineering (Tower Hall Funabori) ,

2024.09

Oral presentation (general), Japan Society of Kansei Engineering

The influence of crossmodal correspondence on aesthetic prefrences in the "complexity" of shapes and sound sequnces

Kohei OHSUGI, Jyunpei HAYASHI, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 26th Annual Meeting of the Japan Society of Kansei Engineering (Tower Hall Funabori) ,

2024.09

Oral presentation (general), Japan Society of Kansei Engineering

Index for Quantifying "Order" in Three-Dimensional Shapes Using Curvature and Its Application to Quantifying "Aesthetic Preferences"

Yuto IEDA, Takahiro SHIMIZU, Takeo KATO

[Domestic presentation] The 26th Annual Meeting of the Japan Society of Kansei Engineering (Tower Hall Funabori) ,

2024.09

Oral presentation (general), Japan Society of Kansei Engineering

Proposal for Fatigue Status Presentation to Enhance Communication in Offices

Rina Morohashi, Hayato Uchida, Takeo Kato, Hidekazu Nishimura, Masako Toriya

[International presentation] The 22nd Triennial Congress of the International Ergonomics Association (IEA2024) (Jeju, KOREA) ,

2024.08

Oral presentation (general), The International Ergonomics Association

Investigating the Impact of Vibrotactile and Color Visual Stimuli on Human Mental Stress Responses after Shock Scenarios

Daniel Horst, Asuka Hirata, Hayato Uchida, Takeo Kato

[International presentation] The 22nd Triennial Congress of the International Ergonomics Association (IEA2024) (Jeju, KOREA) ,

2024.08

Oral presentation (general), The International Ergonomics Association

Construction of Prediction Equations for Lower Leg Swelling in the Driving Posture

Fuka Kajitani, Takeo Kato, Akinari Hirao

[International presentation] The 22nd Triennial Congress of the International Ergonomics Association (IEA2024) (Jeju, KOREA) ,

2024.08

Oral presentation (general), The International Ergonomics Association

Quantification of Aesthetic Preferences Using Image Features of Videos

Ren Hayakawa, Yuki Sshimizu, Takeo Kato, Yasuji Fukasawa, Aichi Inoue

[International presentation] The 20th International Conference on Machine Design and Production (UMTIK 2024) (Ankara, Türkiye) ,

2024.08

Oral presentation (general), UMTIK Organizing Committee

Multilingual Communication Robot Using Language Detection System

Kei Matsuoka, Yuki Kida, Takeo Kato, Tetsuro Ogi

[International presentation] The 20th International Conference on Machine Design and Production (UMTIK 2024) (Ankara, Türkiye) ,

2024.08

Oral presentation (general), UMTIK Organizing Committee

Numerical Approach of Time-axis Design Method - Validation through an Application for Chair Design

Akinari Hirao, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] The 20th International Conference on Machine Design and Production (UMTIK 2024) (Ankara, Türkiye) ,

2024.08

Oral presentation (general), UMTIK Organizing Committee

Proposal of A Preference Set-Based Design Method for Qualitative Evaluation

Shotaro Oyama, Takeo Kato

[International presentation] The 20th International Conference on Machine Design and Production (UMTIK 2024) (Ankara, Türkiye) ,

2024.08

Oral presentation (general), UMTIK Organizing Committee

Investigation of crossmodal correspondence between visual vibratory stimuli and color choice

Jan Daniel Horst, Takeo Kato, Jumpei Hayashi

[International presentation] 15th International Conference on Applied Human Factors and Ergonomics (AHFE 2024) (Nice, France) ,

2024.07

Oral presentation (general), AHFE International Conference

Effects of visual analogy in design task on brain functional connectivity related to creative thinking

Kentaro Maeta, Takeo Kato, Kazutaka Ueda

[International presentation] 15th International Conference on Applied Human Factors and Ergonomics (AHFE 2024) (Nice, France) ,

2024.07

Oral presentation (general), AHFE International Conference

Sitting Posture Improvement System Using Avatar Robot

Rina MOROHASHI, Hayato UCHIDA, Takeo KATO, Akinari HIRAO

[Domestic presentation] The 71st Spring Meeting (Kyushu Sangyo University) ,

2024.06

Oral presentation (general), Japanese Society for the Science of Design

Elucidation of the laws inherent in shapes that people find attractive

Taisuke KAWASAKI, Takeo KATO, Yusuke ASHIZAWA

[Domestic presentation] The 71st Spring Meeting (Kyushu Sangyo University) ,

2024.06

Poster presentation, Japanese Society for the Science of Design

Influence of regularity recognition on shape aesthetics

Kazuha SAWADA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 71st Spring Meeting (Kyushu Sangyo University) ,

2024.06

Oral presentation (general), Japanese Society for the Science of Design

Generative Method for Designing ”Motions” of Artifacts bringing Curiosity and interest

Shimon HONDA, HIdeyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 71st Spring Meeting (Kyushu Sangyo University) ,

2024.06

Oral presentation (general), Japanese Society for the Science of Design

Analysis of the relationship between analogical distance and free energy in design-by-analogy and a keyword generation system

Shinnosuke ARAKI, Takeo KATO

[Domestic presentation] 2024Y Spring Research Presentation Lecture (HOSEI University, Koganei Campus) ,

2024.05

Oral presentation (general), Japan Society for Design Engineering

Effects of Visual Analogy in Design Task on Brain Functional Connectivity Related to Creative Thinking

Kentaro MAETA, Takeo KATO, Kazutaka UEDA

[Domestic presentation] 2024Y Spring Research Presentation Lecture (HOSEI University, Koganei Campus) ,

2024.05

Oral presentation (general), Japan Society for Design Engineering

Generative Method for Motion Design bringing Curiosity and Interest ー Kansei Design of Motion and Structure of Artifacts based on the Inquiry Cycle ー

Shimon HONDA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 19th Spring Meeting of the Japan Society of Kansei Engineering (Kyushu University, Ohashi Campus) ,

2024.03

Oral presentation (general), Japan Society of Kansei Engineering

Investigating Crossmodal Correspondences Between Vibrotactile Stimuli and Colors

Daniel HORST, Junpei HAYASHI, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 19th Spring Meeting of the Japan Society of Kansei Engineering (Kyushu University, Ohashi Campus) ,

2024.03

Oral presentation (general), Japan Society of Kansei Engineering

Complexity Mediated Cross-modal Correspondence between Tone Sequences and Shapes

Junpei HAYASHI, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 19th Spring Meeting of the Japan Society of Kansei Engineering (Kyushu University, Ohashi Campus) ,

2024.03

Oral presentation (general), Japan Society of Kansei Engineering

Smart Office Requirements Analysis and Design of Seated Posture Sensing System

Rina MOROHASHI, Shota ETO, Hayato UCHIDA, Syunketsu TOU, Takeo KATO, Hidekazu NISHIMURA, Masako TORIYA

[Domestic presentation] Design Symposium 2023 (Architecture Hall (Architectural Institute of Japan)) ,

2023.10

Oral presentation (general), The Japan Society for Precision Engineering, Japan Society of Japan Design, Japan Society of Japan Mechanical Engineers, Japan Society of Japan Design Engineering, Japan Society of Japan Architecture, Japan Society for Artificial Intelligence

Cross-Modal Correspondence between Sound Pitch and Shape Controlled by Shape Feature Indices

Jumpei Hayashi ,Takeo Kato, Hideyoshi Yanagisawa

[International presentation] IEEE International Conference on SMC(Systems, Man, and Cybernetics) 2023 (Oahu, Hawaii) ,

2023.10

Oral presentation (general), IEEE (Institute of Electrical and Electronics Engineers)

Effect of Complexity of Structure and Behavior on Interest and Admiration (Potential of Motion Design Based on Emotion Mechanics)

Shimon HONDA, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Proposal of a Preference Set-Based Design Method for Qualitative Evaluation

Shotaro OYAMA, Takeo KATO

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Development of Rugby Headgear to Reduce Risk of Concussion by using M-method

Yusei MIYAMOTO, Rimpei KUNO, Masaki OMIYA, Takeo KATO

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Development of a head protection device to prevent judo specific head injuries using the M method

Rimpei KUNO, Masaki OMIYA, Takeo KATO, Takeshi KAMITANI, Fumiyuki MATSUNO

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Sensory evaluation and brain activity measurement of visual and non-visual effects of light exposure

Haruki MORIOKA, Takeo KATO

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Trials on the quantification of aesthetic preferences using image features of videos

Ren HAYAKAWA, Yuki SHIMIZU, Takeo KATO, Yasuji FUKASAWA, Aichi INOUE

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Proposal of physical indexes based on perception mechanism of softness in soft matter using Tetra PEG gel

Aika YUKIMOTO, Tomoki SHIIYA, Takeo KATO, Takuya KATASHIMA, Yuka ODA, Makoto ASAI

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Proposal of Aesthetic Features for Shape Using Free Energy Toward the Development of General Features to Formulate Beauty of Shape

Hidefumi MATSUNAGA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 33rd Design Engineering & Systems Division Lecture (Kanazawa Chamber of Commerce and Industry Hall) ,

2023.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Prediction Equations for Lower Leg Swelling in driving posture

Fuka Kajitani, Takeo Kato, Akinari Hirao

[International presentation] The 4th International Comfort Congress 2023 (Amberg, Germany) ,

2023.09

Oral presentation (general), Comfort Congress

Development of sitting behaviour modification system using an infrared depth camera

Hayato Uchida, Fuka Kajitani, Takeo Kato, Hidekazu Nishimura, Akinari Hirao

[International presentation] The 4th International Comfort Congress 2023 (Amberg, Germany) ,

2023.09

Oral presentation (general), Comfort Congress

Analysis of musculoskeletal loads during prolonged sitting in the desk work

Akinari Hirao, Hayato Uchida, Takeo Kato

[International presentation] DHM 2023 (8th International Digital Human Modeling Symposium) (Antwerp, Belgium) ,

2023.09

Oral presentation (general), the Technical Committee of Digital Human Modelling and Simulation at International Ergonomics Association (IEA)

Modeling motion and structure for aesthetic inerest

Shimon HONDA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 70th Spring Meeting (Shibaura Institute of technology, Toyosu campus) ,

2023.06

Oral presentation (general), Japanese Society for the Science of Design

Posture correction system using an infrared depth camera

Hayato UCHIDA, Fuka KAJITANI, Takeo KATO, Hidekazu NISHIMURA, Akinari HIRAO

[Domestic presentation] The 70th Spring Meeting (Shibaura Institute of technology, Toyosu campus) ,

2023.06

Oral presentation (general), Japanese Society for the Science of Design

Cross-modal Correspondence between Sound and Shape Controlled by Shape Feature Index

Jumpei HAYASHI, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 70th Spring Meeting (Shibaura Institute of technology, Toyosu campus) ,

2023.06

Oral presentation (general), Japanese Society for the Science of Design

Analysis of crossmodal correspondences between taste and vision on shape "complexity"

Aika YUKIMOTO, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 70th Spring Meeting (Shibaura Institute of technology, Toyosu campus) ,

2023.06

Oral presentation (general), Japanese Society for the Science of Design

Proposal of Arousal Potential Model for Shapes - Shape Features Using Free Energy -

Hidefumi MATSUNAGA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 70th Spring Meeting (Shibaura Institute of technology, Toyosu campus) ,

2023.06

Oral presentation (general), Japanese Society for the Science of Design

Analysis of the Relationship Between Thigh Pressure and Lower Leg Swelling in the Driving Posture

Fuka KAJITANI, Takeo KATO, Akinari HIRAO

[Domestic presentation] 2023Y Spring Research Presentation Lecture (Keio University, Hiyoshi Campus, Raiosha ) ,

2023.05

Oral presentation (general), Japan Society for Design Engineering

Tire Groove Image Generation Method Using 2D Discrete Fourier Transform and StyleGAN

Ren HAYAKAWA, Ryogo NOJI, Takeo KATO

[Domestic presentation] 2023Y Spring Research Presentation Lecture (Keio University, Hiyoshi Campus, Raiosha ) ,

2023.05

Oral presentation (general), Japan Society for Design Engineering

Preference Set-based Design Method Using Dominance-based Rough Sets Approach

Shotaro OYAMA, Takeo KATO

[Domestic presentation] 2023Y Spring Research Presentation Lecture (Keio University, Hiyoshi Campus, Raiosha ) ,

2023.05

Oral presentation (general), Japan Society for Design Engineering

Formulation of Novelty and Complexity in Shape and its Application to Design (Implementation of shape generation systems capable of manipulating novelty and complexity)

Shimon HONDA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 32nd Design Engineering & Systems Division Lecture (Okayama Prefectural University) ,

2022.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Systematic Classification of 3D Shape Analysis Methods using Curvature and their Apprications

Takahiro SHIMIZU, Kazuma MATSUYAMA, Takeo KATO

[Domestic presentation] The 32nd Design Engineering & Systems Division Lecture (Okayama Prefectural University) ,

2022.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Cross-modal Effect between Taste and Shape Controlled by Curvature Entropy

Jumpei HAYASHI, Hiromasa SASAKI, Takeo KATO

[Domestic presentation] The 32nd Design Engineering & Systems Division Lecture (Okayama Prefectural University) ,

2022.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Design Keyword Generation System Using AutoExtend

Ryogo NOJI, Takeo KATO

[Domestic presentation] The 32nd Design Engineering & Systems Division Lecture (Okayama Prefectural University) ,

2022.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Novelty index for Curved Surface using KL Divergence and its Effectiveness on Industrial Product

Hiromasa Sasaki, Takeo Kato, Hideyoshi Yanagisawaa

[International presentation] KEER (Kansei Engineering and Emotion Research) 2022 (Barcelona, Spain) ,

2022.09

Oral presentation (general), the Kansei Engineering and Emotion Research

Cross-modal Effect between Taste and Shape controlled by Curvature Entropy

Jumpei Hayashi ,Hiromasa Sasaki, Takeo Kato

[International presentation] KEER (Kansei Engineering and Emotion Research) 2022 (Barcelona, Spain) ,

2022.09

Oral presentation (general), the Kansei Engineering and Emotion Research

Systematic Classification of 3D Shape Analysis Methods using Curvature and Quantiıcation of "Complexity"

Kazuma Matsuyama, Takahiro Shimizu, Takeo Kato

[International presentation] The 19th International Conference on Machine Design and Production (UMTIK 2022) (Cappadocia, Türkiye) ,

2022.08

2022.09

Oral presentation (general), UMTIK Organizing Committee

Keyword Generation System based on Design thinking Model

Takeo Kato, Ryogo Noji, Kiyotaka Takaira

[International presentation] The 19th International Conference on Machine Design and Production (UMTIK 2022) (Cappadocia, Türkiye) ,

2022.08

2022.09

Oral presentation (general), UMTIK Organizing Committee

Design Guidelines and Case Study: Enhance Trust between Peer-to-Peer in the Sharing Economy

Shengping Han, Hiroaki Kitagawa, Takeo Kato, Masaru Matsumoto

[Domestic presentation] The 69th Spring Meeting (Online via Zoom and oVice) ,

2022.06

Oral presentation (general), Japanese Society for the Science of Design

Duality in Emergent Design and Optimum Design - Toward the construction of Design Dualism -

Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 69th Spring Meeting (Online via Zoom and oVice) ,

2022.06

Oral presentation (general), Japanese Society for the Science of Design

Formulation of Novelty and Complexity in Shape and its Application to Inverse Problems

Shimon HONDA, Hideyoshi YANAGISAWA, Takeo KATO

[Domestic presentation] The 69th Spring Meeting (Online via Zoom and oVice) ,

2022.06

Oral presentation (general), Japanese Society for the Science of Design

Multispace Design Model and Its Application

Takeo KATO

[Domestic presentation] The 69th Spring Meeting (Online via Zoom and oVice) ,

2022.06

Oral presentation (general), Japanese Society for the Science of Design

Psychophysiological Study of Visual and Non-visual Effects of Light Exposure

Haruki MORIOKA, Keisuke OHYA, Takeo KATO

[Domestic presentation] 2022Y Spring Research Presentation Lecture (Online via Zoom (Waseda University)) ,

2022.05

Oral presentation (general), Japan Society for Design Engineering

Quantification of “Complexity” Based on Systematic Classification of 3D Shape Analysis Methods Using Curvature

Takahiro SHIMIZU, Kazuma MATSUYAMA, Masaya OKAMOTO, Takeo KATO

[Domestic presentation] 2022Y Spring Research Presentation Lecture (Online via Zoom (Waseda University)) ,

2022.05

Oral presentation (general), Japan Society for Design Engineering

Keyword Generation Support System Using Thesaurus Dictionary and Distributed Representation

Ryogo NOJI, Kiyotaka TAKAIRA, Takeo KATO

[Domestic presentation] 2022Y Spring Research Presentation Lecture (Online via Zoom (Waseda University)) ,

2022.05

Oral presentation (general), Japan Society for Design Engineering

Aesthetic evaluation of diamond optical simulation video by frequency analysis using L*a*b* color system

Yuki SHIMIZU, Takeo KATO, Yasuji FUKASAWA, Aichi INOUE

[Domestic presentation] The 17th Spring Meeting of the Japan Society of Kansei Engineering (Online via Zoom (Iwate Prefectural University)) ,

2022.03

Poster presentation, Japan Society of Kansei Engineering

Study of Cross-modal Correspondence of Taste Induced by Perception of Vibration and Rheological Property

Tomoki SHIIYA,Takeo KATO, Takuya KATASHIMA, Haruka ODA

[Domestic presentation] The 17th Spring Meeting of the Japan Society of Kansei Engineering (Online via Zoom (Iwate Prefectural University)) ,

2022.03

Poster presentation, Japan Society of Kansei Engineering

Influence on Alertness by Non-visual Effect of Short-wavelength Components of Polychromatic Light

Keisuke OHYA, Shu ANDO, Haruki MORIOKA, Takeo KATO

[Domestic presentation] 2021Y Autumn Research Presentation Lecture (Online via Zoom (University of Fukui)) ,

2021.10

Oral presentation (general), Japan Society for Design Engineering

Development of The Various Texture Derivation System Based on Using GAN

Masaki SHIMOMURA, Gento OBA, Naoto KOKADO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2021Y Autumn Research Presentation Lecture (Online via Zoom (University of Fukui)) ,

2021.10

Oral presentation (general), Japan Society for Design Engineering

Construction for Design Integrating Data-Driven and Model Driven

Naoto KOKADO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2021Y Autumn Research Presentation Lecture (Online via Zoom (University of Fukui)) ,

2021.10

Oral presentation (general), Japan Society for Design Engineering

Research on the Design of Trust in the Sharing Economy

Hiroaki KITAGAWA, Shengping HAN, Takeo KATO

[Domestic presentation] The 31st Design Engineering & Systems Division Lecture,

2021.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Evaluation Index of Novelty of Curved Surface Shapes using KL Divergence and its Influence on Aesthetic Preference

Hiromasa SASAKI, Akihiro OKANO, Takeo KATO, Hideyoshi YANAGISAWA

[Domestic presentation] The 31st Design Engineering & Systems Division Lecture (Online/Virtual Venue) ,

2021.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Aesthetic Preference in Closed Planar Curves by Introducing EVE' Theory

Takemasa Ito, Akihiro Okano, Takeo Kato

[International presentation] International Conference on Design and Concurrent Engineering 2021 & Manufacturing Systems Conference 2021 (iDECON/MS2021),

2021.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Panel Discussion: Kansei Modeling -Thinking about Meta-models of Kansei -

Hideyoshi YANAGISAWA, Kazutaka UEDA, Takeo KATO, Keiichi MURAMATSU, Kazuya OIZUMI

[Domestic presentation] The 23rd Annual Meeting of Japan Society of Kansei Engineering (Online via Zoom) ,

2021.09

Oral presentation (general), Japan Society of Kansei Engineering

Trial of aesthetic preference quantification of 3D shape

Kazuma MATSUYAMA, Masaya OKAMOTO, Takeo KATO

[Domestic presentation] Design Symposium 2021 (Online via Zoom) ,

2021.07

Dynamic Visual Evaluation Structure in Wood Grain Interior Material Texture

Tomoki SHIIYA, Shotaro KISHITA, Takeo KATO, Kei MATSHUOKA, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2021 (Online via Zoom) ,

2021.07

Plastic and High-grade about Leather Textures

Shotaro KISHITA, Junya TANAKA, Kei MATSUOKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2021 (Online via Zoom) ,

2021.07

Method to Estimate Aesthetic Preference in Closed Planar Curves

Takemasa ITO, Akihiro OKANO, Takeo KATO

[Domestic presentation] Design Symposium 2021 (Online via Zoom) ,

2021.07

Elucidation of the Differences in the Line-of-Sight Transition Tendency when Drawing

Mai MASUBUCHI, Takeo KATO, Yusuke ASHIZAWA

[Domestic presentation] The 68th Spring Meeting (Online via Zoom (Nagaoka Institute of Design)) ,

2021.06

Oral presentation (general), Japan Society for Design Engineering

Relationship Analysis between Visual Evaluation and Physical Properties in Leather Textures

Shotaro KISHITA, Junya TANAKA, Kei MATSUOKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2021Y Spring Research Presentation Lecture (Online via Zoom (Meisei University)) ,

2021.05

Oral presentation (general), Japan Society for Design Engineering

Graphical Modeling Method of Value Perception

Ikuya AOKI, Takeo KATO

[Domestic presentation] 2021Y Spring Research Presentation Lecture (Online via Zoom (Meisei University)) ,

2021.05

Oral presentation (general), Japan Society for Design Engineering

Analysis of the Relationship between Dynamic Visual Evaluation and Physical Property about Wood Grain Texture

Shotaro KISHITA, Tomoki SHIIYA, Kei MATSUOKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2021Y Spring Research Presentation Lecture (Online via Zoom (Meisei University)) ,

2021.05

Oral presentation (general), Japan Society for Design Engineering

Trial of aesthetic preference evaluation of 3D shape Using 3D VAE

Masaya OKAMOTO, Kazuma MATSUYAMA, Takeo KATO

[Domestic presentation] Kanto Section 27th General Meeting and Lecture (Online via Zoom) ,

2021.03

Oral presentation (general), The Japan Society of Mechanical Engineers

Modeling for Aesthetic liking of Curved Surface Shapes using KL Divergence

Akihiro OKANO, Takeo KATO

[Domestic presentation] Kanto Section 27th General Meeting and Lecture (Online via Zoom) ,

2021.03

Oral presentation (general), The Japan Society of Mechanical Engineers

Design Keyword Generation Method based on Similarities of Co-occurrence Word

Takeo KATO, Mitsuhiro WADA

[Domestic presentation] The 30th Design Engineering & Systems Division Lecture (Online via Zoom (Doshisya University)) ,

2020.11

Oral presentation (general), The Japan Society of Mechanical Engineers

Quantification of “Complexity” in Curved Surface Shape Using Gaussian Curvature Entropy

Akihiro Okano, Taishi Matumoto, Takeo Kato

[International presentation] The 5th International Conference on Design Engineering and Science, ICDES2020 ((Online Kitakyushu)) ,

2020.11

Oral presentation (general), the Japan Society for Design Engineering

Shape Generation System Based on Three-dimensional Classification Method

Masaya Okamoto, Takeo Kato

[International presentation] The 5th International Conference on Design Engineering and Science, ICDES2020 ((Online Kitakyusyu)) ,

2020.11

Oral presentation (general), Japan Society for Design Engineering

Modeling for Aesthetic liking of Curved Surface Shapes

Akihiro OKANO, Takeo KATO

[Domestic presentation] 2020Y Autumn Research Presentation Lecture (Online via Zoom (Tokyo Institute of Technology)) ,

2020.10

Oral presentation (general), Japan Society for Design Engineering

Discourses of Modeling for Aesthetic Liking

Takeo KATO

[Domestic presentation] 2020Y Autumn Research Presentation Lecture (Online via Zoom (Tokyo Institute of Technology)) ,

2020.10

Oral presentation (general), Japan Society for Design Engineering

Modeling for Aesthetic liking of Closed planer Curves

Takeo KATO, Akihiro OKANO, Takemasa ITO

[Domestic presentation] The 22nd Annual Meeting of the Japan Society of Kansei Engineering (Online via Cisco Webex Meeting) ,

2020.09

Oral presentation (general), Japan Society of Kansei Engineering

Design Keyword Generation Method Based on Word2vec and Multispace Design Model

Takeo Kato, Mitsunori Wada, Yasuhide Kishitani

[International presentation] The 8th International Conference on KEER(Kansei Engineering and Emotion Research) 2020 (Chuo University, Korakuen Campus) ,

2020.09

Oral presentation (general), Japan Society of Kansei Engineering

Quantification of “Order” in 2D Closed Curved Shapes

Takeo Kato, Yoshiyuki Matsuoka

[International presentation] The 14th International Conference on Design Principles & Practices (Pratt Institute, Brooklyn Campus, New York) ,

2020.03

Poster presentation

Idea Generation Using Sketch and Its Brain Activity

Takeo KATO, Hirotaka NAKATANI

[Domestic presentation] The 15th Spring Conference of Japan Society of Kansei Engineering ((Cancelled: Fukuoka Institute of Technology)) ,

2020.03

Oral presentation (general), Japan Society of Kansei Engineering

Seat Design application of Timeaxis Design Method using Multi-purpose Optimization

Akinari HIRAO, Takeo KATO, Yoshiyuki MATSUOKA, Donghyoun KIM, Akihiro HAYASHI, Yoshitaka SASAKI

[Domestic presentation] Design Symposium 2019 (Keio University, Hiyoshi Campus) ,

2019.11

Oral presentation (general), Japan Design Society, Japan Society of Japan Mechanical Engineers, Japan Society of Japan Design Engineering, Japan Society of Japan Architecture, Japan Society for Precision Engineering, Japanese Society for Artificial Intelligence

Curved Surface Shape Generation Method Based on Gaussian Curvature Entropy

Akihiro OKANO, Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] Design Symposium 2019 (Keio University, Hiyoshi Campus) ,

2019.11

Mathematical Model Systematization for Timeaxis Design

Kensuke MAEZAWA, Shinichi TANAKA, Akinari HIRAO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2019 (Keio University, Hiyoshi Campus) ,

2019.11

Timeaxis Design Method for Multi-time Scale Problem

Akinari HIRAO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2019 (Keio University, Hiyoshi Campus) ,

2019.11

Curved Surface Shape Generation Method Based on “Complexity” Index

Akihiro Okano, Taishi Matumoto, Takeo Kato

[International presentation] IEEE International Conference on SMC(Systems, Man, and Cybernetics) 2019 (Bari, Italy) ,

2019.10

Oral presentation (general), IEEE

Proposition of Quantifying Index of “Order” in 2D shapes

Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] The 29th Design Engineering & Systems Division Lecture (Tohoku University, Katahira Campus) ,

2019.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Digitization of M method

Daisuke ISEKI, Hayata TANAKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 29th Design Engineering & Systems Division Lecture (Tohoku University, Katahira Campus) ,

2019.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Guidelines on Selection of Design Methods Based on AGE Thinking

Yuma SAKAE, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 29th Design Engineering & Systems Division Lecture (Tohoku University, Katahira Campus) ,

2019.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Timeaxis Design of a Value Growth Mobility Corresponding to Various Driving States and Multiple Users

Satoru FURUGORI, Takamasa SUETOMI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 29th Design Engineering & Systems Division Lecture (Tohoku University, Katahira Campus) ,

2019.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Curved Surface Shape Generation Method Based on “Complexity” Index

Akihiro Okano, Taishi Matumoto, Takeo Kato

[International presentation] JSME iDECON (International Conference on Design and Concurrent Engineering) 2019 (Sendai, Japan) ,

2019.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Measuring Order of 3D Shapes Using Outlines' Curvature

Damien KITTEN, Risa INABA, Takeo KATO

[Domestic presentation] 2019Y Autumn Research Presentation Lecture (Osaka Electro-Communication University, Neyagawa Campus) ,

2019.09

Oral presentation (general), Japan Society for Design Engineering

Proposal of Emergent Shape Generation System with Threedimensional Shape Classification Method

Masaya OKAMOTO, Takeo KATO

[Domestic presentation] The 21st Annual Meeting of the Japan Society of Kansei Engineering (Shibaura Institute of technology, Toyosu campus) ,

2019.09

Oral presentation (general), Japan Society of Kansei Engineering

Design and Modeling

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 21st Annual Meeting of the Japan Society of Kansei Engineering (Shibaura Institute of technology, Toyosu campus) ,

2019.09

Oral presentation (general), Japan Society of Kansei Engineering

Brain Activities of Idea Generation Types Using Sketch

Takeo Kato, Jio Koike, Yusuke Ashizawa

[International presentation] IASDR (International Association of Societies of Design Research Conference) 2019 (Manchester, UK) ,

2019.09

Oral presentation (general), International Association of Societies of Design Research

Utilization of AI Technology in Design Thinking Model

Msaki SIMOMURA, Gento OBA, Mayuka SUDA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 66th Spring Meeting (Nagoya City University, Sakurayama Campus) ,

2019.06

Oral presentation (general), Japan Society for Design Engineering

Analysis of the Relationship between Idea Generation using Sketch and Brain Activity

Takeo KATO, Jio KOIKE, Yusuke ASHIZAWA

[Domestic presentation] The 66th Spring Meeting (Nagoya City University, Sakurayama Campus) ,

2019.06

Oral presentation (general), Japanese Society for the Science of Design

Timeaxis Design for Multi-Time Scale Problem using Multi-Objective Optimization - A case study for seat design -

Akinari HIRAO, Tomoyuki KOSABA, Kensuke MAEZAWA, Shinichi TANAKA, Takeo KATO, Yoshiyuki MATSUOKA, Donghyoun KIM, Akio HAYASHI, Yoshitaka SASAKI

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Analyzing Characteristics of Research in Engineering Design and Industrial Design Based on Multispace Design Model Toward Design Integration

Yuma SAKAE, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Development of an Idea Support System Using AI At the Early Stage of Product Design

Masaki SHIMOMURA, Gento OBA, Mayuka SUDA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Construction Method of Value Causal Structure Model using Bayesian Network

Ikuya AOKI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Timeaxis Design of the Automotive Control System using Identity Mapping Neural Networks and State Transition Model

Satoru FURUGORI, Takamasa SUETOMI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Timeaxis Design for Multi-time-scale Problems

Takeo KATO, Tomoyuki KOSABA, Kensuke MAESAWA, Shinichi TANAKA, Akinari HIRAO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2019.05

Oral presentation (general), Japan Society for Design Engineering

Timeaxis Design for Multi-time Scale Problem using Multi-objective Optimization

Akinari HIRAO, Tomoyuki KOSABA, Kensuke MAEZAWA, Shinichi TANAKA, Takeo KATO, Yoshiyuki MATSUOKA, Donghyoun KIM, Akio HAYASHI, Yoshitaka SASAKI

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Pacifico Yokohama) ,

2019.05

Oral presentation (general), Society of Automotive Engineers of Japan, Inc.

Timeaxis Design for Multi-time-scale Problem

Takeo KATO, Tomoyuki KOSABA, Kensuke MAESAWA, Shinichi TANAKA, Akinari HIAO, Yoshiyuki MATSUOKA

[Domestic presentation] 2019Y Spring Research Presentation Lecture (Pacifico Yokohama) ,

2019.05

Oral presentation (general), Society of Automotive Engineers of Japan, Inc.

Proposal of Shape Generation System Using “Complexity” Index

Taishi Matsumoto, Takeo Kato

[Domestic presentation] The 14th Annual Meeting of the Japan Society of Kansei Engineering (Shinshu University, Faculty of Textile Science and Technology) ,

2019.03

Oral presentation (general), Japan Society of Kansei Engineering

Curved Surface Generation Method Using "Complexity" Index

Akihiro OKANO, Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] The 14th Spring Meeting of the Japan Society of Kansei Engineering (Shinshu University, Faculty of Textile Science and Technology) ,

2019.03

Oral presentation (general), Japan Society of Kansei Engineering

Quantification of Order in 2D Shapes

Takeo Kato

[International presentation] The 13th International Conference on Design Principles & Practices (Saint Petersburg, Russia) ,

2019.03

Poster presentation, DRS (Design Research Society）

Timeaxis Design of Driving State Learning System Using Non-Steady Model

Satoru Furugori, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] 2018 Joint 10th International Conference on Soft Computing and Intelligent Systems and 19th International Symposium on Advanced Intelligent Systems (Toyama, Japan) ,

2018.12

Oral presentation (general), IEEE (Institute of Electrical and Electronics Engineers)

Graphical Modeling Method of Value Perception for Value Growth Design

Takeo KATO, Kazuaki UESHIMA, Yoshiyuki MATSUOKA

[Domestic presentation] The 28th Design Engineering & Systems Division Lecture (Yomitan Village, Okinawa) ,

2018.11

Oral presentation (general), The Japan Society of Mechanical Engineers

System for Deriving Diverse Solutions Using “Complexity” Index

Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] The 28th Design Engineering & Systems Division Lecture (Yomitan Village, Okinawa) ,

2018.11

Oral presentation (general), The Japan Society of Mechanical Engineers

Characteristics of Research for Engineering Design and Design within Multispace Design Model (The Case of Journal of Engineering Design and Design Studies)

Yuma SAKAE, Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 28th Design Engineering & Systems Division Lecture (Yomitan Village, Okinawa) ,

2018.11

Oral presentation (general), The Japan Society of Mechanical Engineers

Quantifying Sense of Depth Towards Visual Texture Using Optics Simulation

Masaki Shimomura, Ruriko Kamesaka, Mugi Nishihara, Kei Matsuoka,Takamasa Yoshimura, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] IHSED 2018: Human Systems Engineering and Design (Reims, France) ,

2018.10

Oral presentation (general), DBLP computer science bibliography

Proposition of M Method System

Daisuke ISEKI, Shota AMABE, Kunpei YAMANO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 65th Spring Meeting (Osaka Institute of Technology, Umeda Campus) ,

2018.06

Oral presentation (general), Japanese Society for the Science of Design

Method for Deriving Product Development Process based on Timeaxis Design

Takeo KATO, Yuki YASUMOTO, Masafumi KIKUCHI, Atsuo MATSUMOTO, Yoshiyuki MATSUOKA

[Domestic presentation] The 65th Spring Meeting (Osaka Institute of Technology, Umeda Campus) ,

2018.06

Oral presentation (general), Japanese Society for the Science of Design

Quantification of "Complexity" on Curved Surface Shapes

Taishi MATSUMOTO, Yuta KITSUTAKA, Takeo KATO, Hiroki SATO

[Domestic presentation] The 65th Spring Meeting (Osaka Institute of Technology, Umeda Campus) ,

2018.06

Oral presentation (general), Japanese Society for the Science of Design

Relationship between the colors of the light and the brain activity measured by NIRS

Tianyu LI, Takeo KATO, Masaki SHIMOMURA, Takamasa YOSHIMURA

[Domestic presentation] The 65th Spring Meeting (Osaka Institute of Technology, Umeda Campus) ,

2018.06

Oral presentation (general), Japanese Society for the Science of Design

Timeaxis Design of the Automotive Control System using Identity Mapping Neural Networks and State Transition Model

Satoru FURUGORI, Takamasa SUETOMI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2018Y Spring Research Presentation Lecture (The University of Tokyo, Hongo Campus) ,

2018.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of Design Parameter Selection Method Using Multi-space Quality Function Deployment

Mitsuhiro WADA, Kazuaki UESHIMA, Takeo KATO

[Domestic presentation] 2018Y Spring Research Presentation Lecture (The University of Tokyo, Hongo Campus) ,

2018.05

Oral presentation (general), Japan Society for Design Engineering

Construction of Knowledge System for seating Comfort based on Multispace Design Model: Biomechanical Determination Factors of Sitting Posture

Akinari HIRAO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2018Y Spring Research Presentation Lecture (The University of Tokyo, Hongo Campus) ,

2018.05

Oral presentation (general), Japan Society for Design Engineering

Feature Analysis of Research for Engineering Design and Design within Multispace Design Model

Yuma SAKAE, Shota MUKAI, Kichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2018Y Spring Research Presentation Lecture (The University of Tokyo, Hongo Campus) ,

2018.05

Oral presentation (general), Japan Society for Design Engineering

Proposition of M method System

Daisuke ISEKI, Shota AMABE, Kunpei YAMANO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2018Y Spring Research Presentation Lecture (The University of Tokyo, Hongo Campus) ,

2018.05

Oral presentation (general), Japan Society for Design Engineering

Measurment of Brain Activities of Idea Generation (Sketch)

Takeo Kato, Hikaru Okada, Yuichi Izu

[International presentation] DESIGN 2018 - The 15th International Design Conference (Hotel Dubrovnik Palace, Dubrovnik, Croatia) ,

2018.05

Oral presentation (general), The Design Society

Quantification of Complexity on Curved Surface Shape Using Gaussian Curvature Entropy

Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] The 13th Spring Meeting of the Japan Society of Kansei Engineering (School of Engineering, Nagoya University) ,

2018.03

Oral presentation (general), Japan Society of Kansei Engineering

Proposal of Selection Guidelines for Design Methods Based on Input-output chart

Yuki OKAMOTO, Keita KIMURA, Tianyu LI, Takeo KATO, Shuji TAKANO

[Domestic presentation] 2017Y Spring Research Presentation Lecture (National Institute of Technology, Niihama College) ,

2017.10

Oral presentation (general), Japan Society for Design Engineering

Set-based Design Method Using Vector Evaluated Particle Swarm Optimization

Tatsuki Itomi, Mitsuhiro Wada, Tetsuya Ishinari, Takeo Kato

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

Quantitative Representation Method of Complexity on Three Dimensional Shape

Taishi Matsumoto, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

Proposition of M Method System

Daisuke Iseki, Yuki Yasumoto, Shota Amabe, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

Brain Activities of Idea Generation Using Sketches

Takeo Kato, Hikaru Okada, Yuichi Izu

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

Stakeholder Value Prioritization Method for Quality Function Deployment

Kazuaki Ueshima, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

A Conceptual Design for a Value Growth Mobility System Based on Timeaxis Design

Satoru Furugori, Keisuke Toda, Soichiro Hatano, Takeo Kato, Hidekazu Nishimura, Yoshiyuki Matsuoka

[International presentation] ICDES 2017 The 4th International Conference on Design Engineering and Science (Aachen, Germany) ,

2017.09

Oral presentation (general), Japan Society for Design Engineering

Proposition of M-Method System based on Multispace Design Model

Daisuke ISEKI, Yuki YASUMOTO, Shota AMABE, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 64th Spring Meeting (Takushoku University, Bunkyo Campus) ,

2017.06

2017.07

Oral presentation (general), Japanese Society for the Science of Design

Comparative Analysis on Research Objects of Design and Engineering Design

Shota MUKAI, Yuma SAKAE, Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 64th Spring Meeting (Takushoku University, Bunkyo Campus) ,

2017.06

2017.07

Oral presentation (general), Japanese Society for the Science of Design

A Study on the Drawing Process of Still Life Drawing and Sketching in Design Education

Yuichi IZU, Takeo KATO, Koichiro SATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 64th Spring Meeting (Takushoku University, Bunkyo Campus) ,

2017.06

2017.07

Oral presentation (general), Japanese Society for the Science of Design

Index of "Complexity" in Curved Surface

Taishi MATSUMOTO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 64th Spring Meeting (Takushoku University, Bunkyo Campus) ,

2017.06

2017.07

Oral presentation (general), Japanese Society for the Science of Design

Systematization of seating Comfort Research Knowledge・Verification by applying to Automobile Passenger Seats

Akinari HIRAO, Mikako ARITA, YoonHae KIM, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 64th Spring Meeting (Takushoku University, Bunkyo Campus) ,

2017.06

2017.07

Oral presentation (general), Japanese Society for the Science of Design

Proposal of Preference Set-Based Design Method using VEPSO and Branch and Bound Method

Mitsuhiro WADA, Tatsuki ITOMI, Takeo KATO

[Domestic presentation] 2022Y Spring Research Presentation Lecture (Chiba Institute of Technology, Tsudanuma Campus) ,

2017.05

Oral presentation (general), Japan Society for Design Engineering

Quantification of "Complexity" in Curved Surface using Gaussian Curvature Integration

Taishi MATSUMOTO, Takeo KATO

[Domestic presentation] 2017Y Spring Research Presentation Lecture (Chiba Institute of Technology, Tsudanuma Campus) ,

2017.05

Oral presentation (general), Japan Society for Design Engineering

Proposed Algorithm of Optimizing Design Variable Range for Set-based Design

Tatsuki ITOMI, Takeo KATO

[Domestic presentation] Design Symposium 2016 (Osaka University, Alumnus Union Building) ,

2016.12

Oral presentation (general), The Japan Society of Japan Mechanical Engineers, Japan Society for Precision Engineering, Japan Society for Japan Design Engineering, Japan Architectural Institute of Japan, Japan Design Society of Japan, Japanese Society for Artificial Intelligence

A Method to Analyze Stakeholder’s Value in Quality Function Deployment

Kazuaki UESHIMA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2016 (Osaka University, Alumnus Union Building) ,

2016.12

Oral presentation (general), The Japan Society of Japan Mechanical Engineers,Japan Society for Precision Engineering,Japan Society for Japan Design Engineering,Japan Architectural Institute of Japan,Japan Design Society of Japan,Japanese Society for Artificial Intelligence

Comparison of Hand and Computer Form Generation Using Near-infrared Spectroscopy

Takeo KATO, Shogo OTAGIRI, Yusuke NAGAMORI, Yuichi IZU

[Domestic presentation] The 26th Design Engineering & Systems Division Lecture (Keio University, Hiyoshi Campus) ,

2016.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Classification of Design Methods Based on Systems Engineering and its Application

Yuki OKAMOTO, Keita KIMURA, Takeo KATO, Syuji TAKANO, Hidekazu NISHIMURA

[Domestic presentation] The 26th Design Engineering & Systems Division Lecture (Keio University, Hiyoshi Campus) ,

2016.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Time Axis Design of the Value Growth Mobility System with the Value Occurrence-Growth Model

Kazuaki UESHIMA, Keisuke TODA, Takeo KATO, Satoru FURUGORI, Hidekazu NISHIMURA, Yoshiyuki MATSUOKA

[Domestic presentation] The 26th Design Engineering & Systems Division Lecture (Keio University, Hiyoshi Campus) ,

2016.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Reducing Feasible Region and Narrowing Range of Design Variables in Preference Set-based Design Method

Tatsuki ITOMI, Takeo KATO

[Domestic presentation] The 26th Design Engineering & Systems Division Lecture (Keio University, Hiyoshi Campus) ,

2016.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Clustering method of Design Structure Matrix based on Trade-off Relationships between Product Components

Kengo Yoshinaga, Takeo Kato, Yoshihiro Kai

[International presentation] MJJIC 2016 Malaysia-Japan Joint International Conference 2016 (SERI PACIFIC HOTEL, Kuala Lumpur) ,

2016.09

Oral presentation (general), Malaysia-Japan Joint International Conference

Comparison of Drawing Skills between Still Life Drawing and Design Sketching

Yuichi Izu, Koichiro Sato, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] KEER 2016 6th International Kansei Engineering and Emotion Research Conference (University of Leeds, United Kingdom) ,

2016.08

2016.09

Oral presentation (general), the Japan Society of Kansei Engineering

Comparison of Hand and Computer Drawings Using Near-infrared Spectroscopy

Takeo Kato, Shogo Otagiri, Yusuke Nagamori, Yuichi Izu

[International presentation] KEER 2016 6th International Kansei Engineering and Emotion Research Conference (University of Leeds, United Kingdom) ,

2016.08

2016.09

Oral presentation (general), Japan Society of Kansei Engineering

Relation of Still Life Drawing Skills and Design Sketching Skills in Design Education

Yuuichi IZU, Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 63rd Annual Meeting (Nagano University) ,

2016.07

Oral presentation (general), Japanese Society for the Science of Design

Proposed Method for Narrowing Range of Design Variables in Preference Set·based Design

Tatsuki ITOMI, Takeo KATO

[Domestic presentation] 2016Y Spring Research Presentation Lecture (Tokyo Institute of Technology, Ookayama Campus, West Bldg. 9, Tokyo Tech Front) ,

2016.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of Design Methodology Based on Systems Engineering

Yuki OKAMOTO, Keita KIMURA, Takeo KATO, Syuji TAKANO, Hidekazu NISHIMURA

[Domestic presentation] 2016Y Spring Research Presentation Lecture (Tokyo Institute of Technology, Ookayama Campus, West Bldg. 9, Tokyo Tech Front) ,

2016.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of Value Occurrence and Growth Model in Design with Application to Value Growth Mobility System

Kazuaki UESHIMA, Keisuke TODA, Takeo KATO, Satoru FURUGORI, Hidekazu NISHIMURA, Yoshiyuki MATSUOKA

[Domestic presentation] 2016Y Spring Research Presentation Lecture (Tokyo Institute of Technology, Ookayama Campus, West Bldg. 9, Tokyo Tech Front) ,

2016.05

Oral presentation (general), Japan Society for Design Engineering

Classification of Design Methods from the Viewpoint of Design Science

Yuma Sakae, Takeo Kato, Koichiro Sato, Yoshiyuki Matsuoka

[International presentation] Design 2016： 14th International Design Conference (Cavtat, Dubrovnik, Croatia) ,

2016.05

Oral presentation (general), The Design Society

Proposal of Modularization Method using Quality Function Development and Design Structure Matrix

Kengo YOSHINAGA, Takeo KATO, Yoshihiro KAI

[Domestic presentation] 2015Y Autumn Research Presentation Lecture (Hokkaido University, Faculty of Engineering) ,

2015.10

Oral presentation (general), Japan Society for Design Engineering

Wheel Chair Design using Human Design Technology

Takeo KATO, Satoshi KATSUMATA, Takumi KOYAMA

[Domestic presentation] 2015Y Autumn Research Presentation Lecture (Hokkaido University, Faculty of Engineering ) ,

2015.10

Oral presentation (general), Japan Society for Design Engineering

Design Thinking Model in Design Science and its Application

Yuma SAKAE, Takeo KATO, Koichiro SATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 25th Design Engineering & Systems Division Lecture (Shinshu University, Faculty of Engineering) ,

2015.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Quality Function Deployment Based on M Model and Its Application

Takeo KATO, Kengo YOSHINAGA, Yoshiyuki MATSUOKA

[Domestic presentation] The 25th Design Engineering & Systems Division Lecture (Shinshu University, Faculty of Engineering) ,

2015.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Robust Design for Adjustable Control Factors based on Multispase Design Model

Ryo KOJIMA, Takeo KATO, Koichiro SATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 25th Design Engineering & Systems Division Lecture (Shinshu University, Faculty of Engineering) ,

2015.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Set-Based Design Method Using Vector Evaluated Particle Swarm Optimization

Masatoshi Muramatsu, Tetsuya Ishinari, Takeo Kato

[International presentation] iDECON 2015 International Design and Concurrent Engineering Conference 2015 (Tokushima, Japan) ,

2015.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Quality Function Deployment Using Multispace Design Model and Its Application

Takeo Kato, Shigehiro Horiuchi, Toshiharu Miwa, Yoshiyuki Matsuoka

[International presentation] ICED 2015 International Conference on Engineering Design 2015 (Milano, Italy) ,

2015.07

Oral presentation (general)

Classification of Design Methods based on Design Thinking

Yuma SAKAE, Takeo KATO, Koichiro SATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 62nd Annual Meeting (Chiba university, Nishi-Chiba Campus) ,

2015.06

Oral presentation (general), Japanese Society for the Science of Design

Effects Analysis of Backrest Forward Tilt Function of Body Pressure Distribution of Wheelchair Seat and Backrest

Takumi KOYAMA, Ryusuke KATSUMATA, Takeo KATO, Yoshihiro KAI

[Domestic presentation] 2015Y Spring Research Presentation Lecture (Niho university, College of Science and Technology (Funabashi Campus)) ,

2015.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of Modularization Method of De0sign Elements for Quality Function Deployment

Kengo YOSHINAGA, Takeo KATO, Yoshihiro KAI

[Domestic presentation] 2015Y Spring Research Presentation Lecture (Nihon university, College of Science and Technology (Funabashi Campus)) ,

2015.05

Oral presentation (general), Japan Society for Design Engineering

Classification of Multi-objective Optimization for Ergonomic Design

Masatoshi MURAMATSU, Takeo KATO

[Domestic presentation] 2015Y Spring Research Presentation Lecture (Nihon university, College of Science and Technology (Funabashi Campus)) ,

2015.05

Oral presentation (general), Japan Society for Design Engineering

Multi-Objective Ergonomic Design method for Engineering and Physiological characteristics

Masatoshi Muramatsu, Takeo Kato

[International presentation] MJIIS 2014 MJIIT – JUC Joint International Symposium (Malaysia) ,

2014.11

Oral presentation (general), University of Technology Malaysia

Design Methodology of Large-scale System using Multispace QFD

Toshiharu MIWA, Shigehiro HORIUCHI, Takeo KATO. Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2014 (Institute of Industrial Science, the University of Tokyo) ,

2014.11

Oral presentation (general), Japan Society of Japan Design Engineering,Japan Society of Japan Mechanical Engineers,Japan Society for Precision Engineering,Japan Institute of Architectural Engineers,Japan Society of Japan Design,Japanese Society for Artificial Intelligence

Modeling of Skill and Knowledge for Mechanical Design based on Literature Research of Mechanical Design Education

Takeo KATO, Masaru TAKEUCHI, Gentaro OTSUJI

[Domestic presentation] 2014Y Autumn Research Presentation Lecture (Yamagata University, Faculty of Engineering) ,

2014.10

Oral presentation (general), Japan Society for Design Engineering

Optimization of Cushion and Back Angles for Lower Limb Blood Flow

Saori Sone, Daisuke Sannan, Takeo Kato, Yoshiyuki Matsuoka, Hiromu Hashimoto

[International presentation] ICDES 2014 The 3rd International Conference on Design Engineering and Science (Pilsen, Czech Republic) ,

2014.08

2014.09

Oral presentation (general), Japan Society for Design Engineering

Modeling of Relationships between Abilities, Skills, and Knowledge for Mechanical Designers and Its Application to University Curriculum

Takeo Kato, Gentaro Otsuji, Masaru Takeuchi

[International presentation] ICDES 2014 The 3rd International Conference on Design Engineering and Science (Pilsen, Czech Republic) ,

2014.08

2014.09

Oral presentation (general), Japan Society for Design Engineering

Robust Multiple Optimization for Adjustable Mechanisms

Masatoshi Muramatsu, Keigo Yamamoto, Takeo Kato

[International presentation] ICDES 2014 The 3rd International Conference on Design Engineering and Science (Pilsen, Czech Republic) ,

2014.08

2014.09

Oral presentation (general), Japan Society for Design Engineering

Analysis of Rough Sketches and Idea Sketches Using Structural Model of Sketching Skills

Yuuichi IZU, Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 61st Annual Meeting (Fukui University of Technology) ,

2014.07

Oral presentation (general), Japanese Society for the Science of Design

Quality Function Deployment Using Improved Interpretive Structural Modeling

Takeo Kato, Yoshiyuki Matsuoka

[International presentation] HCI 2014 16th International Conference on Human-Computer Interaction (Crete, Greece) ,

2014.06

Oral presentation (general), HCI (Human-Computer Interaction) International Conferences

Multispace Quality Function Deployment Using Design Structure Matrix

Takeo Kato, Takashi Soga, Yoji Hoshino

[International presentation] UMTIK 2014 International Conference on Machine Design and Production (Izmir, Türkiye) ,

2014.06

Oral presentation (general), UMTIK Organizing Committee

Proposal of Quality Function Deployment based on Multispace Design Model

Kengo YOSHINAGA, Shigehiro HORIUCHI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2014Y Spring Research Presentation Lecture (Meiji University, Nakano campus) ,

2014.05

Oral presentation (general), Japan Society for Design Engineering

Optimization of Cusihon and Back Angles for Lower Limb Blood Flow and Its Verification Experiment

Saori SONE, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2014Y Spring Research Presentation Lecture (Meiji University, Nakano campus) ,

2014.05

Oral presentation (general), Japan Society for Design Engineering

Classification of Sitting Posture and Body Pressure Distribution and Sitting Comfort Evaluation of Office Chair

Takumi KOYAMA, Takanori INOUE, Motohisa TAKAYAMA, Takeo KATO

[Domestic presentation] 2014Y Spring Research Presentation Lecture (Meiji University, Nakano campus) ,

2014.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of multipurpose robust design method using VEPSO method

Masatoshi MURAMATSU, Keigo YAMAMOTO, Takeo KATO

[Domestic presentation] 2014Y Spring Research Presentation Lecture (Meiji University, Nakano campus) ,

2014.05

Oral presentation (general), Japan Society for Design Engineering

Proposal of quality function development using design structure matrix

Sohei NOGUCHI, Takashi SOGA, Youji HOSHINO, Takeo KATO

[Domestic presentation] 2014Y Spring Research Presentation Lecture (Meiji University, Nakano campus) ,

2014.05

Oral presentation (general), Japan Society for Design Engineering

Derivation of Optimal Values in Cushion and Back Angles for Lower Limb Blood Flow

Saori Sone, Daisuke Sannan, Takeo Kato, Yoshiyuki Matsuoka, Hiromu Hashimoto

[International presentation] MJIIS 2013 MJIIT - JUC Joint International Symposium (Kanagawa, Japan) ,

2013.11

Oral presentation (general), Malaysia-Japan International Institute of Technology

Proposal of Quality Function Deployment Based on Multispace Design Model and Its Application

Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ICoRD 13 International Conference on Research into Design (St Petersburg, Russia) ,

2013.10

2013.11

Oral presentation (general), ICORD(International Collaboration on Rare Diseases and Orphan Drugs)

Application of Designers' Sketching Skills in Design Education

Yuichi Izu, Koichiro Sato, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ACE 2013 The Asian Conference on Education 2013 (Osaka, Japan) ,

2013.10

Oral presentation (general), The International Academic Forum (IAFOR)

Comparative Analysis of Thinking Process Between Designer and Engineer Based on Case Application of Multispace Design Method

Shuji Takano, Koichiro Sato, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ACE 2013 The Asian Conference on Education 2013 (Osaka, Japan) ,

2013.10

Oral presentation (general), The International Academic Forum (IAFOR)

Basic Study on Optimization of Seat Angles for Lower Limb Blood Flow

Saori Sone, Daisuke Sannan, Takeo Kato, Yoshiyuki Matsuoka, Hiromu Hashimoto

[International presentation] AMRE 2013 International Conference on Advances in Mechanical and Robotics Engineering (zurich, Switzerland) ,

2013.10

Oral presentation (general), London Research Press in association with Institute of Research Engineers and Doctors (IRED)

Quality Function Deployment Applying Structural Model

Takeo Kato

[International presentation] AMRE 2013 International Conference on Advances in Mechanical and Robotics Engineering (zurich, Switzerland ) ,

2013.10

Oral presentation (general), London Research Press in association with Institute of Research Engineers and Doctors (IRED)

Access to Document (DOI)

Quality Function Deployment using Design Structure Matrix

Takeo KATO, Shigehiro HORIUCHI, Toshiharu MIWA, Yoshiyuki MATSUOKA

[Domestic presentation] 2013Y Autumn Meeting (Meijo University, Tenpaku Campus) ,

2013.10

Oral presentation (general), Japan Society for Design Engineering

Optimization of Cushion and Back Angles of Chair for preventing Limb Blood Flow decline

Saori SONE, Daisuke SANNAN, Masahiro NISHIGUCHI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2013Y Autumn Meeting (Meijo University, Tenpaku Campus) ,

2013.10

Oral presentation (general), Japan Society for Design Engineering

Proposal of Multispace Quality Function Deployment using ISM and DSM

Takeo KATO, Shigehiro HORIUCHI, Koichiro SATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 23rd Design Engineering & Systems Division Lecture (Yomitan Village, Okinawa) ,

2013.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Access to Document (DOI)

A Robust Design includes the Factor Determination Method based on M model

Daisuke SANNAN, Takeshi KITAMURA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 23rd Design Engineering & Systems Division Lecture (Yomitan Village, Okinawa) ,

2013.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Access to Document (DOI)

Robust Optimization of Adjustable Control Factors Using Particle Swarm Optimization

Takeo Kato, Koichiro Sato, Yoshiyuki Matsuoka

[International presentation] ECAL 2013 12th European Conference on Artificial Life (Taormina, Italy) ,

2013.09

Oral presentation (general), the European Conference on Artificial Life

Structural Model of Sketching Skills and Analysis of Designers’ Sketches

Yuichi Izu, Koichiro Sato, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] IASDR2013 International Association of Societies of Design Research 2013 (Shibaura Institute of Technology) ,

2013.08

Oral presentation (general), Science Council of Japan (SCJ) ，Japan Society of Kansei Engineering

The differences in the sketching skills between designers and students

Yuichi IZU, Koichiro SATO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 60th Annual Meeting (University of Tsukuba) ,

2013.06

Oral presentation (general), Japanese Society for the Science of Design

Access to Document (DOI)

Quality Function Deployment Using Interpretive Structural Modeling

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2013Y Spring Research Presentation Lecture (Kokushikan University, Setagaya Campus, Umegaoka Building) ,

2013.05

Oral presentation (general), Japan Society for Design Engineering

Robust Design Method to Derive Optimum Adjustable Range using PSO method

Masatoshi MURAMATSU, Takeo KATO

[Domestic presentation] 2013Y Spring Meeting (Kokushikan University, Setagaya Campus, Umegaoka Building) ,

2013.05

Oral presentation (general), Japan Society for Design Engineering

Basic study on Optimization of Cushion and Back angle of Chair for preventing Limb blood flow decline

Saori SONE, Daisuke SANNNAN, Masahiro NISHIGUCHI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2013Y Spring Meeting (Kokushikan University, Setagaya Campus, Umegaoka Building) ,

2013.05

Oral presentation (general), Japan Society for Design Engineering

Robust Design Method for Setting a correlation of Factors Adjusted by Adjustable Mechanism

Keigo YAMAMOTO, Suguru KIMURA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2013Y Spring Meeting (Kokushikan University, Setagaya Campus, Umegaoka Building) ,

2013.05

Oral presentation (general), Japan Society for Design Engineering

Robust Design Method Using Adjustable Control Factors

Suguru Kimura, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] ACDDE2012 Asian Conference on Design and Digital engineering 2012 (Hokkaido, Japan) ,

2012.12

Oral presentation (general), The Japan Society of Mechanical Engineers

Structural Model of Sketching Skills for Design Education

Yuichi Izu, Koichiro Sato, Takeo Kato, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] ACE2012 The Asian Conference on Education 2012 (Osaka, Japan) ,

2012.10

Oral presentation (general), The International Academic Forum (IAFOR)

Proposal of QFD based on Multispace Design Model and Interpretive Structural Modeling

Shigehiro HORIUCHI, Ryota TADOKORO, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2012 (Kyoto University, Clock Tower Centennial Museum) ,

2012.10

Oral presentation (general), Japan Institute of Architecture, The Society of Japan Mechanical Engineers, The Japan Society for Precision Engineering, The Society of Japan Design Engineering, The Japan Society of Japan Design, The Japanese Society for Artificial Intelligence

Multipurpose Ergonomic Design Method Considering Mechanical and Physiological Characteristics

Saori SONE, Shota MATSUNASE, Takeshi KITAMURA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2012Y Autumn Meeting (Toyama International Conference Center, Otemachi Forum) ,

2012.09

Oral presentation (general), Japan Society for Design Engineering

Proposal of a Quality Function Deployment based on the Multispace Design Model

Takeo KATO, Shigehiro HORIUCHI, Yoshiyuki MATSUOKA

[Domestic presentation] The 22nd Design Engineering and Systems Division Lecture (Hiroshima University, School of Engineering) ,

2012.09

Oral presentation (general), The Japan Society of Mechanical Engineers

Structural Model of Sketching Skills in Product Design

Yuichi IZU, Koichiro SATO, Takeo KATO, Yoshiki UJIIE, Yoshiyuki MATSUOKA

[Domestic presentation] The 59th Annual Meeting (Sapporo City University) ,

2012.06

Oral presentation (general), Japanese Society for the Science of Design

Quality Function Deployment Based on Multispace Design Model and Interpretive Structural Modeling

Takeo Kato, Shigehiro Horiuchi , Yoshiyuki Matsuoka

[International presentation] UMTIK 2012 International Conference on Machine Design and Production (Pamukkale, Denizli, Turkey) ,

2012.06

Oral presentation (general), the UMTIK Organizing Committee

Method for Setting Factors in Robust Design of Adjustable Mechanisms

Takeo KATO, Suguru KIMURA, Yoshiyuki MATSUOKA

[Domestic presentation] The 17th Computational Engineering Conference (Kyoto Education and Culture Center) ,

2012.05

Oral presentation (general), The Japan Society for Computational Engineering and Science

Method for Setting Adjustable Control Factors and Their Dependent of Independent Relationship in Adjustable Mechanism Design

Suguru KIMURA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2012Y Spring Meeting (Keio University, Hiyoshi Campus, Raiosha ) ,

2012.05

Oral presentation (general), Japan Society for Design Engineering

Robust Design Method for Variable Mechanism with Discrete Adjustment

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2011Y Autumn Research Presentation Lecture (Osaka Electro-Communication University) ,

2011.10

Oral presentation (general), Japan Society for Design Engineering

Mathematical Consideration on a Robustness Index for Adjustable Control Factors

Takeo Kato, Suguru Kimura, Yoshiyuki Matsuoka

[International presentation] The 2011 International Conference on Materials and Products Manufacturing Technology (Guangzhou, China) ,

2011.09

Oral presentation (general)

A Proposal of Robust Design Method for Deriving Adjustable Range

Suguru Kimura, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] The 2011 International Conference on Advanced Design and Manufacturing Engineering (Guangzhou, China) ,

2011.09

Oral presentation (general)

Design of Seat-Swing Function Considering Human State Quantity in Diverse Conditions

Takeshi KITAMURA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 58th Annual Meeting (Chiba Institute of Technology ) ,

2011.06

Oral presentation (general), Japanese Society for the Science of Design

Comparison among "Field" Concepts in Various Disciplines based on the Multispace Design Model for Construction of "Design Circumstance"

Shoki KAWANISHI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 58th Annual Meeting (Chiba Institute of Technology ) ,

2011.06

Oral presentation (general), Japanese Society for the Science of Design

An Overview of Robust Design: for Safe Society and Manufacturing

Takeo KATO, Suguru KIMURA, Yoshiyuki MATSUOKA

[Domestic presentation] The 58th Annual Meeting (Chiba Institute of Technology ) ,

2011.06

Oral presentation (general), 日本デザイン学会

Robust Design Method for Adjustable Control Factors and Case Applications

Takeo KATO, Suguru KIMURA, Yoshiyuki MATSUOKA

[Domestic presentation] The 16th Computational Engineering Conference (The University of Tokyo, Kashiwa Campus Research Building) ,

2011.05

Oral presentation (general), The Japan Society for Computational Engineering and Science

Robust design method for adjustable control factors

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 20th Design Engineering & Systems Division Lecture (National Institute of Advanced Industrial Science and Technology （AIST）) ,

2010.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Robust design method for objective characteristics with nonnormal distributions and control factors with adjustable range

Takeo Kato, Atsuki Watai, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] UMTIK 2010 International Conference on Machine Design and Production (Guzelyurt, Turkey) ,

2010.06

2010.07

Oral presentation (general), the UMTIK Organizing Committee

Proposal of a Robust Design Method for Decision Problems of Optimum Adjustable Range and Optimum Multilevel

Atsuki WATAI, Satoshi NAKATSUKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 19th Design Engineering & Systems Division Lecture (Yomitan, Okinawa) ,

2009.10

Oral presentation (general), The Japan Society of Mechanical Engineers

Proposal of Robust Design Method for Diverse Conditions in Consideration of Cost

Atsuki Watai, Takeo Kato, Yoshiyuki Matsuoka

[International presentation] International Association of Societies of Design Research 2009 (Seoul, KOREA) ,

2009.10

Oral presentation (general), International Association of Societies of Design Research (IASDR)

Robust Design Methods for Universal Design

Takeo Kato, Atsuki Watai, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] International Association of Societies of Design Research 2009 (Seoul, KOREA) ,

2009.10

Oral presentation (general), International Association of Societies of Design Research (IASDR)

Robust Design Method for Diverse Conditions

Atsuki Watai, Satoshi Nakatsuka, Takeo Kato, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] The 2009 ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference (San Diego, United States) ,

2009.08

2009.09

Oral presentation (general), he Japan Society of Mechanical Engineers

Proposal of Robust Design Method for Diverse Conditions in Consideration of Cost

Atsuki WATAI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 56th Annual Meeting (Nagoya City University) ,

2009.06

Oral presentation (general), Japanese Society for the Science of Design

Robust Design for Diverse Conditions

Takeo KATO, Satoshi NAKATSUKA, Atsuki WATAI, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2008 (Keio University, Faculty of Science and Technology, Yagami Campus) ,

2008.11

Cost Evaluation of Robust Design for Diverse Conditions

Atsuki WATAI, Satoshi NAKATSUKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2008 (Keio University, Faculty of Science and Engineering, Yagami Campus) ,

2008.11

Construction of Robust Design Method for Adjustable Mechanism and Case Applications

Satoshi NAKATSUKA, Atsuki WATAI, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2008 (Keio University, Faculty of Science and Engineering, Yagami Campus) ,

2008.11

A Proposal of Robust Design Method using the New Evaluation Indexes

Satoshi Nakatsuka, Takeo Kato, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] The 9th Cairo University International Conference on Mechanical Design and Production (Cairo, Egypt) ,

2008.01

Oral presentation (general)

A Proposal of Robust Design Method Applicable to Diverse Design Problems

Satoshi Nakatsuka, Takeo Kato, Yoshiki Ujiie, Yoshiyuki Matsuoka

[International presentation] International Association of Societies of Design Research 2007 (HongKong, China) ,

2007.11

Oral presentation (general), International Association of Societies of Design Research (IASDR)

A Development of New Robust Design Method for Diverse Conditions

Satoshi NAKATSUKA, Takeo KATO, Yoshiki UJIIE, Yoshiyuki MATSUOKA

[Domestic presentation] The 17th Design Engineering & Systems Division Lecture (Sendai City War Damage Restoration Memorial Museum) ,

2007.10

2007.11

Oral presentation (general), The Japan Society of Mechanical Engineers

An Extraction of Problems for Robust Design and A Proposal of New Method for Diverse Design Problems

Satoshi NAKATSUKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 54th Annual Meeting (Shizuoka University of Art and Culture) ,

2007.06

Oral presentation (general), Japanese Society for the Science of Design

Proposal of Robust Design Method for Various Design Sites and Application of Case Studies to Public Seats

Satoshi NAKATSUKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2007Y Spring Research Presentation Lecture (Kanto Gakuin University, Yokohama Kannai Campus) ,

2007.05

Oral presentation (general), Japan Society for Design Engineering

Classification of Robust Design Methods and Proposal of Selection Guidelines

Satoshi NAKATSUKA, Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2006Y Autumn Research Presentation Lecture (Aobayama Memorial Hall, School of Engineering, Tohoku University) ,

2006.10

Oral presentation (general), Japan Society for Design Engineering

Proposal of Robust Design Method for Variety of Conditions and its Application to the Design of Automotive Seat

Takeo KATO, Kazutaka TOZAWA, Yuji NOMURA, Yoshiki UJIIE, Yoshiyuki MATSUOKA

[Domestic presentation] Design Symposium 2006 (Waseda University, Okubo Campus) ,

2006.07

Proposal of Robust Design Method for Variey of Conditions and Its Application

Takeo KATO, Kazutaka TOZAWA, Yuji NOMURA, Yoshiki UJIIE, Yoshiyuki MATSUOKA

[Domestic presentation] The 53rd Annual Meeting (21st Century Museum of Contemporary Art, Kanazawa・JAIST) ,

2006.06

2006.07

Oral presentation (general), Japan Society for Design Engineering

Basic Study on Classification Scheme for Robust Design Methods

Takeo Kato, Tetsuo Ikeyama, Yoshiyuki Matsuoka

[International presentation] International Conference on Design Engineering and Science (ICDES) 2005 (Vienna, Austria) ,

2005.10

Oral presentation (general), Japan Society for Design Engineering

Basic Research on Classification System of Robust Design Method

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] 2005Y Autumn Meeting (Tokushima University) ,

2005.08

Oral presentation (general), Japan Society for Design Engineering

A Proposal of Robust Modeling Method for Objective Characteristic with Nonnormal Distribution

Takeo KATO, Yoshiyuki MATSUOKA

[Domestic presentation] The 15th Design Engineering & Systems Division Lecture (Hokkaido University Conference Hall) ,

2005.08

Oral presentation (general), The Japan Society of Mechanical Engineers

Access to Document (DOI)

Artificial Joint System Interacting with Organism

Takeo Kato, Yutaka KAMEYAMA, Tokuhiro MORIYA, Masato INOUE, Makoto WATANABE, Yoshiyuki Matsuoka

[Domestic presentation] 2004Y Japan Design Society Autumn Meeting (Keio University, Yagami Campus) ,

2004.11

Other, Japanese Society for the Science of Design

　 Previous page - Next page 　

Kato, Takeo

Presentations -